The file's text, extracted by GovTribe without its formatting.
MILITARY SEALIFT COMMAND - NORFOLK
NORFOLK, VIRGINIA
S P E C I F I C A T I O N S
FOR
USNS CESAR CHAVEZ
(T-AKE 14)
USCG No.
CG1090369
ABS No.
YY216548
IMO No.
9593127
RFP NO. N32205-15-R-3004
ROH/DD AVAILABILITY
(14 SEPT 2015)
PRINCIPAL DIMENSIONS
LENGTH
689 ft (210 m)
BREADTH
105.6 ft (32.2 m)
FULL LOAD WL
30.5ft (9.3 m) ABL
GROSS TONNAGE...
43,758 Tons
MAXIMUM DISPLACEMENT
41,470 Long Tons (42,135 MT)
THIS SPECIFICATION CONSISTS OF THE FOLLOWING PAGES
INDEX
PAGES 3 THRU 6
LIST OF REFERENCES
PAGES 9 THRU 16
LIST OF GFM
PAGES 17 THRU 22
WORK ITEMS
PAGES 001-1 THRU 1004-4
THIS PAGE INTENTIONALLY LEFT BLANK
WORK ITEM INDEX
USNS CESAR CHAVEZ (T-AKE 14)
SECTION 000
GENERAL REQUIREMENTS
NOT SEPERATELY PRICED (NSP) REQUIREMENTS
Category
INTENT, SCOPE, GENERAL CONDITIONS AND DEFINITIONS
NSP
TECHNICAL AND MANUFACTURER’S REPRESENTATIVES
NSP
APPROACH, BERTH, AND MOORING REQUIREMENTS
NSP
TESTING AND QUALITY ASSURANCE
NSP
ELECTRICAL SAFETY PROCEDURE REQUIREMENTS
NSP
HEAVY WEATHER PLAN
NSP
COLD WEATHER PLAN
NSP
PHYSICAL SECURITY OF VESSEL
NSP
CATEGORY “A” WORK ITEMS
FURNISH OFFICE FOR OVERHAUL MANAGEMENT TEAM (OMT)
A
FURNISH GENERAL SERVICES
A
TELEPHONE SERVICES
A
PROJECT PLANNING AND PRODUCTION STATUS MONITORING REPORTS
A
PREPARATION OF WEIGHT AND MOMENT REPORT
A
INTEGRATED LOGISTICS AND GFM SUPPORT REQUIREMENTS
A
FIRE PROTECTION AND SHIP’S SAFETY PROGRAM
A
HANDLING SHIP’S STORES
A
DELIVERY AND REDELIVERY OF THE VESSEL
A
SHIPBOARD ACCESS AND SECURITY
A
GAS FREE CERTIFICATES
A
CLEAN AND GAS FREE TANKS, VOIDS, COFFERDAMS AND SPACES
A
DOCK TRIALS AND SEA TRIAL
A
HAZARDOUS WASTE DISPOSAL AT A CONTRACTOR’S FACILITY
A
CATEGORY “B” WORK ITEMS
PHYSICAL SECURITY AT PRIVATE CONTRACTORS FACILITY FP B-D
B
CONTINUATION OF SERVICES
B
SECTION 100
HULL STRUCTURE
CATEGORY “A” WORK ITEMS
T-ALT
Revision
STATION 3, 4, 5A, 6, 7A CONTAINMENT DRAIN MODS
12 FEB 15
ROLLER CURTAIN DOOR MODS
21 JAN 15
LOAD CENTER 9, 10, 11, & 12 SECURITY CAGES
23 JAN 14
ROLLER CHOCK REPLACEMENT
02 MAR 15
SOUNDING TUBE CORRECTIONS
N/A
02 MAR 15
STACK PRESERVATION
N/A
02 MAR 15
HULL PRESERVATION
N/A
17 MAR 15
EXHAUST PIPING PRESERVATION
N/A
02 MAR 15
SECTION 200
MACHINERY, PROPULSION
CATEGORY “A” WORK ITEMS
T-ALT
Revision
MDG AUTOMATION ANNUAL TESTING
N/A
23 JAN 15
VULKAN COUPLING ANNUAL INSPECTION
N/A
23 JAN 15
PROPULSION MOTOR AND COOLER CLEANING
N/A
23 JAN 15
MDG 1, 2, & 3 AND TURBOCHARGERS 12K HR OVERHAUL
N/A
20 APR 15
SECTION 300
ELECTRICAL
CATEGORY “A” WORK ITEMS
T-ALT
Revision
HV/SS/EMER SWITCHBOARD CLEANING
N/A
14 MAR 15
OP 4 STOREROOM LIGHTING
12 FEB 15
MOTOR CONTROL CENTER M05 ALT POWER SOURCE
19 FEB 15
CLEANING MAIN GENERATORS, FREQUENCY CONVERTERS,
PROPULSION TRANSFORMERS, AND HARMONIC FILTERS
N/A
21 MAR 15
M-711 LIGHT FIXTURE CONVERSION TO LED
23 FEB 15
SECTION 400
COMMUNICATION AND NAVIGATIONAL AIDS
CATEGORY “A” WORK ITEMS
T-ALT
Revision
COMMUNICATION SUITE PM AND REPAIRS
N/A
20 FEB 15
GMDSS ANNUAL RADIO SURVEY AND PM
N/A
20 FEB 15
RADAR PREVENTATIVE MAINTENANCE
N/A
20 FEB 15
GYRO SYSTEM PREVENTATIVE MAINTENANCE
N/A
20 FEB 15
VOYAGE DATA RECORDER ANNUAL CERTIFICATE
N/A
20 FEB 15
WHIP-DIPOPLE ANTENNA PM
N/A
17 MAR 15
OE-570 SATCOM ANTENNA SYSTEM PM
N/A
20 FEB 15
ECHO DEPTH SOUNDER PM
N/A
20 FEB 15
SRD-500 DOPPLER REPLACEMENT
17 MAR 15
ANTENNA RIGGING AERIAL PHOTOS
N/A
20 FEB 15
CARGO HOLD 4, 5, & 6 DIAL TELEPHONES
02 MAR 15
HF WHIP ANTENNA AND TILT PLATFORM REPLACEMENT
23 FEB 15
SECTION 500
MACHINERY, AUXILIARY SYSTEMS
CATEGORY “A” WORK ITEMS
T-ALT
Revision
EDG ANNUAL INSPECTION AND TESTING
N/A
17 MAR 15
APPLETON CRANE ANNUAL INSPECTION AND TESTING
N/A
23 JAN 15
OILY WATER SEPERATOR ANNUAL GROOM AND TESTING
N/A
23 JAN 15
AFFF PIPING REPLACEMENT
23 JAN 15
SEWAGE TREATMENT ROOM FIREMAIN FLUSHING VALVE REPLACE
12 FEB 15
MSD DISCHARGE PUMPS
23 JAN 15
SEWAGE DISCHARGE FLUSHING
12 FEB 15
VCHT CHECK VALVE INSTALLATION
12 FEB 15
NO. 1 DEWATERING PUMP REBUILD
N/A
27 MAR 15
CMWD PIPING REPLACEMENT (ZONE 1 ONLY)
03 MAR 15
LTFW COOLER SW PIPING MODS
12 FEB 15
LTFW COOLER ENDPLATE INSTALLATION
24 SEPT 14
FIREMAIN ISOLATION VALVE INSTALLATION
06 JAN 15
CARGO BRINE VALVE REPLACEMENT
24 SEPT 14
ANCHOR WINDLASS REPAIRS
N/A
02 MAR 15
FIRE FIGHTING ANNUAL INSPECTION AND TESTING
N/A
25 FEB 15
M2 MOTOR REWIND
N/A
27 MAR 15
SECTION 600
OUTFIT, FURNISHINGS and HABITABILITY
CATEGORY “A” WORK ITEMS
T-ALT
Revision
LIFEBOAT, RHIB, AND ACCOM LADDER ANNUALS
N/A
23 JAN 15
ACCOM LADDER OUTRIGGER UPGRADE
12 FEB 15
MASTER’S AND CHENG’S STATEROOM & DAYROOM DECK COVERING
N/A
26 MAR 15
CARGO HOLD 3 INSULATION MODIFICATION SUPPORT
N/A
26 JAN 15
STATEROOM DECK HEAD RENEWAL
N/A
20 FEB 15
GALLEY EQUIPMENT CALIBRATION
N/A
04 FEB 15
CARGO HOLD 6 CAGE AREA MODIFICATIONS
20 APR 15
CARGO HOLD 6 BIN AREA MODIFICATIONS
20 APR 15
SECTION 800
HEATING, VENTILATION and AIR CONDITIONING
CATEGORY “A” WORK ITEMS
T-ALT
Revision
GALLEY EXHAUST DUCT CLEANING
N/A
17 MAR 15
LAUNDRY EXHAUST DUCT CLEANING
N/A
17 MAR 15
IMECO CHILLER SHIPYARD SUPPORT
27 JAN 15
IMECO iHVAC & R SHIPYARD SUPPORT
23 APR 15
COSAL AC UNIT INSTALLATION
02 MAR 15
SECTION 900
DRY DOCKING
CATEGORY “A” WORK ITEMS
T-ALT
Revision
DRY DOCKING/ UNDOCKING VESSEL
N/A
17 MAR 15
