N3220520Q4136.docx

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220520Q4136 and is being issued as a Request for Quotes (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2020-06 with an effective date of 6 May 2020 located on https://www.acquisition.gov.

4. The associated NAICS code is 811310 and the associated PSC code is J020 for this procurement: NOTE: A Class Waiver is not applicable to a procurement unless the NAICS code, PSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured.

|X| is not being set-aside for small businesses.

|_| is being set-aside for. The small business size standard is [$8M.]

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

SERVICES

Quote shall indicate principal place of performance and country of service origin.

6. The USNS APACHE has a bona-fide need for Original Equipment Manufacturer (OEM) services in order to conduct a complete overhaul and testing of the Aft Electric Capstan to include the electric motor and Stearns Marine Brake. The Period of Performance is 22 June 2020 through 31 Aug 2020 at the contractor’s facility. The resulting contract will be Firm Fixed Price.

7. The required delivery is FOB Destination.

8. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

a. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

b. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

c. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

d. The Government will consider all quotes that are timely received and may consider late quotes. Failure of a quote to address any items required in the submission package may make a quote unacceptable.

e. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price

2. Total Firm Fixed price

3. Any Discount Terms

4. Estimated time of delivery

5. Technical Submission Requirements

a. For a Services buy, the quote shall contain all pre-award submission/certification requirements as defined in the statement of work (SOW).

6. Responses to the solicitation are due 28 May 2020 11:00AM Eastern Standard Time (EST). Quotes may be e-mailed to Molly Dickson at molly.dickson@navy.mil. To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote.

Secondary Point of Contact: Mike Rossik

9. Provision 52.212-2 Evaluation—Commercial Items (Oct 2014) applies to this acquisition.

(a) The Government may award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable offeror in LPTA solicitations.

To be considered a technically acceptable solution for a parts procurement, the quoted parts shall meet the solicitation requirements including required parts, delivery dates, and terms and conditions stated in the solicitation. To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror by the Government within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

10. All Offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items with its offer.

11. Clause 52.212-4 Contract Terms and Conditions – Commercial items, applies to this acquisition.

12. Clause 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders – Commercial Items, applies to this acquisition along with the following FAR Clauses cited in the clause are applicable.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAR 2020)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (AUG 2019) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

X (22) (i) 52.219-28, Post Award Small Business Program Rerepresentation (MAR 2020) (15 U.S.C. 632(a)(2)).

X (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

X (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

X (30)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

X (35)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

X (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (AUG 2011) (E.O. 13513).

X (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

X (57) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C. 3332).

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495).

X (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

X (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

X(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

X (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es): https://www.acquisition.gov/

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://acquisition.gov/far & http://www.acq.osd.mil/dpap/dars/dfarspgi/current

(End of clause)

13. The following additional information is applicable to this acquisition:

252.232-7006 Wide Area WorkFlow Payment Instructions.

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

1. Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

1. Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

1. WAWF access. To access WAWF, the Contractor shall—

2. Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

2. Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

1. WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/

1. WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

1. WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

5. Document type. The Contractor shall submit payment requests using the following document type(s):

0. For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

0. For fixed price line items—

1. That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Commercial Invoice

1. For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Commercial Invoice

0. For customary progress payments based on costs incurred, submit a progress payment request.

0. For performance based payments, submit a performance based payment request.

0. For commercial item financing, submit a commercial item financing request.

5. Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

5. Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Issue By DoDAAC

Admin DoDAAC**

Inspect By DoDAAC

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

5. Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

5. Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

1. WAWF point of contact.

6. The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact: MSCHQ_WAWF@NAVY.MIL

6. Contact the WAWF helpdesk at 866-618-5988, if assistance is needed. (End of clause)

MSC SPECIFIC WIDE AREA WORKFLOW (WAWF) INSTRUCTIONS (AUG 2012)

The information contained in this instruction is supplemental to DFARS 252.232-7006.

The information contained in the table in DFARS 252.232-7006 is for WAWF purposes only. Information included in DFARS 252.232-7006 and this WAWF instruction apply only to WAWF Invoicing and WAWF Receiving Reports. Contradictory information elsewhere in this contract, e.g. Ship to DoDAAC, shall be followed per the terms and conditions of the contract.

