C1.5 REQ ATTACHMENT.xls
XLS spreadsheet 63 KB Posted
- Attached to
- BRAND NAME ESS INSTALLATION MATERIALS Federal contract opportunity
- Solicitation number
- N66001-19-Q-6491
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| C1.5 COMBINED SYNOPSIS AND SOL BN NAME ESS MATERIALS.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
GOV'T MATERIAL
| ITEM NO | NOMENCLATURE | TECHNICAL SPECIFICATIONS | MFR/VENDOR | PART NO. | BRAND NAME OR EQUIVALENT | U/I | QTY REQD |
| 1 | UPS, RACK MOUNT, 1500VA 2RU | Minimum Output Volt Amp Capacity (VA):1500. Minimum Output kVA Capacity (kVA):1.5. Minimum Output Watt Capacity (Watts):1350. Minimum Output kW Capacity (kW):1.35. Maximum output capacity ratings is reduced to 1215 watts at 115V nominal and 1080 watts at 100V nominal; Maximum output ratings are reduced in frequency regulation / conversion mode (127/120V 945 watts / 115V 850 watts / 110V 804 watts / 100V 756 watts), Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150% load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE bypass limits) Power Factor:0.9. Crest Factor:3:1. Nominal Output Voltage(s) Supported:100V; 110V; 115V; 120V; 127V. Nominal Voltage Details:120V factory-default nominal voltage; Less than 3% THD for linear loads and less than 5% for non-linear computer loads. Frequency Compatibility:50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion. Output Voltage Regulation (Line Mode):+/- 2%. Output Voltage Regulation (Economy Line Mode):+/- 10%. Output Voltage Regulation (Battery Mode):+/- 3%. Output Receptacles:(6) 5-15R Load Management Receptacles:Two switchable three-outlet 5-15R load banks. Output AC Waveform (AC Mode):Pure Sine wave. Output AC Waveform (Battery Mode):Pure Sine wave. Individually Controllable Load Banks:Yes. Rated input current (Maximum Load):12A. Nominal Input Voltage(s) Supported:100V AC; 110V AC; 115V AC; 120V AC; 127V AC. Nominal Input Voltage Description:120V factory default. UPS Input Connection Type:5-15P. Input Circuit Breakers:20A. UPS Input Cord Length (ft.):10. UPS Input Cord Length (m):3.1. Recommended Electrical Service:15A 120V. Input Phase:Single-Phase. Full Load Runtime (min.):4.2 min. (1350w). Expandable Battery Runtime:Extended runtime supported via optional external battery packs. DC System Voltage (VDC):48. Battery Recharge Rate (Included Batteries):Less than 3 hours recharge to 90%; Add 6 hours per BP48V27-2US (typical, full load discharge). Voltage Regulation Description:Online, double-conversion power conditioning maintains 2% output voltage regulation during brownouts and overvoltages. Overvoltage Correction :Corrects overvoltages to 150V (0-100% load). Undervoltage Correction :Corrects undervoltages to 100V at full load (90V at 100V nominal). Severe Undervoltage Correction:Corrects brownouts to 70V (70% load) & 55V (33% load). Front Panel LCD Display:Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, and alarm function. 2 switches control off/on power status and alarm-cancel operation; 2 additional scroll-down and scroll-up / select options enable LCD status viewing and configuration options. Alarm Cancel Operation:Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available. Audible Alarm:Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions. 7 front panel LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, eco mode operation, bypass mode operation and AC output status. UPS AC Suppression Joule Rating:570. UPS AC Suppression Response Time:Instantaneous. UPS Dataline Suppression:1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet. EMI / RFI AC Noise Suppression:Yes. |