PROPELLER SHAFT AND STERN TUBE INSPECTION
N/A
04 FEB 15
STERN TUBE SEAL INSPECTION
N/A
04 FEB 15
POLISH BOWTHRUSTER PROPELLER-INSPECT SEALS
N/A
04 FEB 15
REVERSE OSMOSIS UNIT SEACHEST INSTALLATION
17 MAR 15
CENTRAL SEAWATER 30 INCH WASTER PIECE MOD
04 FEB 15
PROPELLER SHAFT HORIZONTAL PROXIMITY PROBE INSTALLATION
04 FEB 15
STERN TUBE REFERENCE CELL INSTALLATION
04 FEB 15
909 UNDERWATER HULL CLEANING AND PAINTING
N/A
04 FEB 15
RENEW SEACHEST, ROPE GUARD AND BOWTHRUSTER ZINCS
N/A
04 FEB 15
INSPECT AND REPAIR CATHODIC PROTECTION
N/A
04 FEB 15
STERN TUBE BELZONA REPAIR
N/A
04 FEB 15
FIREMAIN OVERBOARD WASTER RENEWAL
N/A
04 FEB 15
FIREMAIN OVERBOARD PIPING RENEWAL
N/A
04 FEB 15
FIREMAIN ISOLATION VALVE REPLACEMENT
N/A
23 FEB 15
SECTION 1000
UNREP GEAR
CATEGORY “A” WORK ITEMS
T-ALT
Revision
1001 RENEW FLIGHT DECK NONSKID
N/A
28 JAN 15
HP AIR UNION REPLACEMENT
N/A
05 FEB 15
UNREP SERVICING AND REPAIR SUPPORT
N/A
12 FEB 15
UNREP RELIEF VALVE TESTING
N/A
20 APR 15
THIS PAGE INTENTIONALLY LEFT BLANK
REFERENCE INDEX
USNS CESAR CHAVEZ (T-AKE 14)
| 001 |
| 2.1 |
| MSC 803-7081122, Military Sealift Command General Technical Requirements (GTR's) |
| - |
| 003 |
| 2.1 |
| MIL. STD. MIL-C-28628D, of July 1991; Camels. |
| - |
| 2.2 |
| MIL. STD. MIL-F-29248, of 21 November 1986; Fenders, Marine, Foam Filled, Netless |
| - |
| 2.3 |
| MSC Drawing No. 802-7488866 Rev T, General Arrangement Plan |
| T |
| 2.4 |
| MSC Quality Management System Procedures Manual; EPI N0721-001.00-AQ – UNDER KEEL CLEARANCE |
| - |
| 004 |
| 2.1 |
| MIL-I-45208 (series), Inspection Systems |
| - |
| 005 |
| 2.1 |
| High Voltage Awareness Instruction Guide Powerpoint Presentation |
| 2.2 |
| High Voltage Awareness Powerpoint Presentation |
| 2.3 |
| MSC Safety Management System Procedure 2.1-004-ALL, Lock-out/Tag-out |
| 2.4 |
| MSC Safety Management System Procedure 2.1-016-AKE, High Voltage Systems |
| 2.5 |
| 29CFR 1910.335 Electrical Safety Related Work Practices; Safeguards for Personnel Protection |
| 2.6 |
| NFPA 70E Standard for Electrical Safety Requirements for Employee Workplaces |
| 006 |
| 2.1.1 |
| MSC Drawing No. 801-8390136, USNS CESAR CHAVEZ Trim and Stability Booklet |
| 007 |
| 2.1 |
| MSC Drawing No. 801-8390136, USNS CESAR CHAVEZ Trim and Stability Booklet |
| 011 |
| 2.1.1 |
| MSC Drawing No. 802-7488866 Rev T, General Arrangements |
| T |
| 2.1.2 |
| MSC Chemical Treatment Handbook |
| - |
| 015 |
| 2.1 |
| Department of Defense Security Manual for Safeguarding Classified Information, DOD Manual 5220.22-M |
| 016 |
| 2.1 |
| National Fire Protection Association 312, Standard for Fire Protection of Vessels During Construction, Repair and Lay-up |
| 2.2 |
| National Fire Protection Association 51B, Standard for Fire Prevention in Use of Cutting and Welding Processes |
| 018 |
| 2.1 |
| NAVMED P-5010-6, Manual of Naval Preventive Medicine, Chapter 6, Water Supply Afloat |
| 019 |
| 2.1 |
| COMSCINST 5530.3 Series, Military Sealift Command (MSC) Shipboard Force Protection (FP) Program |
| 2.2 |
| NAVSEA Standard Item 009-72, 9 May 2011 |
| 021 |
| 2.1.1 |
| NAVSEA Drawing 830-8390133, USNS CESAR CHAVEZ Capacity Plan |
| 2.1.2 |
| NAVSEA Drawing 801-8390136, USNS CESAR CHAVEZ Trim and Stability Booklet |
| 023 |
| 2.1.1 |
| Resource Conservation and Recovery Act (RCRA) as amended |
| 2.1.3 |
| Applicable Uniform Hazardous Waste Manifest Form |
| 2.1.4 |
| Test Methods for Evaluating Solid Waste, Physical/Chemical Methods; EPA Document, SW-846; the official compendium of analytical and sampling methods that have been evaluated and approved for use in complying with the RCRA regulations. |
| 024 |
| 2.1 |
| COMSCINST 5530.3 Series, Military Sealift Command (MSC) Shipboard Antiterrorism (AT) Program |
| 2.2 |
| NAVSEA Standard Item 009-72 “CURRENT REVSION”, Physical Security at Private Contractor’s Facility |
| 025 |
| 2.1 |
| COMSCINST 5530.3 Series, MILITARY SEALIFT COMMAND (MSC) SHIPBOARD FORCE PROTECTION (FP) PROGRAM |
| 2.2 |
| NAVSEA Standard Item 009-72, Physical Security at Private Contractor’s Facility - 29 July 2011 |
| 101 |
| 2.1 |
| NAVSEA Drawing 529-7489031 Rev. H; “Sludge Drainage and transfer System Diagram” SRD |
| H |
| 2.2 |
| NAVSEA Drawing 631-7488891 Rev J; “Paint Schedule” |
| J |
| 102 |
| 2.1 |
| Federal Equipment Co Drawing No. WD0300, Bottom Bar Weather Sealing Kit (Doors #14-15) |
| A |
| 2.2 |
| Federal Equipment Co Drawing No. WD0301, Bottom Bar Weather Sealing Kit (Doors #18-19) |
| - |
| 2.3 |
| MSC Drawing No. 803-7081122, Military Sealift Command General Technical Requirements |
| - |
| 103 |
| 2.1 |
| MSC Drawing No. T-AKE 1 800-8390003 Rev. -, HV Load Center 9-12 Security Cage Installation |
| - |
| 2.2 |
| ISM PROCEDURE 2.1-016 AKE REVISION 3.0, HIGH VOLTAGE (HV) SYSTEMS (to be provided by ship) |
| - |
| 2.3 |
| Point Eight DWG 2839 Sheet L12, T-AKE Power Substation |
| - |
| 104 |
| 2.1.1 |
| NAVSEA Drawing No. 582-7488941 Rev D, (NASSCO 471-331-4216), Mooring Arrangement And Detail Aft And Towing Package |
| D |
| 2.1.2 |
| Smith and Berger Marine Inc. Drawing No. B60526 Rev 4, General Arrangement Model 10 X 10 SS Chock |
| 4 |
| 2.1.3 |
| NAVSEA Drawing No. 103-8389961 Rev B, Replace Roller Chocks (ABS APPROVED) |
