RFC Q0039.docx
DOCX document 111 KB Posted
- Attached to
- USS ANCHORAGE (LPD-23) Exhaust Bellow Hardware
- Solicitation number
- N5523623Q0039
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Revised Product Description.docx | DOCX document | |
| Revised 259-12-001_13-001_PRODUCT DESCRIPTION.docx | DOCX document | |
| Ingalls Sketch_SSDG and MPDE EXHAUST FASTENERS REPLACEMENT.pdf | ||
| 7318373_E.pdf | ||
| PRODUCT DESCRIPTION.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SWRMC
REQUEST FOR SPECIFICATION CLARIFICATION
| DATE OF REQUEST: |
| QUESTION NO: |
| SHIP/HULL NO: USS ANCHORAGE (LPD-23) |
| SOLICITATION NO: N5523623Q0039 |
ITEM NO:
| TITLE: Exhaust Bellow Hardware |
| SWRMC POC & PHONE: Jordan Trujillo |
EMAIL: Jordan.r.trujillo@navy.mil
| PAGE: NO |
| CONTRACTOR: |
| PLANNER’S NAME: |
| ATTACH. NO: |
| CONTRACTOR POC & PHONE: |
CONTRACTOR QUESTION:
ASTM A453 660 (A286 Stainless) is available as 660A, 660B, 660C and 660D. We have worked w/ 660B & 660D. 660B is the most common. We need to know which heat treat is required A, B, C or D? Also is stress rupture required on bar or finished product?
See below for technical information.
DO NOT WRITE BELOW THIS LINE
(FOR SWRMC USE ONLY)
| TECHNICAL REVIEW: |
| SERIAL NO: |
| ITEM |
| NAME OF PART |
| PART NUMBER |
| QTY |
| UNIT OF ISSUE |
| 001 |
| Screw, Heavy Hex Hd Cap, 1-1/4”-7UNC-2A Thd X 4” lg, Chrome Molybdenum, Vanadium |
Finished, Washer Faced, ASTM-A193, GR-B16 N/A
| 224 |
| EA |
| 002 |
| Nut, Heavy Hex Hd, 1-1/4"-7UNC-2B, Chrome |
Molybdenum, Vanadium finished, ASTMA194/
A194, GR16
N/A
| 224 |
| EA |
| 003 |
| Double Locking Tab for 28” Bellow Flange with 1-1/4" Bolt, Make From Sheet, 16 Ga, Cres 316L, (TH)No Oil Between Sheets, Hazardous Material MSDS Required, ASTM-A420, Fin-B, (see Detail 21-B of provided Ingalls Sketch) |
| N/A |
| 112 |
| EA |
IAW PM 220-0003, SURF, Exhaust System; Fasteners Replacement and Hanger Alignment Guidance, material requirements will be changed as follows:
| PLANNER REVIEW |
| DATE: |
| SUPERVISOR REVIEW: |
| DATE: |
| CODE 230 REVIEW: |
| DATE: |
| ADV PLAN REVIEW: |
| DATE: |
| SPEC CHG: Y/N |
| DWG/REF CHG. Y/N |
| RQMTS CHG: Y/N |
| MAT'L CHG: Y/N |
image2.jpeg image3.jpeg image4.jpeg image1.wmf oleObject1.bin
File details come from the government source that posted it. Updated .