PHYSICAL
Installation Form Factors Supported with Included Accessories:4 post 19 inch rackmount Included Mounting Accessory Description:Included 4POSTRAILKIT mounting bracket enables installation in 4 post racks from 20.5 to 36 inches (521 to 914mm) Installation Form Factors Supported with Optional Accessories:2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND) Optional Mounting Accessory Notes:Optional 2-9USTAND enables upright tower UPS placement; 2POSTRMKITWM enables wall-mount and 2-post rackmount installation; 4POSTRAILKITWM enables installation in 4-post short-depth racks from 14.5 to 23.5 inches (368 to 597mm); UPSHDEARKIT enables installation in 2 or 4-post racks using front vertical rails only, without rear support Primary Form Factor:Rackmount UPS Power Module Dimensions (hwd, cm):8.89 x 44.45 x 46.99 Rack Height:2U Minimum Required Rack Depth without External Battery Pack (cm):55 Minimum Required Rack Depth with External Battery Pack (cm):65 Minimum Required Rack Depth without External Battery Pack (in.):21.5 Minimum Required Rack Depth with External Battery Pack (in.):25.5 UPS Power Module Weight (kg):20.50 Shipping Dimensions (hwd / cm):23.37 x 59.18 x 48.77 Shipping Weight (kg):26.31 Cooling Method:Fan UPS Housing Material:Steel Primary UPS Height (mm):89 Primary UPS Width (mm):445 Primary UPS Depth (mm):470
ENVIRONMENTAL
Operating Temperature Range:+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Storage Temperature Range:+5 to +122 degrees Fahrenheit / -20 to +40 degrees Celsius with batteries; -13 to +131 Fahrenheit / -25 to +55 degrees Celsius without batteries Relative Humidity:0 to 95%, non-condensing AC Mode BTU / Hr. (Full Load) :455 AC Economy Mode BTU / Hr. (Full Load):294 Battery Mode BTU / Hr. (Full Load) :559 AC Economy Mode Efficiency Rating (100% Load):94% Operating Elevation (ft.):0-3000m / 0-10,000 ft.
Audible Noise:45 dBA at 1m front side Operating Elevation (m):0 - 3000 m
COMMUNICATIONS
Communications Interface:USB (HID enabled); DB9 Serial; Contact closure; EPO (emergency power off); Slot for SNMP/Web interface Network Management Cards:SNMPWEBCARD; TLNETCARD; WEBCARDLX; MODBUSCARD; RELAYIOCARD Network Monitoring Port Description:Supports detailed monitoring of UPS and site power conditions; DB9 port supports RS232 and contact closure communications PowerAlert Software:For local monitoring via the UPS’s built-in communication ports, download PowerAlert Local software at http://www.tripplite.com/poweralert Communications Cable:USB and DB9 cabling included WatchDog Compatibility:Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time :Zero (0 milliseconds) in double-conversion mode; 4 milliseconds economy mode Low Voltage Transfer to Battery Power (Setpoint):100V at full load (90V full load at 100V nominal setting); 70V at 70% load; 55V at 33% load High Voltage Transfer to Battery Power (Setpoint):150
CERTIFICATIONS
| UPS Certifications:Meets FCC Part 15 Category A (EMI); ROHS (Restriction of Hazardous Substances); Tested to CSA (Canada); Tested to UL1778 (USA) | TRIPPLITE | SU1500RTXLCD2U | EQUIVALENT | EA | 2 |
| 2 | PACK, BATTERY, UPS | Input Phase:Single-Phase |