| B |
| 105 |
| 2.1 |
| MSC Drawing No. 800-8390043, “T-AKE Class Cargo Tank Sounding Tube Installation Standard Details” |
| - |
| 2.2 |
| MSC Drawing No. 802-7488866 Rev T, “General Arrangement” |
| T |
| 2.3 |
| MSC Drawing No. 631-7488891 Rev J, “Paint Schedule” |
| J |
| 2.4 |
| MSC Standard Drawing 803-7081122, Military Sealift Command General Technical Requirements (GTRs) |
| - |
| 106 |
| 2.1 |
| NAVSEA DWG 802-7488866 Rev T, “SRD: GENERAL ARRANGEMENT” |
| T |
| 2.2 |
| NAVSEA DWG 631-7488891 Rev J, “PAINT SCHEDULE” |
| J |
| 107 |
| 2.1 |
| NAVSEA DWG 802-7488866 Rev T, “SRD: GENERAL ARRANGEMENT” |
| T |
| 2.2 |
| NAVSEA DWG 631-7488891 Rev J, “PAINT SCHEDULE” |
| J |
| 108 |
| 2.1 |
| NAVSEA DWG 259-7488732 Rev C, “EXHAUST SYSTEMS - ENGINES & INCINERATOR DIAGRAM” |
| C |
| 2.2 |
| SSPC-SP 11, Power Tool Cleaning to Bare Metal |
| - |
| 2.3 |
| SSPC-PA 12, Measurement of Dry Coating Thickness with Magnetic Gages- |
| - |
| 2.4 |
| 3279_PDS_A1 PPG Amercoat 279 Product Data/Application Instructions |
| - |
| 201 |
| 2.1 |
| MSC Drawing: 079-8489239 Rev B – MCCS Periodic USCG Safety Test Procedure |
| B |
| 202 |
| 2.1 |
| Vulkan Coupling Drawing, DOKU1G531W00013E_4088324 |
| 2.2 |
| Tech Manual, Vulkan Coupling, Tech Doc DOKU1G531W0013E |
| 2.3 |
| Tech Manual T9233-CF-1MC-070/020, Technical Manual, Diesel Engines, Main Power Generation, Model 9L 48/60 and 8L 48/60, Volume E1-E4 for Main Diesels. |
| 2.4 |
| T-AKE Class Notice #15 – MDG Couplings |
| 203 |
| 2.1 |
| T/M T9235-AG-MMC-010, Propulsion Motor, Synchronous, Motor Design M3HSX 305-126/16 |
| - |
| 204 |
| 2.1 |
| T/M T9233-CF-IMC-010; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume B1, Engine Operating Instructions |
| - |
| 2.2 |
| T/M T9233-CF-IMC-020; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume B2, Engine Working Instructions |
| - |
| 2.3 |
| T/M T9233-CF-IMC-040; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume B3, Spare Parts |
| - |
| 2.4 |
| T/M T9233-CF-IMC-070; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volume E1-E4, Engine Operating Instructions |
| - |
| 2.5 |
| T/M T9233-CF-IMC-030; Diesel Engines, Main Power Generation, Models 9L 48/60 and 8L 48/60, Volumes C1, C2, C3, Turbocharger Operating and Working Instructions/Spare Parts Catalog |
| - |
| 301 |
| 2.1 |
| NAVSEA T/M T9235-AL-MCC-010, Main Power Switchboard, 6.6 KV, 2500A |
| - |
| 2.2 |
| NAVSEA T/M T9324-BU-MMC-010, Switchboards Ships Service 480V |
| - |
| 2.3 |
| NAVSEA T/M T9324-BT-MMC-010, Emergency Switchboard 480V Dwg 2838 For TAKE |
| - |
| 2.4 |
| Cutler Hammer, I.B. 32-255-1G, Instructions for Installation, Operation and Maintenance of Type VCP-W Vacuum Circuit Breakers |
| - |
| 2.5 |
| Cutler Hammer, I.B. 48002, Instructions for 36" Wide Vacuum-Break Starters Rated 360 Amperes, 7200 Volts, Roll Out Type |
| - |
| 302 |
| 2.1 |
| MSC Drawing 331-7488807, SRD: LIGHTING SYSTEM BWD, ACCOMMODATIONS 01 AND 02 LEVELS |
| L |
| 2.2 |
| MSC Drawing 331-7488808, SRD: BWD, MACHINERY SPACE LIGHTING |
| H |
| 2.3 |
| MSC Drawing 331-7488809, SRD: BWD, CARGO AND MISCELLANEOUS SPACES LIGHTING |
| 2.4 |
| PC 1 - RIG-A-LITE Product Sheet SAFJ Series LED Fixtures and Certificates (9) Sheets, SAFJ06-1LMS Hazardous LED Fixture, 45Watt 120-277VAC, 5000k, Clear lens |
| 303 |
| 2.1 |
| MSC Drawing No. 320-8393000, Lewis & Clark Class Motor Control Center M05 MTS Installation. |
| - |
| 304 |
| 2.1 |
| T9235-AK-MMC-010- Generator, Synchronous, 6600 V, 60 HZ, including |
| - |
| 2.2 |
| Generator Excitation Control Panel |
| - |
| 2.3 |
| T9235-AN-MMC-010 – Propulsion Control System |
| - |
| 2.4 |
| T9235-AM-MMC-010 - Transformers, Propulsion, Type THT 12 HN 7M2/N |
| - |
| 305 |
| 2.1 |
| MSC Drawing 331-7488807 Rev L, “SRD: Lighting System BWD 01 and 02 Level” |
| L |
| 2.2 |
| MSC Drawing 331-7488808 Rev G, “SRD: Lighting System BWD Machinery Space” |
| H |
| 2.3 |
| MSC Drawing 331-7488809 Rev M, “SRD: Lighting System BWD Cargo and Miscellaneous Spaces” |
| M |
| 2.4 |
| MSC Drawing 331-7489146 Rev J, “SRD: Lighting System BWD 03 and 04 Levels” |
| J |
| 2.5 |
| MSC Drawing 331-7489147 Rev F, “SRD: Lighting System BWD 05 and 06 Levels” |
| F |
| 2.6 |
| MSC Drawing 331-7489150 Rev G, “SRD: Lighting System BWD 07 and 08 Levels” |
| G |
| 2.7 |
| TAKE-Notice 12-Rev1-Caution of 120V LC Doane Lights 06Feb14 |
| - |
| 2.8 |
| SeeSmart G2 HP 2 Foot 8W NWM SEP LED Tube Light Spec Sheet |
| - |
| 2.9 |
| SeeSmart G2 HP 4 Foot 15W NWM SEP Rotating LED Tube Light Spec Sheet |
| - |
| 2.10 |
| Rotatable Sep Led Tube Lamp Installation Information and Instructions |
| - |
| 401 |
| 2.1 |
| AN/USQ-155 Manufacturer’s Technical Manual |
| 2.2 |
| SAMMS Planned Maintenance Task Code 3435-E621 |
| 2.3 |
| US Navy Preventative Maintenance System: |
| 2.3.1 |
| MIP 4416/510_2W-1/M |
| 2.3.3 |
| MIP 4411/019 MRCS R-1 and Q-1 |
| 402 |
| 2.1 |
| SOLAS Chapter 1, Regulation 9, Survey of Radio Installations of Cargo Ships |
| 403 |
| 2.1 |
| SPERRY VISIONMASTER SERIES 10CM RADAR SERVICE MANUAL (SPERRY Manuals are proprietary information and will only be made available to OEM Manufacturers REPS) |
| 2.2 |
