Attachment (1)_UPDATED Statement of Work_Redacted.pdf

STATEMENT OF WORK

Provide Intermodal Container Lifting Frames

1. Description of Requirement:

This requirement is to provide (2ea) 20ft Intermodal Container Lifting Frames for Navy Munitions Command East Asia Division (NMC EAD) .

The contractor will provide (2ea) Intermodal Container Lifting Frames for use at Navy Munitions Command Guam East Asia Division (NMC EAD) All lifting devices will be shipped with load-test certifications and certificate of conformance to ASME B30.20, the Below the Hook industry lifting standard.

2. Application:

Lifting Frames shall be used to couple, lift, transport and discharge ISO and American National

Standards Institute (ANSI) series freight containers used in intermodal ( land, air, rail, marine) service between highway semitrailers, railroad cars, ocean –going ships and storage areas.

3. Associated Equipment:

Docside hoist and cranes, crawler cranes, truck cranes and container handling

Minimum specifications:

Length: 120.00- 480.00 inches Width: 96.00 inches Height: 72.00-120.00 Weight: 1800-6500 lbs SWL: 22400lbs- 72000lbs

Additonal Information:

4.8.2 “Below-the-Hook-Lifting Devices, and Other Rigging Equipment Used in Cargo Transfer.

(Examples of below-the-hook lifting devices requiring third party certification include container spreaders, spreader beams, lifting devices for unique cargo, and bar pallet bridles that have some components that are not off-the-shelf items.) Below-the-hook lifting devices (i.e., does not include common rigging gear) with rated loads greater than 10,000 pounds purchased or manufactured after 21 January 1998 shall have a third party certification by an OSHA recognized agency prior to use. This is a onetime third party certification unless the spreader or device undergoes a repair that requires 4-13 a load test; in that case another third party certification will be required. For Navy owned devices used in cargo transfer, the certification shall be by the Navy Crane Center and shall include an inspection and load test at the test load percentages noted in table 14-1. Proof of load test by the OEM is acceptable in lieu of a load test by the activity. Third party certifications shall be retained in the equipment’s history file for the life of the gear. For contractor owned devices used in cargo transfer, the requirements of 29 CFR 1917.50(c) apply. Third party certification is not required for devices purchased or manufactured prior to 21 January 1998, or for devices with rated capacities of 10,000 pounds or less. For all other rigging equipment used in cargo transfer”

See address below for shipping details.

POC:

Address: DLA Distribution Guam, Marianas Bldg. 2118 Warehouse 9 SUMAY Dr. Santa Rita, Guam 96915-9237 NMCPAC EAD UNIT GUAM (N61055)Attn:

Tel:

3. Required Delivery Date:

September 30, 2025

8. COMMAND’S POCs :