Statement_of_Work.doc

Statement of Work APN7-17 Requirement

A. REQUIREMENTS:

1. Mfr. one year warranty with sticker affixed to each unit or a warranty certificate if unable to affix sticker.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Manufacturer’s Standard Operating and servicing manuals (CD version acceptable) shall be provided with each unit. The DFARS clause listed below must be referenced in all contracts and the manufacturer made aware that the use/reproduction of tech data/manuals (for government use only) will follow these use guidelines.

DFARS SUBPART 227.71 - Rights in Technical Data

5. The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items in accordance with DFARS 252.227-7015 Technical Data--Commercial Items.

B. Tasking:

The contractor shall provide the following equipment:

1) P/N M-1011AOPT11 AC Ratio Standard OPT-11 Qty 15 To include the following:

a. Resolution 0.1 ppm

b. Terminal linearity 1.0 ppm or better

c. Bandwidth 50 to 10,000 Hz

d. Front and rear panel connectors

e. Fused input and output circuits

f. Parallel switches reduce contact resistance

g. Switch Resistors virtually eliminate switching transients

h. Ratio range from 1.111111 to -0.0111111

i. Maximum rms input voltage: 0.35 f (f in Hz) or 350 volts whichever is less

j. Resolution: 0.00001%

k. Terminal linearity: 0.0001% (1ppm) or better

l. Max effective series output impedance: R-3.5 ohms L-75 µH

m. Input impedance at 20V and 400 Hz: 200 K minimum

n. Weight 18lbs

o. Rack mount kit to include:

i. Adapter bracket Qty 1

ii. 10-32 x 3/8” flat head screw Qty 2

iii. 6-32x 3/8” flat head screw Qty 3

p. Rack mounted dimensions:

i. 48.3cm (19”) wide

ii. 13.3 cm (5-1/4”) high

iii. 38.4 cm (15-1/8”) deep

C. Deliverables

Delivery of the equipment shall be provided at the following address:

COMMANDER

NAVAIR Calibration Standards

MCAS, Attn: Lou Cerrillo

(UIC N48535)BLDG 612, Bay 9

Beaufort, SC 29904-5002 D. Delivery Date Delivery schedule as follows:

1 unit ARO 16 weeks then 1 unit every 3 weeks Final delivery of last unit shall be absolutely no later than November 01, 2018.

***PARTIAL SHIPMENT ACCECPTED***

E. Invoicing All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.

VENDOR – IF ELECTRONIC EQUIPMENT, PLEASE MARK BOX/PACKAGE CONTAINING ELECTRONIC EQUIPMENT WITH THE “DO NOT SCAN” STICKER