Battery DC System Voltage (VDC):48 Battery Pack Accessory (Optional): 48VDCSPLITTER (*Limit 2 BP48V24-2U with 48VDCSPLITTER) UPS Connection:Attached cable with blue 175 amp DC connector Typical Battery Lifespan:4-6 years typical (North America) Installation Form Factors Supported with Included Accessories:4 post 19 inch rackmount Installation Form Factors Supported with Optional Accessories:2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND); 2-4 post front rail rackmount (UPSHDEARKIT) Minimum Required Rack Depth (cm):52.07 Shipping Dimensions (hwd / cm):22.61 x 59.44 x 49.53 Shipping Weight (kg):31.84 Unit Dimensions (hwd / cm):8.9 x 44.5 x 34.3 Unit Weight (kg):28.58 External Battery Pack Form Factor:Rack/Tower
| Certifications:Tested to UL, CE, NOM | TRIPPLITE | BP48V24-2U | EQUIVALENT | EA | 2 | |||
| 3 | SWITCH, NETWORK, IP | Catalyst, 8-port network switch with CAB-TA-NA AC Type A Power Cable | CISCO | WS-C3560CX-8TC-S | BRAND NAME | EA | 4 | |
| 4 | MODULE, TRANCEIVER, SWITCH | 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM | CISCO | GLC-LH-SMD++= | BRAND NAME | EA | 4 | |
| 5 | KIT, RACKMOUNT SWITCH | 19in RackMount for Catalyst 3560,2960,ME-3400 Compact Switch | CISCO | RCKMNT-19-CMPCT= | BRAND NAME | EA | 4 | |
| 6 | LICENSE, CATALYST | 3560-CX IP Base to IP Services Electronic RTU License with L-C3560CX-RTU= SW License | CISCO | L-C3560CX-12-S-E | BRAND NAME | EA | 4 | |
| 7 | POWER SUPPLY, 12VDC WITH ENCLOSURE | Input Input 115VAC, 60Hz, 2.6A. Input fuse rated @ 5A/250V. Output 12VDC output. 10A continuous supply current.Output fuse rated @ 15A/32V. Filtered and electronically regulated output. Short circuit and thermal overload protection. Battery Backup Built-in charger for sealed lead acid or gel type batteries. |
Automatic switch over to stand-by battery when AC fails.
Supervision AC fail supervision (form "C" contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form "C" contacts).
Battery presence supervision (form "C" contacts).
Visual Indicators AC input and DC output LED indicators.
Temperature Operating 0 to 49° C (32 to 120° F ).
Storage - 20 to 70° C ( - 4 to 158° F).
Relative Humidity 85% +/- 5% BTU/Hr. (approx.): 61 BTU/Hr.
System AC input VA requirement: 299VA.
| Enclosure: Wall mount enclosure for indoor use. Accommodates up to one (1) 12VDC/12AH Batteries. Dimensions 12.25"W x 15.5"H x 4.5"D (311 mm W x 394 mm H x 114 mm D). 1.125" and 1.375" combination knockouts. | ALTRONIX | AL1012ULX | EQUIVALENT | EA | 5 |
| 8 | POWER SUPPLY, 24VDC WITH ENCLOSURE | Input Input 115VAC, 60Hz, 4.2A. Input fuse rated @ 3.5A/250V. Output 24VDC output. 10A continuous supply current.Output fuse rated @ 15A/32V. Filtered and electronically regulated output. Short circuit and thermal overload protection. Battery Backup Built-in charger for sealed lead acid or gel type batteries. |
Automatic switch over to stand-by battery when AC fails.
Supervision AC fail supervision (form "C" contacts).
Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
Low battery supervision (form "C" contacts).
Battery presence supervision (form "C" contacts).
Visual Indicators AC input and DC output LED indicators.
Temperature Operating 0 to 49° C (32 to 120° F ).
Storage - 20 to 70° C ( - 4 to 158° F).
Relative Humidity 85% +/- 5% BTU/Hr. (approx.): 61 BTU/Hr.
System AC input VA requirement: 483VA.
| Enclosure: Wall mount enclosure for indoor use. Accommodates up to two (2) 12VDC/12AH Batteries. Dimensions 12.25"W x 15.5"H x 4.5"D (311 mm W x 394 mm H x 114 mm D). 1.125" and 1.375" combination knockouts. | ALTRONIX | AL1024ULX | EQUIVALENT | EA | 3 |
| 9 | DISTRIBUTION BLOCK, POWER 8-OUTPUT, FUSED | Input Up to 28VAC or 28VDC operation @ 12A max. Outputs Eight (8) individually fused outputs. Fuses rated @ 3.5A/250V |
Surge suppression. LED Indicators Power LED indicator. Power ON/OFF switch.
