Attachment_1_-_TECHNICAL_CAPABILITY_CERTIFICATIONS.docx

N42158-16-T-N004 ATTACHMENT (1)

TECHNICAL CAPABILITY CERTIFICATIONS

Vendor shall self-certify that the equipment and services proposed either meets or does not meet the Government’s minimum requirements specified in the associated Statement of Work (SOW) reference by initialing in the “YES” or “NO” area of the chart below. .

Any deviation to the Government specifications shall identified as such - A detailed explanation shall be provided for each negative response.

Note: In order to be considered for award, the table must be completed in its entirety and submitted with your quotation in accordance with the Instructions of Offerors.

Scope Specifications #’s 1 – 1.3.1

Reference Specifications #’s 2 – 2.2

Compressed Air Supply Parameter Specifications #’s 3.1 – 3.1.2

Equipment Requirement Specifications #’s 3.2 – 3.2.7

Construction Specifications #’s 3.2.8 – 3.2.27

Markings Specifications # 3.3.1

All APPENDIX “A” Specifications

Period of Performance Specification 4.1

Contractor Requirements Specifications #’s 5.1 – 5.19

Preparation for Delivery Specification 5.20.1

Safety Requirements Specification 8.1 – 8.1.c

(Insert full name/title/ date) hereby certifies the equipment/services proposed meet or exceed all Government Minimum Specifications.

(Insert full name/title/ date) hereby certifies the equipment/services proposed meet or exceed the Government Minimum Specifications with the following deviations/exceptions:

(Provide separately detailed explanation for each PWS association)