When entering the invoice into WAWF, the Contractor shall fill in the DoDAAC fields or DoDAAC extensions exactly as shown in the table in DFARS 252.232-7006. Fields that should not be filled in when entering the invoice into WAWF will be indicated with the direction, "Leave Blank."

In some situations, the WAWF system will pre-populate the "Pay DoDAAC," "Admin By DoDAAC" and "Issue By DoDAAC." The Contractor shall verify that those DoDAACs automatically entered by the WAWF system match the information in the table in DFARS 252.232-7006. If these DoDAACs do not match, then the Contractor shall correct the field(s).

If Receiving Reports are required, ensure that the "Inspection" and "Acceptance" defaults of "destination" for both fields are not changed in the WAWF online interface.

The CLINs on the WAWF invoice shall be entered exactly as set forth in the contract document including CLIN number (e.g. 0001), Quantity (may be adjusted for actual quantity or dollar value delivered and invoiced), and Unit Price (e.g. $1.00). The dollar amounts on each CLIN or SubCLIN on the WAWF invoice shall reflect final performance values, but in no instance can the dollar amount for each CLIN or SubCLIN exceed what is specified in the contract document. The Contractor shall bill to the lowest level, e.g., the SubCLIN level. The Quantity and Unit of Measure fields must be filled out exactly as indicated in the CLINs and SubCLINs to reduce the possibility of the invoice being delayed or rejected during processing.

Before closing out of an invoice session in WAWF, but after submitting the document or documents, the Contractor will be given the option to send additional email notifications by clicking on the "Send More Email Notifications" link that appears on the page. The Contractor shall click on this link and add the Technical Point of Contact's (TPOC) or Contracting Officer's Representative's (COR) email address in the first email address block and add any other additional email addresses desired in the following blocks. This additional notification to the Government is important to ensure the acceptor/receiver is aware that the invoice documents have been submitted into the WAWF system.

Enterprise-Wide Contractor Manpower Reporting Application (ECMRA)

The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the Military Sealift Command via a secure data collection site. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

The contractor is required to completely fill in all required data fields using the following web address https://doncmra.nmci.navy.mil.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.

(End Text)

SHIP & BASE ACCESS

Vendors are responsible for correctly submitting forms/applications. Vendors are encouraged to monitor email using “Request a Read Receipt” function and to confirm receipt of facsimile transmissions.

Due to enhanced security measures, ship and base access is required for pre-award ship visits (e.g. ship-check) and for contract performance. Specifically, the following permissions are required:

1. Base/Repair Facility Access Request

2. Vehicle Access Request

3. Ship Access List (vendor-provided)

All forms are available for download on the MSC contracts webpage at http://www.msc.navy.mil. Click on “Contracts” in the upper right corner. Click on “Online Library of Common Documents” for all forms.

Base/Repair Facility Access: Permit is required to access Navy facilities. Base/Repair Facility Access Request is desired seven days prior to ship check or performance start date. Submit forms per the document instruction and to the Port Engineer.

Defense Biometric Identification System (DBIDS) is being implemented for access to DoD facilities in CONUS, HI, Guam and Puerto Rico (replaces RapidGate). Vendor is responsible to acquire DBIDS credentials prior to performance start date. Delays that may result from inadequate planning are contractor responsibility. Vendor instructions and program information is available at https://www.cnic.navy.mil/om/dbids.html. DBIDS credentials require (in succession) (1) Present a letter or official document from the Government sponsoring organization that provides the purpose for your access, (2) Present valid identification, such as a passport or Real ID Act-compliant state driver's license, (3) Present a completed copy of the SECNAV 5512/1 form to obtain your background check, (4) Upon completion of the background check, the Visitor Control Center representative will complete the DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments, and (5) After all of this is done, the contractor will be provided with the DBDIS credential. For vendors with existing Navy Commercial Access Control System (NCACS) cards, see https://www.cnic.navy.mil/om/dbids.html for instructions to obtain DBIDS credentials. Vendor is responsible to confirm that each employee held DBIDS credentials are active for the specific facility and performance period in accordance with DBIDS.

Additional access permissions may be required in the future.