Temperature Operating: 0° C to 49° C (32° F to 120° F). Storage: - 20° C to 70° C ( - 4° F to 158° F). Relative Humidity 85% +/- 5%.
| Dimensions (approximate): 3.25"W x 5.25"L x 1"H (82.55 mm W x 133.35 mm L x 25.4 mm H). | ALTRONIX | PD8 | EQUIVALENT | EA | 12 |
| 10 | DISTRIBUTION BLOCK, POWER 16-OUTPUT | Input Up to 28VAC or 28VDC operation @ 12A max. Outputs Eight (8) individually fused outputs. Fuses rated @ 3.5A/250V |
Surge suppression. LED Indicators Power LED indicator. Power ON/OFF switch.
| Temperature Operating: 0° C to 49° C (32° F to 120° F). Storage: - 20° C to 70° C ( - 4° F to 158° F). Relative Humidity 85% +/- 5%. Dimensions: 3.25"Wx5.25"Lx1"H | ALTRONIX | PD16W | EQUIVALENT | EA | 5 | |||
| 11 | BATTERY, 12VDC | Rechargeable Sealed Lead Acid Battery 12VDC, 12AH Gel Sealed Battery, with quick disconnect tabs, Maximum dimensions L:5.94" W: 3.86" HT: 3.86" | POWER SONIC | PS-12120 | EQUIVALENT | EA | 8 | |
| 12 | SENSOR, MOTION, REQUEST TO EXIT | 12-30VDC Sensor, Passive Infrared with Sequential Logic Input and 8'x10' detection area. | BOSCH | DS160 | BRAND NAME | EA | 10 | |
| 13 | SENSOR, MOTION 360-DEGREE | 9-15VDC Sensor, Passive Infrared with 70' detection range | BOSCH | DS939 | BRAND NAME | EA | 30 | |
| 14 | PLATE, TRIM FOR DS160 | Mounting Plate for DS160 on Single Gang Box | BOSCH | TP160 | BRAND NAME | EA | 10 | |
| 15 | SENSOR, DOOR, HIGH SECURITY SINGLE CONTACT | UL634 Level 2 SPDT Door Sensor, Surface Mount | MAGNASPHERE | L2S-000 | BRAND NAME | EA | 10 | |
| 16 | SENSOR, DOOR, HIGH SECURITY DUAL CONTACT | UL634 Level 2 DPDT Door Sensor, Surface Mount | MAGNASPHERE | L2D-010 | BRAND NAME | EA | 10 | |
| 17 | SENSOR, DOOR, HIGH SECURITY | UL634 Level 1 DPDT Door Sensor, Surface Mount | GE SECURITY | 2707AD-L | BRAND NAME | EA | 10 | |
| 18 | SENSOR, TAMPER, PLUNGER TYPE | SPDT Switch with 3-position Push-Momentary Pull-Maintained Threaded Plunger, Screw Terminations. Plunger maximum free position 0.375", plunger minimum operating position 0.203", plunger maximum depressed condition 0.125". Contact current maximum: 4A (DC), Contact voltage maximum: 250V (DC). | HONEYWELL | 2AC59 | EQUIVALENT | EA | 10 | |
| 19 | SENSOR, MOTION, OUTDOOR | 8.5-20VDC Dual Technology, Infrared and Microwave Sensor with SPDT Dry Contact Relay, Outdoor Rated, -30-130F | SDI | SDI-76XL-MIL | BRAND NAME | EA | 8 | |
| 20 | STRIKE, DOOR | SS Tamper-resistant 12/24VDC Electric Strike, ANSI/BHMA A156.31, Grade 1, UL 1034, NFPA-252 compliant | HES | 1006CS-630-LBM | BRAND NAME | EA | 6 | |
| 21 | ENCLOSURE, 30"x20"x6" | NEMA4,12,13 30”x20”x6” Enclosure with Mounting Panel for 28.2”x18.2” mounting plate 16 gauge steel • Seams continuously welded and ground smooth • Corner-formed doors • Simple easy-to-remove and install hinge pins with captivation clip • High-torque threadless studs and fasteners on door • Minimum-width body flange provides maximum door opening • Door opens 210 degrees • External formed body flange • Panel mounting studs fit optional CONCEPT panels and other accessories • Mounting holes in back of body for direct mounting or optional external mounting brackets • Removable door with hidden hinges for clean, aesthetic appearance • Seamless foam-in-place gasket • Quarter-turn slotted latch • Hardware kit with panel mounting nuts, panel grounding hardware and sealing washers | HOFFMAN | CSD30206LG | EQUIVALENT | EA | 2 | |
