SOW.doc

Statement of Work APN7-16 Requirement

BS-650013.APN7METCAL93- PHY/DIM OPT CALSTDS

A. Background The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets. All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy review to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Mfr. one year warranty with sticker affixed to each unit plus a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit. The manufacturer must be aware that the use and or reproduction their technical data and manuals by and for the government use only.

4. The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items.

B. Tasking:

The contractor shall provide the following equipment:

1) P/N 1140A Thermocouple Simulator-Calibrator Qty 69 To include the following:

a) General Source and Measure Specifications

b) Accuracy (24 hours): ±20 ppm + 1 μV

c) Stability with Time:

a. Six months: ±5 ppm + 1 μV

b. One year: ±10 ppm + 1.5 μV

d) Input Impedance: 10 MΩ ±5%, all ranges

e) Output Impedance: 0.05 Ω max. all ranges

f) Output Current: 50 mA min. limited to <100 mA

g) Output Slew Rate: 100 V/s

h) Common-mode Rejection: 160 dB at dc, 140 dB at 60 Hz

i) Noise: 1.0 μV peak, 0.1 Hz to 10 Hz, 95% confidence

j) Temperature Coefficient: 5 ppm/°C + 0.2 μV/°C

k) Terminals: Binding posts and mini-thermocouple connector

l) Interfaces: GPIB; Ethernet, and USB available

1. Thermocouple Mode

a) Temperature Scales:

a. Celsius

b. Fahrenheit

c. Rankine

d. Kelvin

b) Types: B, C, D, E, G, J, K, N, PLII, R, S, T

c) Settling Time: <200 ms to rated accuracy

d) Output Impedance: 0.05 Ω

e) Resolution: 6 digits, 0.01° max.

f) Conformity vs. NIST T/C Curve: < 0.4 μV

g) Temperature Standards: ITS-90 IPTS-68

h) Reference-junction Error: < 0.004°C/°C

2. Voltage Mode

a) Millivolt Ranges ( Auto ):

a. 0 to 999.9999 mV

b. 0 to 9999.999 mV

c. 0 to 11000.00 mV

b) Volt Ranges ( Auto ):

a. 0 to 9.999999 V

b. 0 to 11.00000 V dc

c) Resolution: 7 digits, 0.1 μV max.

d) Settling Time: <1 s to rated accuracy

3. Physical Properties

a) Height: 88.9 mm (3.5 in)

b) Width: 366 mm (14.4 in)

c) Depth: 356 mm (14.0 in)

d) Weight: 5 kg (11 lb) net

e) Power: 85 V ac to 250 V ac, 50 Hz to 60 Hz, 20 VA

f) Operating Temperature: 0°C to 50°C

g) Humidity: 10% to 90% noncondensing

4. USB and GPIB interfaces

5. Warranty cert and sticker

6. Calibration serialized

7. Calibration test report for each unit

2) P/N 1140A-BATTERY Rechargeable for 1140A Qty 114 To include the following:

a) 69 to be shipped in item one

b) MSDS sheets

3) P/N 1140A – CASE Carrying case for 1140A Thermocouple Simulator Calibrator QTY 69

To include the following:

a) Top flap

b) 1/32” polyester stiffener each side

c) Large slip pocket on front of bag

d) Velcro closure

e) 1/8” polyester stiffener on top of standard foam

f) ½” think closed cell foam

g) Side handle

h) Shoulder strap 15.50 long

i) Should pad

j) 5 wide x 15.50 long x 16.50 high

k) Name plate with model number and logo 7.50 wide

l) Must meet the transit drop test MIL-PRF-28800F Paragraph 4.5.5.4.2

C. Deliverables

Delivery of the equipment shall be provided at the following address:

NAVAIR Calibration Standards (UIC N48535)

Attn: Lou Cerrillo

BLDG 612, Bay 9 MCAS

Beaufort, SC 29904

Phone: (843)524-1405 D. Delivery Schedule:

1) First 10 1140A units (to include battery and case for each unit) to ship 30 days after award of contract. Remaining units (to include battery and case for each unit) will ship 10 units every 30 days last delivery shall be absolutely no later than March 01, 2018

2) P/N 1140A-BATTERY 45 units to ship with first shipment of 1140A’s not installed.

***EARLY & PARTIAL SHIPMENTS ACCECPTED***

E. Invoicing All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.

VENDOR – IF ELECTRONIC EQUIPMENT, PLEASE MARK BOX/PACKAGE CONTAINING ELECTRONIC EQUIPMENT WITH THE “DO NOT SCAN” STICKER