Vehicle Access: Required for vehicle access to Navy facilities. Follow supplemental instructions on Base Access forms or base-specific vehicle access forms.

Ship Access List* (Vendor-Provided): On company letterhead attachment via email, the vendor is required to provide the ship master (courtesy copy the Port Engineer) with an accurate, current list of performing personnel prior to being admitted aboard the vessel. Under no circumstances will a hand-delivered list be accepted.

(End of Text)

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4477 Daniel W. Simms Division of | Revision No.: 14 Director Wage Determinations| Date Of Last Revision: 05/01/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Georgia

Area: Georgia Counties of Brantley Glynn

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.87 01012 - Accounting Clerk II 16.69 01013 - Accounting Clerk III 18.68 01020 - Administrative Assistant 25.79 01035 - Court Reporter 17.11 01041 - Customer Service Representative I 11.19 01042 - Customer Service Representative II 12.59 01043 - Customer Service Representative III 13.73 01051 - Data Entry Operator I 15.11 01052 - Data Entry Operator II 16.48 01060 - Dispatcher Motor Vehicle 21.93 01070 - Document Preparation Clerk 13.62 01090 - Duplicating Machine Operator 13.62 01111 - General Clerk I 12.68 01112 - General Clerk II 13.83 01113 - General Clerk III 18.09 01120 - Housing Referral Assistant 19.08 01141 - Messenger Courier 11.10 01191 - Order Clerk I 12.79 01192 - Order Clerk II 13.69 01261 - Personnel Assistant (Employment) I 15.03 01262 - Personnel Assistant (Employment) II 16.82 01263 - Personnel Assistant (Employment) III 18.74 01270 - Production Control Clerk 21.30 01290 - Rental Clerk 12.50 01300 - Scheduler Maintenance 15.29 01311 - Secretary I 15.29 01312 - Secretary II 17.11 01313 - Secretary III 19.08 01320 - Service Order Dispatcher 19.47 01410 - Supply Technician 25.79 01420 - Survey Worker 14.35 01460 - Switchboard Operator/Receptionist 14.35 01531 - Travel Clerk I 12.79 01532 - Travel Clerk II 13.64 01533 - Travel Clerk III 14.71 01611 - Word Processor I 13.62 01612 - Word Processor II 15.29 01613 - Word Processor III 17.11 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 21.38 05010 - Automotive Electrician 18.41 05040 - Automotive Glass Installer 16.96 05070 - Automotive Worker 16.96 05110 - Mobile Equipment Servicer 14.61 05130 - Motor Equipment Metal Mechanic 19.14 05160 - Motor Equipment Metal Worker 16.96 05190 - Motor Vehicle Mechanic 19.14 05220 - Motor Vehicle Mechanic Helper 13.56 05250 - Motor Vehicle Upholstery Worker 15.76 05280 - Motor Vehicle Wrecker 16.96 05310 - Painter Automotive 18.04 05340 - Radiator Repair Specialist 16.96 05370 - Tire Repairer 13.62 05400 - Transmission Repair Specialist 19.14 07000 - Food Preparation And Service Occupations 07010 - Baker 14.22 07041 - Cook I 13.12 07042 - Cook II 14.76 07070 - Dishwasher 9.99 07130 - Food Service Worker 10.80 07210 - Meat Cutter 14.41 07260 - Waiter/Waitress 9.87 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.48 09040 - Furniture Handler 12.32 09080 - Furniture Refinisher 19.48 09090 - Furniture Refinisher Helper 14.85 09110 - Furniture Repairer Minor 17.08 09130 - Upholsterer 19.48 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.45 11060 - Elevator Operator 12.57 11090 - Gardener 17.87 11122 - Housekeeping Aide 12.57 11150 - Janitor 12.57 11210 - Laborer Grounds Maintenance 13.87 11240 - Maid or Houseman 9.05 11260 - Pruner 12.56 11270 - Tractor Operator 16.72 11330 - Trail Maintenance Worker 13.87 11360 - Window Cleaner 13.89 12000 - Health Occupations 12010 - Ambulance Driver 16.67 12011 - Breath Alcohol Technician 18.45 12012 - Certified Occupational Therapist Assistant 27.76 12015 - Certified Physical Therapist Assistant 25.31 12020 - Dental Assistant 17.87 12025 - Dental Hygienist 34.82 12030 - EKG Technician 27.96 12035 - Electroneurodiagnostic Technologist 27.96 12040 - Emergency Medical Technician 16.67 12071 - Licensed Practical Nurse I 16.49 12072 - Licensed Practical Nurse II 18.45 12073 - Licensed