| 22 | ENCLOSURE, 20"x24"x6" | NEMA4,12,13 20"x24"x6" Steel Enclosure with Mounting Panel for 20..2”x18.2” mounting plate 16 gauge steel • Seams continuously welded and ground smooth • Corner-formed doors • Simple easy-to-remove and install hinge pins with captivation clip • High-torque threadless studs and fasteners on door • Minimum-width body flange provides maximum door opening • Door opens 210 degrees • External formed body flange • Panel mounting studs fit optional CONCEPT panels and other accessories • Mounting holes in back of body for direct mounting or optional external mounting brackets • Removable door with hidden hinges for clean, aesthetic appearance • Seamless foam-in-place gasket • Quarter-turn slotted latch • Hardware kit with panel mounting nuts, panel grounding hardware and sealing washers | HOFFMAN | CSD20246LG | EQUIVALENT | EA | 2 | |
| 23 | PLATE, MOUNTING FOR CSD3020 | 28.2"x18.2" 12-Ga Painted Steel Plate for Mounting Inside CSD30206 Enclosures | HOFFMAN | CP3020 | EQUIVALENT | EA | 2 | |
| 24 | PLATE, MOUNTING FOR CSD2024 | 22.2"x18.2" 12-Ga Painted Steel Plate for Mounting Inside CSD20246 Enclosures | HOFFMAN | CP2420 | EQUIVALENT | EA | 2 | |
| 25 | SET, KEY LOCK AND HANDLE | Key Lock and Handle Set for Hoffman Enclosure | HOFFMAN | CWHK | EQUIVALENT | EA | 4 | |
| 26 | CABLE, RISER, 22-8 | 22AWG, 8-Conductor Stranded Shielded Riser-rated Cable 1000' | HONEYWELL | 22071109 | EQUIVALENT | EA | 10 | |
| 27 | CABLE, CM 22-4 | 22AWG, 4-Conductor Stranded Unshielded Cable 1000' | HONEYWELL | 21041109 | EQUIVALENT | EA | 10 | |
| 28 | CABLE, RISER, 22-4 | 22AWG, 4-Conductor Stranded Shielded Riser-rated Cable 1000' | HONEYWELL | 22041109 | EQUIVALENT | EA | 1 | |
| 29 | CABLE, RISER, 18-4 | 18AWG, 4-Conductor Stranded Unshielded Riser-rated Cable 1000' | HONEYWELL | 21151109 | EQUIVALENT | EA | 10 | |
| 30 | CABLE, RISER, 18-2 | 18AWG, 2-Conductor Stranded Unshielded Riser-rated Cable 1000' | HONEYWELL | 21141109 | EQUIVALENT | EA | 5 | |
| 31 | CABLE, OUTDOOR, 18-6 | 18AWG, 6-Conductor Stranded Outdoor-rated Cable 1000' | HONEYWELL | 41581008 | EQUIVALENT | EA | 8 | |
| 32 | CABLE, RISER, CAT6 | CAT6 23AWG, 4-Pair Riser-rated Cable 1000' | HONEYWELL | 50922101 | EQUIVALENT | EA | 2 | |
| 33 | RACK, COMPUTER EQUIPMENT | The enclosure shall be UL listed to UL60950-1 (Standard for Information Technology |
and Communications Equipment, Cabinet, Enclosure and Rack Systems.) and also shall be 19” EIA 310-D compliant.
Overall dimensions of enclosure shall be 48”H with width of 24” and a depth of 32”. Enclosure shall be made out of a minimum of 16-gauge cold rolled steel.
Enclosure shall have front and rear doors with lockable swing handles. Doors to be field reversible without additional hardware. All doors and sides to be gasketed w/ neoprene foam and have a #10-32 x ½ copper ground stud. Top panel shall be removable with horseshoe knockouts. Side panels shall have quick release latches and be locking.
Mounting rails shall be fully adjustable universal (M6) with RMU markings.