| SPERRY MARINE VISIONMASTER SERIES 3CM RADAR SERVICE MANUAL (SPERRY Manuals are proprietary information and will only be made available to OEM Manufacturers REPS) |
| 404 |
| 2.1 |
| Sperry Marine MK-27F SERVICE MANUAL. (SPERRY Manuals are proprietary information and will only be made available to OEM Manufacturers REPS) |
| 405 |
| 2.1 |
| TM TE03-AD-MMC-010; Voyage Data Recorder VDR Model JA IT6-8033 Operation and Maintenance |
| 406 |
| 2.1 |
| Lewis and Clark Antenna Legend sheet Dated 17 SEP 2009 |
| 2.2 |
| Whip antenna maintenance PMS 4411/023, U10 |
| 2.3 |
| Dipole antenna maintenance PMS |
| 407 |
| 2.1 |
| Trivec Avant Technical Manual TMIN EE 134-AT-OMP-010 |
| 408 |
| 2.1 |
| TE 360-AV-MMC-010 / 0910-LP-104-3397 Installation Technical Manuals |
| 409 |
| 2.1 |
| Furuno DS-60 Doppler Speed Log Service Manual |
| 2.2 |
| DS-661 Gate valve and DS-631 Transducer installation instruction |
| 2.3 |
| Sperry SRD-500 DSL service manual (Proprietary) |
| 2.4 |
| DS-60 AS-Built installation drawing for USNS Wally Schirra |
| 410 |
| 2.1 |
| NAVSEA ANTENNA RIGGING PHOTO GUIDANCE |
| 2.2 |
| T-AKE CLASS SHIP ANTENNA LEGEND |
| 412 |
| 2.1 |
| NAVSEA DWG 432-7488812, BWD, Interior Communication System (NASSCO 471-346-0201) |
| N |
| 2.2 |
| NAVSEA DWG 085-8390149, DIAL TELEPHONE DIRECTORY |
| - |
| 413 |
| 2.1 |
| AB-1298 Foundation Replacement Sketch |
| 2.2 |
| SKSP 6390 Antenna Specifications |
| 2.3 |
| 409R Installation Mounting Kit Sheet |
| 2.4 |
| NAVSEA Dwg 802-7488866, General Ship Arrangement |
| 501 |
| 2.1 |
| T9312-AY-IMC-010, Vol 1, CAT EDG Operations/Maintenance Manual |
| 502 |
| 2.1 |
| Tech Manual TG811-BL-MMC-010 (Copy aboard the ship) |
| 2.2 |
| Appleton ABS – Turntable Bearing Tilt Test Procedure – Log Book |
| 503 |
| 2.1 |
| NAVSEA Tech Manual T9550-AX-MMC-010 Oily Water Separator, Ultra-Sep Model 5000 |
| 504 |
| 2.1 |
| NAVSEA Dwg 555-7488760 Rev B, SRD Foam Firefighting System Diagram |
| B |
| 2.2 |
| MSC Dwg 800-8390862 Rev A, Aft AFFF Piping Replacement |
| A |
| 2.3 |
| MSC Dwg 8393925 Rev -, Aft AFFF Piping Replacement, CHAVEZ AS-BUILT |
| - |
| 2.4 |
| MSC General Technical Requirements (GTR) Dwg 803-7081122 |
| - |
| 2.5 |
| MSFSC SMS Procedure 2.1-004-all, Tagout/Lockout |
| - |
| 2.6 |
| NAVSEA Drawing No. 505-7488748 T-AKE 1 Class Flushing Procedures |
| - |
| 506 |
| 2.1 |
| NAVSEA Dwg. No. 521-7488717, Rev J; Firemain System Diagram – SRD |
| J |
| 2.2 |
| NAVSEA Dwg. No. 528-7488743, Rev M; Vacuum Sewage & Plumbing Drains System Diagram – SRD |
| M |
| 2.3 |
| NAVSEA Dwg. No. 631-7488891, Rev. J; Paint Schedule |
| J |
| 507 |
| 2.1 |
| MSC Drawing No. 528-8389770 Rev E, “MSD Discharge Pump Modification”. |
| E |
| 2.2 |
| NAVSEA Drawing No. 528-7488743 REV L “Vacuum Sewage and Plumbing Drains System Diagram” |
| M |
| 2.3 |
| Technical Manual T9593-AC-MMC-01B “Marine Sanitation Device and Vacuum Collection, Holding and Transfer System” for T-AKE. Located onboard ship |
| 2.4 |
| Eddy Pump Drawing 07T-AKE-S9 “Line Diagram Duel Epcon Pump Layout” |
| 2.5 |
| Eddy Pump Drawing 07T-AKE-S1 “Dual Epcon II” |
| 2.6 |
| Eddy Pump Drawing 07T-AKE-S8 “Epcon Duplex Typical Connection Diagram” |
| 508 |
| 2.1 |
| MSC Drawing No. 528-8391543, “Sewage Discharge Riser Flushing Modification” |
| 2.2 |
| NAVSEA Drawing No. 528-7488743, “Vacuum Sewage Plumbing Drain System” - SRD |
| M |
| 509 |
| 2.1.1 |
| NAVSEA Drawing No. 528-8499093 Rev. -; SRD Vacuum Sewage & Plumbing Drains System Diagram |
| 510 |
| 2.1 |
| TM T6225-MY-MMC-01B, PUMPS, CENTRIFUGAL, TYPE VHSS, SIZE 10", Dewatering/Ballast Pump |
| - |
| 2.2 |
| Military Sealift Standard Work Item #55, REVISED 2 APRIL 1993, REWIND MOTORS AC SERVICE |
| - |
| 512 |
| 2.1 |
| MSC Standard Item No. 043, revised 02 April 1993, “Cleaning and Gas Freeing Tanks and Spaces” |
| - |
| 2.2 |
| COMSCINST 4750.2C, Preservation Instruction for MSC Ships |
| - |
| 2.3 |
| NAVSEA Drawing 523-7488761 Revision C {NASSCO drawing No. 471-342-7155}, Counter Measure Wash Down System |
| C |
| 2.4 |
| NAVSEA DWG 802-7488866 Rev T, “SRD: GENERAL ARRANGEMENT” |
| T |
| 514 |
| 2.1.1 |
| NAVSEA DWG No. 256-7488724 Rev G, NASSCO 471-342-7109, - Central Seawater Cooling System Diagram |
| G |
| 2.1.2 |
| Central Seawater Cooling System Mod DWG 256-8390463, Rev D |
| D |
| 515 |
| 2.1.1 |
| NAVSEA DWG No. 256-7488724 Rev G, (NASSCO Dwg 471-342-7109), Central Seawater Cooling System Diagram |
| G |
| 2.1.2 |
| NAVSEA Dwg No. 532-7488722 Rev F (NASSCO Dwg 471-342-7107, Low Temperature Freshwater Cooling System Diagram |
| F |
| 2.1.3 |
| Tech Manual T9532-AZ-MMC-010, Heat Exchangers, Plate/Frame Type Central Low Temp Fresh Water |
| - |
| 516 |
| 2.1.1 |
| NAVSEA Drawing No. 521-7488717 Rev H, Firemain System Diagram |
| H |
| 2.1.2 |
| NAVSEA Drawing No. 802-7488866 Rev T, General Arrangement |
| T |
| 2.1.3 |
| NAVSEA Drawing No. 635-7489072 Rev B, Insulation Schedule Pipe and Vent |
| B |
| 517 |
| 2.1 |
| NAVSEA Dwg No. 516-7488756, Cargo Refrigeration Secondary Coolant Circulation System Diagram |
| F |
| 2.2 |
| ACRIS Butterfly Valve Cut Sheets |
| N/A |
| 518 |
| 2.1 |
| Technical Manual TG813-BV-MMC-01, ELECTRICALLY DRIVEN DECK MACHINERY MODELS 03-136-184/0, 03-136-185/0, 03-136-186/0 AND 03-136-187/0 (Including Through Rev D) |