Practical Nurse III 20.57 12100 - Medical Assistant 14.50 12130 - Medical Laboratory Technician 20.34 12160 - Medical Record Clerk 15.13 12190 - Medical Record Technician 18.45 12195 - Medical Transcriptionist 16.49 12210 - Nuclear Medicine Technologist 40.54 12221 - Nursing Assistant I 11.45 12222 - Nursing Assistant II 12.87 12223 - Nursing Assistant III 14.04 12224 - Nursing Assistant IV 15.77 12235 - Optical Dispenser 19.34 12236 - Optical Technician 16.49 12250 - Pharmacy Technician 15.99 12280 - Phlebotomist 15.72 12305 - Radiologic Technologist 24.26 12311 - Registered Nurse I 23.92 12312 - Registered Nurse II 29.26 12313 - Registered Nurse II Specialist 29.26 12314 - Registered Nurse III 35.40 12315 - Registered Nurse III Anesthetist 35.40 12316 - Registered Nurse IV 42.42 12317 - Scheduler (Drug and Alcohol Testing) 22.85 12320 - Substance Abuse Treatment Counselor 22.85 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.95 13012 - Exhibits Specialist II 27.20 13013 - Exhibits Specialist III 33.28 13041 - Illustrator I 22.74 13042 - Illustrator II 28.18 13043 - Illustrator III 34.47 13047 - Librarian 30.12 13050 - Library Aide/Clerk 15.00 13054 - Library Information Technology Systems 27.10 Administrator 13058 - Library Technician 16.04 13061 - Media Specialist I 19.62 13062 - Media Specialist II 21.95 13063 - Media Specialist III 24.84 13071 - Photographer I 16.41 13072 - Photographer II 19.36 13073 - Photographer III 22.75 13074 - Photographer IV 27.83 13075 - Photographer V 33.66 13090 - Technical Order Library Clerk 25.35 13110 - Video Teleconference Technician 18.85 14000 - Information Technology Occupations 14041 - Computer Operator I 13.44 14042 - Computer Operator II 15.03 14043 - Computer Operator III 16.96 14044 - Computer Operator IV 20.82 14045 - Computer Operator V 23.11 14071 - Computer Programmer I (see 1) 24.20 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.41 14160 - Personal Computer Support Technician 20.82 14170 - System Support Specialist 23.36 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 28.19 15020 - Aircrew Training Devices Instructor (Rated) 34.10 15030 - Air Crew Training Devices Instructor (Pilot) 39.64 15050 - Computer Based Training Specialist / Instructor 28.19 15060 - Educational Technologist 35.09 15070 - Flight Instructor (Pilot) 39.64 15080 - Graphic Artist 25.05 15085 - Maintenance Test Pilot Fixed Jet/Prop 39.64 15086 - Maintenance Test Pilot Rotary Wing 39.64 15088 - Non-Maintenance Test/Co-Pilot 39.64 15090 - Technical Instructor 24.84 15095 - Technical Instructor/Course Developer 30.38 15110 - Test Proctor 20.04 15120 - Tutor 20.04 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.71 16030 - Counter Attendant 9.71 16040 - Dry Cleaner 11.80 16070 - Finisher Flatwork Machine 9.71 16090 - Presser Hand 9.71 16110 - Presser Machine Drycleaning 9.71 16130 - Presser Machine Shirts 9.71 16160 - Presser Machine Wearing Apparel Laundry 9.71 16190 - Sewing Machine Operator 12.54 16220 - Tailor 13.29 16250 - Washer Machine 10.33 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 19.48 19040 - Tool And Die Maker 23.59 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 15.29 21030 - Material Coordinator 21.30 21040 - Material Expediter 21.30 21050 - Material Handling Laborer 12.93 21071 - Order Filler 12.09 21080 - Production Line Worker (Food Processing) 15.29 21110 - Shipping Packer 14.88 21130 - Shipping/Receiving Clerk 14.88 21140 - Store Worker I 12.97 21150 - Stock Clerk 17.59 21210 - Tools And Parts Attendant 15.29 21410 - Warehouse Specialist 15.29 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 25.15 23019 - Aircraft Logs and Records Technician 17.85 23021 - Aircraft Mechanic I 23.72 23022 - Aircraft Mechanic II 25.15 23023 - Aircraft Mechanic III 26.71 23040 - Aircraft Mechanic Helper 15.46 23050 - Aircraft Painter 20.64 23060 - Aircraft Servicer 17.85 23070 - Aircraft Survival Flight Equipment Technician 20.64 23080 - Aircraft Worker 19.25 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 19.25 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 23.72