Rails shall be #12 Ga. Powder-coated and have round cable pass through holes with cable management tie down slots both vertical and horizontal.
Bottom of enclosure shall have two (2) #10-32 x ½ copper ground studs plus four (4) 3/4” thru holes for bolting to floor and provision for casters and or leveling glides. Floor access opening shall be 11.50”W x 14.75”D with #10-32 blind treaded inserts for optional bottom panels.
Manufacturer shall ship enclosure assembled including accessories like shelves & power strips.
| Manufacturer shall be ISO 9001:2000 Registered | GREAT LAKES | GL480E-2432S | EQUIVALENT | EA | 1 |
| 34 | RACK, COMPUTER EQUIPMENT | The enclosure shall be UL listed to UL60950-1 (Standard for Information Technology |
and Communications Equipment, Cabinet, Enclosure and Rack Systems.) and also shall be 19” EIA 310-D compliant.
Overall dimensions of enclosure shall be 30”H with width of 24” and a depth of 32”. Enclosure shall be made out of a minimum of 16-gauge cold rolled steel.
Enclosure shall have front and rear doors with lockable swing handles. Doors to be field reversible without additional hardware. All doors and sides to be gasketed w/ neoprene foam and have a #10-32 x ½ copper ground stud. Top panel shall be removable with horseshoe knockouts. Side panels shall have quick release latches and be locking.
Mounting rails shall be fully adjustable universal (M6) with RMU markings.
Rails shall be #12 Ga. Powder-coated and have round cable pass through holes with cable management tie down slots both vertical and horizontal.
Bottom of enclosure shall have two (2) #10-32 x ½ copper ground studs plus four (4) 3/4” thru holes for bolting to floor and provision for casters and or leveling glides. Floor access opening shall be 11.50”W x 14.75”D with #10-32 blind treaded inserts for optional bottom panels.
Manufacturer shall ship enclosure assembled including accessories like shelves & power strips.
| Manufacturer shall be ISO 9001:2000 Registered. | GREAT LAKES | GL300E-2432S | EQUIVALENT | EA | 1 | ||
| 35 | ESTIMATED SHIPPING | DOOR TO DOOR SHIPPING VIA COMMERCIAL AIR TO JAPAN | AU | 1 | |||
| REQUIREMENT FOR BRAND NAME EQUIPMENT FOR ESS INSTALLATION IN JAPAN. IF YOU ARE INCLUDING SHIPPING COST IN THE PRICES IT MUST BE EXPLICITYLY STATED ON YOUR QUOTE. | |||||||
| “SHIPPING NOT PRICED SEPARATELY, TOTAL PRICE INCLUDES SHIPPING TO JAPAN”. MODIFICATION FOR SHIPPING NOT QUOTED WILL NOT BE AUTHORIZED. IF YOU LIST SHIPPING AS A SEPARATE CLIN YOU MUST ALSO INVOICE SEPARATELY | |||||||
| AND UPLOAD PROOF OF ACTUAL SHIPPING COST. ANY ITEM WITH A UNIT PRICE OF $5K OR GREATER WILL REQUIRE IUID LABELS WHICH CAN BE ATTACHED TO THE ITEM OR PLACED LOOSELY IN THE PACKAGING. | |||||||
| ALL ITEMS MUST BE BRAND NEW AND UN-OPENED IN THE ORIGINAL PACKAGING. PLEASE SEE ATTACHED FOR DELIVERY ADDRESS, AND TO ENTER PRICING AND DELIVERY INFORMATION. | |||||||
| ENTER A NEW CLIN BELOW THE ORIGINAL LINE FOR ANY EOL OR REPLACEMENT ITEM IF APPLICABLE. | |||||||
| SHIP TO ADDRESS: | |||||||
| UNITED STATES ARMY CORP OF ENGINEERS | |||||||
| ATTN: IAN TAKENISHI | |||||||
| KADENA AIR FORCE BASE | |||||||
| BLDG 762, HANGAR 3 | |||||||
| NAKAGAMI-GUN, OKINAWA JAPAN 904-0315 |
File details come from the government source that posted it.