| 2.2 |
| TTS Kocks Dwg 03-138.007/0A – Drum Shaft – MARKED UP COPY |
| 2.3 |
| MSC Standard Drawing 803-7081122, Military Sealift Command General Technical Requirements (GTRs) |
| 2.4 |
| MSC SMS Procedure 2.1-004-All, Tagout/Lockout |
| 519 |
| 2.1 |
| 801-8390134 Rev -, T-AKE 14 Fire Control Plan |
| - |
| 2.2 |
| MSC Dwg 555-7488760 Rev B, SRD Foam Firefighting System Diagram |
| B |
| 520 |
| 2.1 |
| T9513-AE-MMC-010 - HVAC VENTILATION FANS & DAMPERS |
| - |
| 601 |
| 2.1 |
| Tech Manual TS800-AH-MMC-010; LIFEBOAT, TOTALLY ENCLOSED, SELF RIGHTING, FASSMER TYPE CL/CLR/GMR, OPERATOR'S HANDBOOK |
| - |
| 2.2 |
| Tech Manual T9583-A9-MMC-010; DAVIT, LIFEBOAT, GRAVITY PIVOT MDL GSP.FP.150/6.25 WITH WINCH MDL W26L.2 |
| - |
| 2.3 |
| Tech Manual TS800-AE-MMC-020; LIFEBOAT DIESEL ENGINE, SAAB TYPE L3.139 LB |
| - |
| 2.4 |
| Checklist for FASSMER Duplex Release Gear Annually |
| - |
| 2.5 |
| Checklist for FASSMER Lifeboats Annually |
| - |
| 2.6 |
| Tech Manual T9583-A8-MMC-010; BOAT, RESCUE W/ DAVIT & WINCHES; OPERATION & MAINTENANCE INSTRUCTIONS |
| - |
| 2.7 |
| Tech Manual T9583-BB-MMC-010; BOAT, RESCUE, DIESEL ENGINE, STEYR MODEL MO236K42 (SERIAL NO'S 68227001 & ABOVE); INSTALLATION, OPERATION & MAINTENANCE |
| - |
| 2.8 |
| Checklist for FASSMER Fast Rescue Boats Annually |
| - |
| 2.9 |
| Fiberglass and Gel coat Inspection Document Checklist for Annual Accommodation Ladder Inspection |
| - |
| 2.10 |
| Tech Manual T9623-AP-MMC-010; LADDER, ACCOMMODATION, MDL 13.16M |
| - |
| 2.11 |
| FASSMER Service Bulletin on Gangways and Accommodation Ladders |
| - |
| 602 |
| 2.1 |
| MSC DWG# 600-8392567 (FASSMER DWG# 12.1566-279.00.00.0), Outrigger, Foldable |
| - |
| 2.2 |
| MSC DWG# 600-8392830 (FASSMER DWG# 12.1566-279.01.00.0), Outrigger Bracket, Screwable |
| - |
| 2.3 |
| MSC DWG# 600-8392831 (FASSMER DWG# 12.1566-279.02.00.0), Outrigger/Spreader Bar |
| - |
| 2.4 |
| MSC DWG# 600-8392832 (FASSMER DWG# 12.1566-279.03.00.0), Counterplate |
| - |
| 2.5 |
| MSC DWG# 600-8392833 (FASSMER DWG# 12.1566-279.04.00.0), Outrigger Adapter |
| - |
| 2.6 |
| MSC DWG# 600-8392834 (FASSMER DWG# 12.1566-279.00.99.0), Accommodation Ladder Retrofit w/ Outriggers & Safety Net |
| - |
| 2.7 |
| MSC.1/Circ.1331 (11 June 2009), Guidelines for Construction, Installation, Maintenance and Inspection/Survey of Means of Embarkation and Disembarkation |
| - |
| 603 |
| 2.1 |
| Whilst Amtico International “STRATICA Technical Manual – Specification, Installation, Care and Maintenance” |
| - |
| 606 |
| 2.1 |
| Various Tech Manuals. All are available onboard |
| N/A |
| 607 |
| 2.1 |
| MSC Drawing No. 651-8392584, Second Deck Cargo Hold No. 6 Stowage Cage Area Modifications |
| - |
| 2.2 |
| MSC Drawing No. 802-7488866, Selected Record Drawing, General Arrangement |
| T |
| 2.3 |
| NAVSEA Dwg. 631-7488891 Rev. J; Paint Schedule |
| J |
| 2.4 |
| NAVSEA Dwg. 631-7489177 Rev. B; Non-skid Arrangement |
| B |
| 608 |
| 2.1 |
| MSC Drawing No. 651-8392583, Second Deck Cargo Hold No. 6 Bulk Stowage and Cabinet Space Modifications |
| - |
| 2.2 |
| MSC Drawing No. 802-7488866, Selected Record Drawing, General Arrangement |
| T |
| 2.3 |
| NAVSEA Dwg. 631-7488891 Rev. J; Paint Schedule |
| J |
| 801 |
| 2.1.1 |
| MSCLANT Standard Item No. 14, “Cleaning Galley Range Exhaust Ducts” (Revised 2 April 1993). |
| - |
| 2.1.2 |
| NAVSEA Drawing 512-7488750, Rev J; HVAC Diagram Accommodation Spaces (Sheets 1, 12 and 17 only) |
| J |
| 802 |
| 2.1 |
| MSCLANT Standard Item No. 15, “Cleaning Ventilation Systems” (Revised 2 April 1993) |
| - |
| 2.2 |
| MSCLANT Standard Item No. 16, “Cleaning Ventilation Filter Screens” (Revised 2 April 1993) |
| - |
| 2.3 |
| NAVSEA Drawing 512-7488750, Rev J; HVAC Diagram Accommodation Spaces |
| J |
| 803 |
| 2.1.1 |
| Dwg. No. 8393719rC: IHVACR Upgrade T-AKE Class 10-14 |
| - |
| 2.1.2 |
| Dwg. No. 897-000293r-: T-AKE 14 Installation Plan Details |
| - |
| 2.1.3 |
| Example Rigging Booklet for T-AKE 14.pdf |
| - |
| 2.1.4 |
| T-AKE Installation Process Booklet.pdf |
| - |
| 804 |
| 2.1.1 |
| Dwg. No. 8393719rC: IHVACR Upgrade T-AKE Class 10-14 |
| - |
| 2.1.2 |
| Dwg. No. 897-000293r-: T-AKE 14 Installation Plan Details |
| - |
| 2.1.3 |
| 31108 M1M2 Guards Example rA |
| - |
| 2.1.4 |
| 31108 M4M5 Catwalk Example rA |
| - |
| 2.1.5 |
| 31108 Mounting Bracket 2xVSD Distributed System Example rC |
| - |
| 2.1.6 |
| T-AKE 1 Installation Process Booklet 1 |
| - |
| 2.1.7 |
| Ceiling opening drawing |
| - |
| 805 |
| 2.1.1 |
| MSC Dwg 514-8390392 T-AKE 13 REDLINE, COSAL Storeroom Fan Coil Installation |
| - |
| 2.1.2 |
| MSC Dwg 514-7488755, AC Chilled Water System Diagram |
| J |
| 2.1.3 |
| MSC Dwg 526-7488716, Weather Deck and Miscellaneous Drains System Diagram |
| D |
| 2.1.4 |
| NAVSEA Dwg 320-8193632, Electrical Online Diagram, SRD |
| F |
| 2.1.5 |
| Carrier Fan Coil Product Data Model 42CG |
| - |
| 2.1.6 |
| Carrier Installation, Start Up and Service Data, Model 42CG |
| - |
| 901 |
| 2.1.1 |
| MSC Drawing No. 801-8390136 Rev -, USNS CESAR CHAVEZ Trim and Stability Booklet |
| 2.1.2 |
| MSC Drawing No. 801-7488890 Rev G, Docking Plan |