II

23110 - Appliance Mechanic 19.48 23120 - Bicycle Repairer 15.87 23125 - Cable Splicer 23.45 23130 - Carpenter Maintenance 18.12 23140 - Carpet Layer 18.43 23160 - Electrician Maintenance 20.93 23181 - Electronics Technician Maintenance I 22.35 23182 - Electronics Technician Maintenance II 23.94 23183 - Electronics Technician Maintenance III 25.41 23260 - Fabric Worker 17.08 23290 - Fire Alarm System Mechanic 20.59 23310 - Fire Extinguisher Repairer 15.87 23311 - Fuel Distribution System Mechanic 23.13 23312 - Fuel Distribution System Operator 18.23 23370 - General Maintenance Worker 17.05 23380 - Ground Support Equipment Mechanic 23.72 23381 - Ground Support Equipment Servicer 17.85 23382 - Ground Support Equipment Worker 19.25 23391 - Gunsmith I 16.81 23392 - Gunsmith II 18.67 23393 - Gunsmith III 20.74 23410 - Heating Ventilation And Air-Conditioning 19.99 Mechanic 23411 - Heating Ventilation And Air Contidioning 20.50 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.31 23440 - Heavy Equipment Operator 20.02 23460 - Instrument Mechanic 24.25 23465 - Laboratory/Shelter Mechanic 19.48 23470 - Laborer 12.93 23510 - Locksmith 19.48 23530 - Machinery Maintenance Mechanic 24.17 23550 - Machinist Maintenance 20.59 23580 - Maintenance Trades Helper 14.85 23591 - Metrology Technician I 24.25 23592 - Metrology Technician II 25.81 23593 - Metrology Technician III 27.31 23640 - Millwright 22.23 23710 - Office Appliance Repairer 21.11 23760 - Painter Maintenance 17.49 23790 - Pipefitter Maintenance 25.51 23810 - Plumber Maintenance 23.97 23820 - Pneudraulic Systems Mechanic 20.59 23850 - Rigger 20.59 23870 - Scale Mechanic 18.43 23890 - Sheet-Metal Worker Maintenance 21.51 23910 - Small Engine Mechanic 18.36 23931 - Telecommunications Mechanic I 24.24 23932 - Telecommunications Mechanic II 25.46 23950 - Telephone Lineman 21.89 23960 - Welder Combination Maintenance 19.37 23965 - Well Driller 20.59 23970 - Woodcraft Worker 20.59 23980 - Woodworker 15.87 24000 - Personal Needs Occupations 24550 - Case Manager 14.20 24570 - Child Care Attendant 9.61 24580 - Child Care Center Clerk 13.34 24610 - Chore Aide 10.86 24620 - Family Readiness And Support Services 14.20 Coordinator 24630 - Homemaker 19.49 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 22.27 25040 - Sewage Plant Operator 22.26 25070 - Stationary Engineer 22.27 25190 - Ventilation Equipment Tender 15.47 25210 - Water Treatment Plant Operator 22.26 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.24 27007 - Baggage Inspector 13.99 27008 - Corrections Officer 16.48 27010 - Court Security Officer 15.87 27030 - Detection Dog Handler 15.92 27040 - Detention Officer 16.48 27070 - Firefighter 16.48 27101 - Guard I 13.99 27102 - Guard II 15.92 27131 - Police Officer I 19.84 27132 - Police Officer II 22.04 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.49 28042 - Carnival Equipment Repairer 13.15 28043 - Carnival Worker 9.34 28210 - Gate Attendant/Gate Tender 15.40 28310 - Lifeguard 13.66 28350 - Park Attendant (Aide) 17.23 28510 - Recreation Aide/Health Facility Attendant 12.25 28515 - Recreation Specialist 20.69 28630 - Sports Official 13.72 28690 - Swimming Pool Operator 16.36 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 18.99 29020 - Hatch