SOW_Revision_1.doc
DOC document 48 KB Posted
- Attached to
- Exit Door Hardware
- Solicitation number
- N64267-16-T-0376
About this file
This a revision to the RFQ that adds another door requiring door hardware replacement bringing the total to 4.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| RFQ_w_CLauses.docx | DOCX document | |
| EXISTING_DOOR_IMG_8566.JPG | JPG image |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
LOCKSMITH ECL-600
PR:
1. INTRODUCTION
The Naval Surface Warfare Center (NSWC), Corona Division, Security Division, Code 105, requires the acquisition of a certified locksmith for the removal of existing hardware and installation of 5 ECL-600’s. The Contractor shall provide all necessary materials and parts needed to complete the job.
2. BACKGROUND
A recent inspection at NSWC Corona revealed that the existing hardware on five (5) exit doors need to be modified to meet requirements. There are three (3) exit doors in building 544 one which is a double door, one (1) exit door in building 547 and one (1) exit door in building 517.
3. SCOPE
The locksmith must remove the existing hardware (see photos) and install an ECL-600 (see attachment 2) on each door identified by the NSWC Corona Division Security representative. There are a total of four (5) doors in this scope of work. There is one double door (2) and three (3) single doors.
4. APPLICABLE DOCUMENTS
Federal Standards: The contractor is required to adhere to all standards and guidelines when applicable. In the absence of named standards, Department of the Navy (DON) standards, applicable Federal Information Processing Standards (FIPS) 201, and broadly accepted professional standards shall prevail as related to the associated industries within the task identified in Section 5.0.
| Document Type |
| No./Version |
| Title |
| Date |
OPNAVINST
| 5530.14E CH-2 |
| Navy Physical Security and Law Enforcement Program. |
| 9/23/2014 |
| DoD |
| 5200.01 Vol. 3 |
| Dept. of Defense Information Security Program |
| 3/19/2013 |
5. REQUIREMENTS
The contractor shall remove the existing hardware (see attachment 1) and install an ECL-600 (see attachment 2) on each door identified by the NSWC Corona Division security representative. There are a total of five (5) doors in this scope of work. There is one double door (2) and three (3) single doors. The key way shall be for a 7-pin core. The ECL-620’s (outside level trim) are not required. Any holes in the door from the existing hardware that are not used with the new ECL-600’s shall be covered with properly fitting cover plates.
6. GOVERNMENT FURNISHED PROPERTY
N/A
6.1 Government Furnished Material
N/A
6.2 Government Furnished Equipment
N/A
6.3 Government Furnished Information
N/A
7. DELIVERABLES
N/A
8. ACRONYM LIST
N/A THIS PAGE CONTAINS NECESSARY INFORMATION FOR THE PROCUREMENT ACTION THAT IS PLACED IN OTHER SECTIONS OF THE CONTRACT.
A. REQUIRED DELIVERY DATES
30 days after contract award
B. PLACE OF PERFORMANCE
NSWC Corona Division Attn: Louis Otero, Code 105
1999 Fourth Street
Norco, CA 92860-3864
C. SHIPPING ADDRESS
NSWC Corona Attn: Louis Otero Code 105, BLDG. 501 1999 Fourth Street Norco, CA 92860-3864
D. INSPECTION AND ACCEPTANCE
NSWC Corona Division Attn: Louis Otero Code 105, BLDG. 501 1999 Fourth Street
Norco, CA 92860-3864
E. TECHNICAL POINT OF CONTACT
NSWC Corona Seal Beach
Attn: Louis Otero Code, 105
1999 Fourth Street
Norco, CA 92860-3864
File details come from the government source that posted it. Updated .