| 2.1.3 |
| MSC Drawing No. 830-8390133 Rev -, USNS CESAR CHAVEZ Capacity Plan |
| 2.1.4 |
| Safety Certification Program for Dry-docking Facilities and Shipbuilding Ways for U.S. Navy Ships, MIL-STD 1625C (SH) |
| 2.1.5 |
| COMSCINST 9997.1A, Dry dock Standards for MSC Ship Availabilities |
| 902 |
| 2.1.1 |
| NAVSEA Dwg 243-7488962 Rev G, Shaft Arrangement |
| G |
| 2.1.2 |
| T/M T9243-BA-MMC-010 Fixed Pitch Propeller and Shafting with Bearings Model DAAK012887 |
| 2.1.3 |
| T/M T9561-BR-MMC-010 Steering Gear Rotary Vane, Model # RV 2150-3, and Shorthorn Rudder |
| 2.1.4 |
| Wartsila Dwg W084837233 Rev E, Assy Stern tube |
| E |
| 2.1.5 |
| Bot Groningen Dwg 1.1262/1/1 A1, Rudder Project Arrangement |
| 2.1.6 |
| Bot Groningen Dwg 3.1265/1.1 A3, Rudder Trunk Summary |
| 2.1.7 |
| Bot Groningen Dwg 2.1263/1.1 A3, Rudder Cone Coupling |
| 2.1.8 |
| Bot Groningen Dwg 2.1264/1.1 A3, Rudder Hydraulic Nut Summary |
| 2.1.9 |
| Wartsila Dwg W084827066, Assy Propeller Cap |
| 2.1.10 |
| Wartsila Dwg W084836779, Propeller Boss |
| 2.1.11 |
| Wartsila Dwg W084838596, Assy Propeller Hydraulic Nut |
| 2.1.12 |
| NASSCO Dwg 471-351-4984, Rope Guard Installation |
| 2.1.13 |
| Wartsila Dwg W084837232, Arrangement Shafting |
| 2.1.14 |
| Wartsila Dwg W007420313, Round Nut Locking |
| 2.1.15 |
| Wartsila Dwg 9AK30410AS3, Shaft Flange-9FC6-58 AS3 |
| 903 |
| 2.1 |
| T/M T9243-AX-MMC-010, SHAFT SEAL, STERN TUBE, TYPE MD FOR USNS LEWIS AND CLARK (T-AKE 1) CLASS, INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS. |
| - |
| 2.2 |
| WARTSILA LIPS Drawing H74985-01 Rev(C), GA of 750 MOD 712 Type MD Seal, provided in Reference 2.1 |
| C |
| 904 |
| 2.1 |
| T/M T9568-A2-MMC-01A, Bow Thruster Installation Manual, Type TT2200 |
| - |
| 905 |
| 2.1 |
| MSC Drawing 520-8391615, Rev C, Guidance Drawing, T-AKE 1 Class, Reverse Osmosis System Sea Suction Installation |
| C |
| 2.2 |
| MSC Drawing 803-8392963, Rev A, Standard Drawing, Galvanic Protection Sleeve |
| A |
| 2.3 |
| MSC Drawing 520-8393817, Rev -, Guidance Drawing, T-AKE 1 Class, Reverse Osmosis System Feed Water From Firemain Removal |
| - |
| 2.4 |
| MSC Drawing 531-8392962, Rev -, Guidance Drawing, T-AKE 1 Class, Reverse Osmosis System Piping Modifications and Installations |
| - |
| 2.5 |
| MSC Drawing 521-7488717 Rev J, Selected Record Drawing, USNS CESAR CHAVEZ, Firemain System Diagram |
| J |
| 2.6 |
| MSC Drawing 531-7488738 Rev H, Selected Record Drawing, USNS CESAR CHAVEZ, Distilling Plant System Diagram |
| H |
| 2.7 |
| MSC Drawing 256-7488735 Rev F, Selected Record Drawing, USNS CESAR CHAVEZ, Auxiliary Seawater Services System Diagram |
| F |
| 2.8 |
| MSC Standard Drawing 803-7081122, Military Sealift Command General Technical Requirements (GTRs) |
| - |
| 2.9 |
| MSFSC SMS Procedure 2.1-004-All, Tagout/Lockout |
| - |
| 2.10 |
| ASTM Standard F1166, Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities |
| - |
| 2.11 |
| NAVSEA Drawing No. 505-7488748 T-AKE 1 Class Flushing Procedures |
| - |
| 2.12 |
| MSC Drawing 631-7488891 Rev J, Paint Schedule |
| J |
| 906 |
| 2.1 |
| MSC Dwg 256-7488724 Rev F (NASSCO 471-342-7109), Central Seawater Cooling System Diagram |
| F |
| 2.2 |
| MSC DWG 256-8390559, Rev A, Central Seawater 30 Inch Waster Piece Mod |
| A |
| 907 |
| 2.1.1 |
| NAVSEA Drawing No. 243-7488962 Rev. G, “Dry Cargo/Ammunition Ship, T-AKE 1 Class, Shaft Arrangement” |
| G |
| 2.1.2 |
| Riverhawk Company, Drawing No. 34664 Rev. B, “Integrated D Probe IPS34664” |
| B |
| 2.1.3 |
| Riverhawk Company, Drawing No. 34940 Rev.-, “Indiprox Module IPM34940” |
| - |
| 2.1.4 |
| “Data Recorder and Display Information for the Reference Cells and Wear Down Indicator”, (PDF) |
| - |
| 2.1.5 |
| Maritech, LLC, 1071-6111-110R, “Field Installation Instruction, Transmit Power Supply for the DIN Standard [144 mm x 144 mm] Data Recorder” |
| - |
| 908 |
| 2.1 |
| MSC Drawing No. 120-8391507 Rev A T-AKE Class Stern Tube Reference Cell Structural Diagram. |
| - |
| 2.2 |
| MSC Drawing No. 320-8391860 Rev - T-AKE Class Stern Tube Reference Cell Installation Diagram, T-AKE 13 REDLINE |
| - |
| 909 |
| 2.1 |
| MSC Standard Item 90, Underwater Hull Recoat 5 Year Ablative |
| - |
| 2.2 |
| NAVSEA Dwg. 603-7488868, Paint Lines and Draft Marks |
| E |
| 2.3 |
| Surface Preparation Standard SSPC-SP-12/NACE 5, Surface Preparation and cleaning of Metals by Water Jetting Prior to Coating |
| - |
| 2.4 |
| PPG-PMC MSC Handbook |
| - |
| 911 |
| 2.1 |
| T/M T9633-AS-MMC-010, Cathodic Protection System Impressed Current |
| 913 |
| 2.1 |
| MSC Drawing No. 521-7488738 Rev H, Firemain System Diagram |
| 2.2 |
| NASSCO Drawing No. 73-87-441 |
| D |
| 914 |
| 2.1 |
| NAVSEA Dwg. No. 521-7488717, Rev. H; Firemain System Diagram – SRD |
| H |
| 915 |
| 2.1 |
| NAVSEA Dwg 521-7488717 Rev J, “SRD: Firemain System Diagram” |
| J |
| 1001 |
| 2.1 |
| Naval Ships’ Technical Manual (NSTM) Chapter 634 (“Deck Coverings”) |
| 2.2 |
| Naval Air Warfare Center, Visual Landing Aids Installation TAK(E) Class Ships – 627928 |
| 2.3 |
| Surface Preparation Standard No. 10 (SSPC-SP-10) of the steel structures painting council manual |
| 2.4 |
| Surface Preparation Standard SSPC-SP11, Power Tool Cleaning To Bare Metal |