Tender 18.99 29030 - Line Handler 18.99 29041 - Stevedore I 17.72 29042 - Stevedore II 22.13 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 39.89 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.50 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.29 30021 - Archeological Technician I 16.46 30022 - Archeological Technician II 18.41 30023 - Archeological Technician III 22.82 30030 - Cartographic Technician 22.82 30040 - Civil Engineering Technician 22.79 30051 - Cryogenic Technician I 25.27 30052 - Cryogenic Technician II 27.91 30061 - Drafter/CAD Operator I 16.46 30062 - Drafter/CAD Operator II 18.41 30063 - Drafter/CAD Operator III 20.54 30064 - Drafter/CAD Operator IV 25.27 30081 - Engineering Technician I 13.90 30082 - Engineering Technician II 16.57 30083 - Engineering Technician III 20.34 30084 - Engineering Technician IV 23.88 30085 - Engineering Technician V 29.16 30086 - Engineering Technician VI 35.34 30090 - Environmental Technician 22.79 30095 - Evidence Control Specialist 22.79 30210 - Laboratory Technician 20.56 30221 - Latent Fingerprint Technician I 25.27 30222 - Latent Fingerprint Technician II 27.91 30240 - Mathematical Technician 22.79 30361 - Paralegal/Legal Assistant I 19.06 30362 - Paralegal/Legal Assistant II 23.61 30363 - Paralegal/Legal Assistant III 28.89 30364 - Paralegal/Legal Assistant IV 34.95 30375 - Petroleum Supply Specialist 27.87 30390 - Photo-Optics Technician 22.82 30395 - Radiation Control Technician 27.87 30461 - Technical Writer I 22.79 30462 - Technical Writer II 27.87 30463 - Technical Writer III 33.75 30491 - Unexploded Ordnance (UXO) Technician I 25.35 30492 - Unexploded Ordnance (UXO) Technician II 30.67 30493 - Unexploded Ordnance (UXO) Technician III 36.76 30494 - Unexploded (UXO) Safety Escort 25.35 30495 - Unexploded (UXO) Sweep Personnel 25.35 30501 - Weather Forecaster I 25.27 30502 - Weather Forecaster II 30.74 30620 - Weather Observer Combined Upper Air Or (see 2) 20.54 Surface Programs 30621 - Weather Observer Senior (see 2) 22.82 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.67 31020 - Bus Aide 16.72 31030 - Bus Driver 21.99 31043 - Driver Courier 15.74 31260 - Parking and Lot Attendant 13.99 31290 - Shuttle Bus Driver 16.87 31310 - Taxi Driver 13.87 31361 - Truckdriver Light 16.87 31362 - Truckdriver Medium 18.17 31363 - Truckdriver Heavy 23.72 31364 - Truckdriver Tractor-Trailer 23.72 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.95 99030 - Cashier 9.93 99050 - Desk Clerk 10.20 99095 - Embalmer 25.35 99130 - Flight Follower 25.35 99251 - Laboratory Animal Caretaker I 15.81 99252 - Laboratory Animal Caretaker II 16.89 99260 - Marketing Analyst 27.44 99310 - Mortician 25.35 99410 - Pest Controller 18.72 99510 - Photofinishing Worker 13.91 99710 - Recycling Laborer 16.03 99711 - Recycling Specialist 19.47 99730 - Refuse Collector 14.51 99810 - Sales Clerk 12.62 99820 - School Crossing Guard 14.51 99830 - Survey Party Chief 21.55 99831 - Surveying Aide 12.21 99832 - Surveying Technician 16.73 99840 - Vending Machine Attendant 18.72 99841 - Vending Machine Repairer 23.56 99842 - Vending Machine Repairer Helper 18.72

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 8 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination.