N0024418Q0280_DraftPWS_NCBM_VocationalEducationProgram.pdf

PERFORMANCE WORK STATEMENT

Date: 25 JUN 2018

Title: Vocational Education Programs

1. Scope. Naval Consolidated Brig (NAVCONBRIG) Miramar (Level II and III) has continuing requirements to provide school curriculum-based technical training to prisoners at NAVCONBRIG Miramar (NCBM). The service shall grant prisoner-students official documentation of completed labor hours; credits that are transferrable to other educational institutions; and, upon successful completion of the program, the educational institution shall award nationally recognized certification for each vocational training or courses completed per

Bureau of Personnel Instruction (BUPERSINST)1640.22. Per the American Correction Association (ACA) requirement, correctional facility’s vocational education programs must be relevant to the vocational needs of prisoners and to employment opportunities in the community (ACA 4-4467). For this effort, NCBM will utilize community resources in developing vocational education programs for its prisoners in accordance with (IAW)

ACA 4-4469.

For this effort, the contractor shall provide training on: (A.) Plumbing; and, (B.) Heating, Ventilation, and Air

Conditioning (HVAC). The contractor shall award each student a: (A.) documentation of completed labor hours; (B.) credits and transcripts that are transferrable to other educational institutions; and, upon successful completion of the program, (C.) nationally recognized certification (BUPERSINST 1640.22).

2. Qualifications/Certifications Requirements:

a. The contractor shall be accredited by the Accrediting Commission for Community and Junior Colleges

(ACCJC) and Western Association of Schools and Colleges (WASV).

b. The contractor shall be required to provide a vocational instructor that is a subject matter expert (SME) instructor with 5 or more years’ experience, providing curriculum-based training from an educational institution of higher learning.

c. Successfully pass NCIC background check.

d. Successfully pass PREA and Standards of Conduct training with the Brig Training Officer.

3. Tasks:

a. Training will be conducted in a classroom environment within the secured perimeter of the brig. The contractor shall be responsible for maintaining control and accountability of the students enrolled in the course. The contractor shall provide training materials, tools and equipment needed to accomplish the tasks.

b. The contractor shall commence training 30-calendar days after contract award. The contractor shall perform 120 hours of HVAC classroom instruction to 20 prisoners, 360 hours of Plumbing classroom instruction to 20 prisoners and two 30-hour Occupational Safety and Health Administration (OSHA) classes to 40 prisoners. The contractor shall provide training between 0630 and 1430, on weekdays

(Monday through Friday) except declared Federal holidays. The specific number of hours and days per week will be coordinated with the Vocational Director once the contract has been awarded.

c. The contractor shall provide instruction and practical application of occupational knowledge and skills in the Heating and Air Conditioning (HVAC) industry and provide students with a working knowledge of the tools and equipment associated with the modern HVAC industry. The contractor shall also provide career preparation standards, which include communication, interpersonal skills, problem solving, safety, technology, and other employment skills. Students who successfully complete the program will be qualified for entry-level positions in the HVAC industry, such as air conditioning installer and repair helper, refrigeration installer and furnace installer. At the minimum, the contractor provided course shall include the following contents:

1) 72 hour training in HVAC 1 Heating and Air conditioning-skills and concepts:

Communications

Definition of air conditioning

Basic electricity

Requirements of a circuit

Electrical measuring device

Schematic reading

Thermostats

Heating fundamentals

Heating components

Gas heating

Electric heating

2) 48 hour training in HVAC 2 Heating and Air Conditioning- skills and concepts:

Cooling fundamentals

Cooling components

Cooling installation

Heat pumps

General service

EPA certification preparation

Job search instruction

3) 30 hour training in OSHA safety standards-skills and concepts:

General industry & safety health hazards

Hazard identification, avoidance, control and prevention

Worker’s rights

Employer responsibilities

How to file a complaint

Worker safety & health resources

Material data safety sheet (MSDS)

OSHA logs (OSHA form 300)

d. The contractor shall provide instruction and practical application of occupational knowledge skills in the plumbing industry and provide students with a working knowledge of the tools, materials, systems, installation methods, and codes associated with the modern plumbing trade. The contractor shall also provide career preparation standards, which include communication, interpersonal skills, problem solving, safety, technology, and other employment skills. Students who successfully complete the program will be qualified for entry-level positions in the plumbing trade, such as plumber, estimator, pipe fitter, and plumber apprentice. At the minimum, the contractor provided course shall include the following contents:

1) 120 hour program duration in Plumbing I -skills and concepts:

Introduction to the plumbing trade

How plumbing protects the Health of the nation

Personal safety and Job site practices

Hand Tools

Power Tools

More plumbing principles

Water sources

Sewage disposal systems

Gases

Piping materials

Galvanic action

Plumbing fixtures

Job search instruction

2) 120 hour program duration Plumbing II - skills and concepts:

Introduction

Basic mathematics as it relates to plumbing

Basic Trigonometry as it relates to plumbing

Introduction and brief history of plumbing codes

Code-Administrative, definitions, general regulations

Plumbing fixtures, fittings, water heaters and vents

Water supply and distribution

Sanitary drainage, building sewers and private disposal systems

Indirect wastes, venting, traps and interceptors

Fuel gas piping

Storm drain and medical gas

Drawings

3) 120 hour program duration in Plumbing III-skills and concepts:

Introduction

Work place basic skills

Advanced plumbing math

Blueprint reading

Estimating

Advanced plumbing theory

Advanced sizing methods

4) 30 hour training in OSHA safety standards-skills and concepts:

General industry & safety health hazards

Hazard identification, avoidance, control and prevention

Worker’s rights

Employer responsibilities

How to file a complaint

Worker safety & health resources

Material data safety sheet (MSDS)

OSHA logs (OSHA form 300)

4. Period of Performance: TBD (12-Months from date of award.)

5. Place of Performance:

Naval Consolidated Brig Miramar

46141 Miramar Way, Suite 1

San Diego CA 92145-2135

6. Travel: None.

7. Government Furnished Property (GFP). No GFP.

8. Government Technical Point of Contact (TPOC)