| 2.5 |
| Air Capable Ship Aviation Facilities Bulletin No. 1K |
| 2.6 |
| Surface Preparation Standard, SSPC-SP-12/NACE 5, Surface Preparation and Cleaning of Metals by Water jetting Prior to Recoating |
| 2.7 |
| NAVSEA Dwg 588-7488997 (H), Aviation Support Facilities |
| 1002 |
| 2.1 |
| NAVSEA 551-7488862, Rev G, Selected Record Drawing, T-AKE Class, High Pressure Air System Diagram |
| H |
| 2.2 |
| NAVSEA TRIP REPORT, “USNS CESAR CHAVEZ (T-AKE 14) HIGH PRESSURE (HP) AIR SYSTEM UNION NUT MATERIAL EVALUATION”, dtd 28 Aug 2014 |
| 2.3 |
| MSC Standard Drawing 803-7081122, Military Sealift Command General Technical Requirements (GTRs) |
| 2.4 |
| MSC SMS Procedure 2.1-004-All, Tagout/Lockout |
| 2.5 |
| NAVSEA Drawing No. 505-7488748 T-AKE 1 Class Flushing Procedures |
| 2.6 |
| MSC Drawing 631-7488891 Rev J, T-AKE Class, Paint Schedule |
| J |
GOVERNMENT FURNISHED MATERIAL (GFM) LISTING
USNS CESAR CHAVEZ (T-AKE 14)
| Work Item |
| GFM-Nomenclature |
| Qty |
| 102 |
| Roller Curtain Door Mod Kit - Federal Equipment WD300 Rev A |
| 2 |
| Roller Curtain Door Mod Kit - Federal Equipment WD301 |
| 2 |
| 104 |
| Smith Berger Marine, Inc. model 10X10 SS Chock, |
| 10 |
| Paint in accordance with MSC PPG Paint contract |
| AR |
| 204 |
| 12k Overhaul/Maintenance Kit 8Cyl; P/N: M12701657 |
| 1 |
| 12K Overhaul/Maintenance Kit 9Cyl; P/N: M12701660 |
| 2 |
| 303 |
| Eaton Manual Transfer Switch, Model No. NTCEC3X30200XRU |
| 1 |
| 413 |
| Shakespeare Phase III 6390 side fed whip antennas |
| 4 |
| Shakespeare 409R mounting support kit |
| 4 |
| 502 |
| Hydraulic Torque Multiplier |
| 1 |
| 504 |
| CAP, 1-1/2'', THREADED |
| 36 |
| TUBE, SEAMLESS, CL200, 1 1/2' |
| 170 |
| TUBE, SEAMLESS, CL200, 6'' |
| 260 |
| TUBE, SEAMLESS, CL200, 10'' |
| 20 |
| COUPLING, REDUCING, 3'' X 2 1/2'', SB |
| 2 |
| 30 DEG. DECK EDGE NOZZLE, MODEL NO. NF30030 |
| 8 |
| STRAIGHT DECK NOZZLE, MODEL NO. NF30000 |
| 10 |
| COUPLING, REDUCING, 2'' X 1 1/2'', SB |
| 2 |
| FEMALE ADAPTER FPT X MALE, 1 1/2'', SB |
| 4 |
| ELL, 90 DEG., SHORT RADIUS, 400#, 1/2'', SW |
| 40 |
| PIPE, SEAMLESS, SCH80, 3/4'' |
| 50 |
| DECK SLEEVE PENETRATION, 3/4'' |
| 22 |
| DECK SLEEVE PENETRATION, 3'' |
| 9 |
| DECK SLEEVE PENETRATION, 4'' |
| 10 |
| REDUCER, CONCENTRIC, 4'' X 3'', CL 200, BW |
| 7 |
| EA ELL, 90 DEG., LONG RAD, CL200, 2 1/2'', BW |
| 10 |
| EA ELL, 90 DEG., LONG RADIUS, CL200, 3'', BW |
| 20 |
| EA ELL, 90 DEG., LONG RADIUS, CL200, 6'', BW |
| 19 |
| EA ELL, 45 DEG., CL200, 2'', BW |
| 10 |
| EA TEE, REDUCING, 1 1/2'' X 3/4'', SB |
| 2 |
| EA FLANGE, FLAT FACE, 4'', 150#, SW |
| 48 |
| EA OUTLET, 3000#, 3/4'' SW |
| 30 |
| EA DECK SLEEVE PENETRATION, 6'' |
| 10 |
| EA ELL, 45 DEG., CL200, 6'', BW |
| 24 |
| EA TEE, REDUCING, 4'' X 3'', CL 200, BW |
| 7 |
| EA TEE, REDUCING, 4'' X 2 1/2'', CL 200, BW |
| 7 |
| EA TEE, REDUCING, 3'' X 2 1/2'', CL 200, BW |
| 6 |
| EA REDUCER, CONCENT, 6'' X 4'', CL200, BW |
| 12 |
| EA ELL, 90 DEG., LONG RADIUS, CL200, 4'', BW |
| 13 |
| EA ELL, 45 DEG., CL200, 2 1/2'', BW |
| 10 |
| ELL, 45 DEG., CL200, 3'' BW |
| 18 |
| ELL, 45 DEG., CL200, 4'', BW |
| 14 |
| FLANGE, FLAT FACE, 1 1/2'', 150#, SW |
| 22 |
| TEE, REDUCING, 2 1/2'' X 1 1/2'', CL 200, BW |
| 10 |
| ELL, 45 DEG., CL200, 1 1/2'', BW |
| 50 |
| FLANGE, FLAT FACE, 2 1/2'', 150#, SW |
| 30 |
| ELL, 90 DEG., LONG RADIUS, CL200, 2'', BW |
| 10 |
| ELL, 45 DEG., SHORT RADIUS, 400#, 1/2'', SW |
| 30 |
| FLANGE, FLAT FACE, 6'', 150#, SW |
| 46 |
| TEE, REDUCING, 6'' X 4'', CL 200, BW |
| 7 |
| FLANGE, FLAT FACE, 3'', 150#, SW |
| 34 |
| FLANGE, FLAT FACE, 2'', 150#, SW |
| 20 |
| FLANGE, FLAT FACE, 1/2'', 150#, SW |
| 16 |
| THREAD-O-LET FITTING 1/2" NPT, 3000 PSI, CUNI 90/10 |
| 4 |
| CROSS, 400#, 1 1/2'', SW |
| 18 |
| OUTLET, 3000#, 1/2'' SW |
| 22 |
| COUPLING, REDUCING, 2 1/2 '' X 2'', SB |
| 2 |
| TUBE, SEAMLESS, CL200, 2 1/2'' |
| 100 |
| TUBE, SEAMLESS, CL200, 4'' |
| 225 |
| FLANGE, FLAT FACE, 3/4'', 150#, SW |
| 18 |
| FLANGE, FLAT FACE, 3/4'', 150#, SW |
| 18 |
| VALVE, BALL, 1-1/2'', UNION END, THRD, 400#, SB |
| 1 |
| ADAPTER, 1-1/2" MNPT X 1-1/2" MNH |
| 1 |
| ADAPTER, 1-1/2" MNPT X 1-1/2" FSWNH |
| 1 |
| GASKET, GARLOCK 9900, 40 SF (QU69.42OTE TWO 5'X5'X1/8" FOR 50 SF TOTAL ) |
| 50 |
| STUD, 1/2-13 UNC 2A, 2 1/4'' LENGTH |
| 72 |
| NUT, HEX, 1/2-13 UNC 2B |
| 144 |
| NUT, HEX, 1/2-13 UNC 2B |
| 160 |
| STUD, 1/2-13 UNC 2A, 2 3/4'' LENGTH |
| 80 |
| NUT, HEX, 5/8-11 UNC 2B |
| 240 |
| STUD, 5/8-11 UNC 2A, 3 1/2'' LENGTH |
| 120 |
| NUT, HEX, 3/4-10 UNC 2B |
| 400 |
| STUD, 3/4-10 UNC 2A, 4'' LENGTH |
| 208 |
| STUD, 5/8-11 UNC 2A, 5 1/4'' LENGTH |
| 16 |
| STUD, 3/4-10 UNC 2A, 5 3/4'' LENGTH |
| 32 |
| COUPLING, REDUCING, 4'' X 3'', SB |
| 2 |
| FLANGE, FLAT FACE, BLANK, 150#, 1 1/2'' |
| 2 |
| ELL, 90 DEG., LONG RADIUS, CL200, 1 1/2'', BW |
| 40 |
| TUBE, SEAMLESS, CL200, 1/2'' |
| 140 |
| TUBE, SEAMLESS, CL200, 3/4'' |
| 60 |
| TUBE, SEAMLESS, CL200, 2'' |
| 80 |
| TUBE, SEAMLESS, CL200, 3'' |
| 210 |
| REDUCING COUPLING 3/4" FEMALE NPT X 1/2" FEMALE NPT, 3000PSI, 316 STAINLESS STEEL |
| 18 |
| 1/2" COUPLING, 1/2" FEMALE NPT BOTH ENDS, 3000PSI, CUNI |
| 26 |
| 507 |
| Eddy Pump Dual EPCON AKE unit (includes seal air unit and electrical controller), one (1) each |
| 1 |
| Eddy Pump Eddy Discharge Pump, 2” inlet and 2” discharge, 10 HP motor and automatic greaser, (2) each |
| 2 |
Amercoat 240 Pastel Green
1 gal
| Amercoat 240 Off-White |
| 1 gal |
| 511 |
| 200mm/8” Fuel Drop Sampler, PN 16 (232 PSI), Chase Supply/Drew Marine PCN 1AA7917 |
| 2 |
| 250mm/10” Fuel Drip Sampler, PN 16 (232 PSI), Chase Supply/Drew Marine PCN 1AA7922 |
| 2 |
| 514 |
| 20" Dia, CUNI 90-10, ASTM B-467, 0.025 Wall Welded, Or Mil-T-16420 CL 200 SMLS |
| 12’ |
20" Dia, 150# Butterfly valves for saltwater service- Valves are to be LUGGED Type
High Performance Valves; Al/Brnz Body, Crane Valves (Flowseal), MSS-SP-68
| Flanges, Socket Weld, 10" CUNI 90-10, CL 150, ANSI B-16.5 |
| 24 |
| Flanges, Socket Weld, 20" CUNI 90-10, CL 150, ANSI B-16.5 |
| 24 |
| Bolt, Hex, 1-1/8"-8 UNC 2A, 3-1/4" Length, Alloy 400, NiCU, ASTM F468 |
| 288 |
| Bolt, Hex, 1-1/8"-8 UNC 2A, 2-3/4" Length, Alloy 400, NiCU, ASTM F468 |
| 36 |
| Bolt, Hex, 7/8"-9 UNC 2A, 3-1/2" Length, Alloy 400, NiCU, ASTM F468 |
| 144 |
| Bolt, Hex, 7/8"-9 UNC 2A, 5" Length, Alloy 400, NICU, ASTM F468 |
| 72 |
| Nut, Hex, 7/8"-9 UNC 2B, Alloy 405, NICU, ASTM F467 |
| 72 |
| 515 |
| LTFW Cooler Floating endframe, End Frame strong back with titanium lined strainer clean out port. 110mm thk, P/N: 136102022 |
| 3 |
End Plates with through port (Heat Exchanger Plates), Per OEM Design. GEA Ecoflex Gmbh-Titanium
0.6 mm Thk, P/N: 332435360
| Strainer Basket 316 Stainless with Diffuser Rings, P/N: 136102023 |
| 3 |
| Roller Assembly Steel, P/N: 137102563 |
| 3 |
| Gaskets, P/N: Z179/10004 |
| 353 |
| Scotch-grip plastic Adhesive 1099, Mil-A-138883B Type 1 and MMM-A-1 |
| 72 |
| 516 |
| 6" Gate Valve, Flanged, Bronze Body ASTM B-61, MSS-SP-80, PIMA No. B102E or equivalent |
| 4 |
| 4" Gate Valve, Flanged, Bronze Body ASTM B-61, MSS-SP-80, PIMA No. B102E or equivalent |
| 3 |
| 6" Flanges, Socket Weld, RF; CUNI 90-10, CL 150, ASTM B-369, ANSI B-16.5 or equivalent |
| 8 |
| 4" Flanges, Socket Weld, RF; CUNI 90-10, CL 150, ASTM A105, ANSI B-16.5 or equivalent |
| 6 |
| 517 |
| BFV 6 lug 150# DI FLGD ACRIS AMRI IL-31KF/S9 valves with attached handles |
| 12 |
| 518 |
| Planetary Gear + Safety Clutch, P/N: 3037394 |
| 1 |
| Bearing Plate, P/N: 03-138276/0 |
| 2 |
| Distance Ring, P/N: 03-138277/0 |
| 2 |
| Bearing Bolt, P/N: 03-135583/0 |
| 2 |
| Self Aligning Roller Bearing, P/N: 3028263 |
| 2 |
| Bronze Ring, P/N: 03-128736/0 |
| 2 |
| Bronze Ring, P/N: 03-138182/0 |
| 2 |
| Self Aligning Roller Bearing, P/N: 3013910 |
| 4 |
| Spherical Roller Bearing, P/N: 3027642 |
| 2 |
| Shaft Sealing Ring, P/N: 3010458 |
| 4 |
| Shaft Sealing Ring, P/N: 3011802 |
| 2 |
| Nilos - Ring, P/N: 3006662 |
| 4 |
| Hex Screw, P/N: 3001071 |
| 8 |
| Hex Screw, P/N: 3000634 |
| 16 |
| Cylinder Head Screw, P/N: 3011394 |
| 8 |
| 602 |
| Safety Net, (Reuse Existing Safety Net) |
| 1 |
| Outrigger, Foldable w/ Mounting Hardware, FASSMER DWG# 12.1566 279.00.00.0 (MSC DWG# 600-8392567) |
| 8 |
| 902 |
| Thordon Bearing, 1 piece, Composite |
| 1 |
| 903 |
| One (1) each Major Overhaul Kit for MD SEAL 712MM H74985-01, Part # WLP001326-001 |
| 1 |
| One (1) each Stern Tube Connecting Ring, Part # W084837235 |
| 1 |
| 904 |
| Seal Ring, P/N: 992804 |
| 3 |
| Seal Compound, P/N: 992008 |
| 1 |
| 907 |
| Proximity Probe, Riverhawk Company Integrated “D” Probe 34664 |
| 1 |
| Junction Box Assy (4”x4”), P/N: 34958 |
| 1 |
| Indiprox Module, P/N: IPM34940 |
| 1 |
| Proximity Probe Support Structure (Pre-fabricated), Carbon Steel |
| 1 |
| Proximity Probe Support Structure Mounting Brackets (Pre-fabricated), Carbon Steel |
| 2 |
| Cable from Proximity Probe Junction Box to Data Recorder, 16 Gauge Shielded Double Conductor Wire, LSDSGS-3 |
| 100ft |
| 908 |
| Cofferdam Assembly 6” nominal bore, Farwest PN: 20-30551 (carbon Steel) |
| 2 |
| STAPERM Reference Cell, GMC Corrosion & Elect PN: 05-15051 |
| 2 |
DC 6000 Data Recorder (NOTE: Already installed on ship), Monarch Instruments
DC-6-1-06-0-0-0-1-0
| NEMA 6000 Water Tight Enclosure, PN: BB-RMN400A |
| 1 |
| Shunts, 420 Ma, P/N: MSASSOR |
| 1 |
| Compact Flash Cards, P/N: MC1024MB |
| 1 |
| 909 |
| Epoxy A/C, Amercoat 240, Red Oxide |
| 200 gal |
| Epoxy A/C, Amercoat 240, Black |
| 200 gal |
| Ablative A/F, ABC-3, Red |
| 700 gal |
| Ablative A/F, ABC-3, Black |
| 200 gal |
| Markings, U/W, Amercoat 5450, White |
| 8 gal |
| Solvent, Amercoat 65 |
| 15 gal |
| Solvent, Amercoat T-10 |
| 200 gal |
| Solvent, Amercoat 15 |
| 2 gal |
| 915 |
| Crane Valve; Model: 24JG577315; VALVE, BUTTERFLY, WAFER, 24.00 IPS, 200PSI W/OPERATOR AND HANDWHEEL |
| 1 |
| 1001 |
| Amercoat 137 Epoxy(buff)1st prime |
| 83 gal |
| Amercoat 137 (dk Gray)-1st stripe |
| 5 gal |
| Amercoat 137 (buff)-2nd stripe |
| 5 gal |
| Amercoat 137 (dk gray)-2nd prime |
| 83 gal |
| Amercoat 138G Ty 1 (dk gray)-non skid |
| 720 gal |
| Amercoat 240 (dk gray)-Trim/edges |
| 12 gal |
| Amercoat 229T (white)-markings |
| 18 gal |
| Amercoat 229T (red)-markings |
| 2 gal |
| Amercoat T-10(solvent for 137 & 138G) |
| 7 gal |
| Amercoat 65 (Solvent for 229T) |
| 2 gal |
THIS PAGE INTENTIONALLY LEFT BLANK