16R2034_0003_Revise_SOW_and_Ext_Closing_Date.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

This modification is issued to revise the Statement of Work (SOW) and delete CDRL 0002. The new closing date is 06 June 2016. All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 8

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 01-Jun-2016

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00178-16-R-2034

X 9B. DATED (SEE ITEM 11)

26-Apr-2016

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

01-Jun-2016

CODE

NSWCDD 3

ATTN: DORA FAUNTLEROY, CODE 026

DORA.FAUNTLEROY@NAVY.MIL

17632 DAHLGREN ROAD STE 157

DAHLGREN VA 22448-5110

N00178 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00178-16-R-2034

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

The following have been modified:

CDRLS AND DIDS

1.

LINUX CLUSTER - SOW

LINUX CLUSTER

STATEMENT OF WORK (SOW)

1.0 BACKGROUND

The Naval Surface Warfare Center Dahlgren Division (NSWCDD) has a requirement for a High Performance Computing Cluster for performing physics-based computation. This system shall be a distributed memory Linux cluster, tailored to meet the requirements for highly parallel numerical computations of large problems with computational fluid dynamics, finite element and hydrocode software. The system shall also run visualization software for the large data sets produced by the numerical computations as well as mesh generation software to produce large computational meshes for complex geometries. Software to be run on the system includes computational software such as the CTH and ALE3D hydrocodes, Sierra Mechanics multiphysics suite, LSDYNA finite element software and the CRAFT flow solver, as well as VISIT and PARAVIEW visualization software. Candidate systems shall meet all of the following technical requirements.

2.0 APPLICABLE DOCUMENTS

2.1 Original Equipment Manufacturer (OEM) Specifications;

2.2 Linux GPU-Enabled Computing Cluster (Phase I) - System

Specifications (attached)

3.0 REQUIREMENTS

3.1 The vendor shall complete integration and configuration of machine on-site at the NSWCDD, including required software listed in “Linux GPU-Enabled Computing Cluster (Phase I) – System Specifications” document (attached).

3.2 The vendor shall demonstrate the visualization server on a user/client workstation.

3.3 The vendor shall train a NSWCDD representative on the

installation and configuration of the Linux OS, cluster package, visualization server, and clustered file system.

4.0 TRAVEL

The contractor will be required to travel in performance of this contract. The number of trips and types of personnel traveling shall be limited to the minimum required to accomplish work requirements and shall be coordinated with the technical point of contact. All travel shall be conducted in accordance with the FAR 31.205-46, “Travel Costs”, and the Federal Travel Regulations (FTR). The following travel is anticipated: Two

(2) personnel to Dahlgren, VA for five (5) days.

5.0 DATA DELIVERABLES

5.1 The vendor shall provide complete documentation of the

installation and configuration of the Linux operating system and cluster package (CDRL A001);

5.2 The contractor shall provide documentation for all hardware included (CDRL A003).

6.0 TECHNICAL POINT(S) OF CONTACT

Technical Point of Contact (TPOC) information will be given at the issuance of the award.

(End of Summary of Changes)