19R0167LPTA.docx

N0017419R0167

Section SF 1449 - CONTINUATION SHEET

Statement of Work Accelerator X-Ray Imaging and Control System Description:

The Indian Head Large Motor X-Ray System is a semi-automated system that uses power x-ray generators called linear accelerators to produce x-rays, digital detector arrays to convert x-ray energy into a useable signal and a motion control system to position the inspection items accurately. The software will have two main parts which must work together to allow the operator to use the system efficiently.

The first part of the system is the motion control system. The position of the DDA and the item being inspected must be remotely controlled from the control room which is located in a separate building. Accurate positioning of the detector and the item are necessary for a repeatable and accurate inspection. The movement is done by servo motors which are controlled using a EtherCat interface.

The second part of the system is the imaging system. A digital detector array converts radiation into an electrical signal that is proportional to the amount of radiation dose received in a period of time. This image data as it is sent from the panel via a CAT 6 cable, must be received by the computer, processed and saved to a file or sent to another program.

Hardware Requirements:

· Control Workstation with Synchronizer Module

· PC with Windows 10 Pro 64-bit

· Large format 4 Megapixel Display

· Synchronizer configured for Varian M-series Linear Accelerator.

· Synchronizer must have ability to be reconfigured to a different x-ray source by means of interchangeable chips without requiring re-soldering.

· Synchronizer configured for Varex 4343HE Digital Detector Array.

· Synchronizer must have ability to be reconfigured to a different imaging detector by means of interchangeable chips in a socket without requiring re-soldering.

· USB connection from computer to Synchronizer

· Minimum of 50 feet of cable from Synchronizer to Linear Accelerator

· Minimum of 50 feet of cable from Synchronizer to Digital Detector Array

· No wireless communication including Wifi or 802.11 devices.

· Trusted Platform Module (TPM) version 1.2 or higher.

· Digital Detector Array

· Varex 4343HE

· DRZ+ Conversion Screen

· 16.8 inch by 16.8 inch Active Area

· 139 µm Pixel Pitch

· 4 fps (1x), 15 fps (2x2)

· Energy Range up to 16MeV

· 16-bit Analog to Digital Converter

· Gigabit Ethernet Data Output

· Power Supply 110 VAC Software Requirements:

· Imaging System Interface

· Image Capture Interface:

· Select the panel mode (1x1 or 2x2)

· Select the number of frames for saving to be averaged from 1 to at least 32

· Select the Detector Gain, supporting all gains supported by the panel

· Select the Gain file to be used

· Select the Offset file to be used

· Image Display Interface

· Select the minimum and maximum pixel values to display. Use linear lookup tables to determine what pixel value to display on screen

· Use the mouse to adjust the minimum and maximum pixel values to display by holding down one mouse button and moving the mouse up or down and left and right. One direction should adjust the window width (the difference between the maximum and minimum pixel values) the other direction should adjust the window center (the halfway point between the min and max).

· Graphically show the distribution of pixel values currently being displayed on the image in a histogram. Graphically show which part of the histogram is currently being displayed on the screen.

· Display a part of the image by increasing the magnification, up to 800%. When using magnification, a small map should be on the screen which shows which part of the current image is being displayed. Moving the part of the image that is display should be done by holding down a mouse button and moving the mouse around.

· Display the pixel value of the single pixel that is directly under the mouse while the mouse is over the image display. Display the X & Y coordinates of that pixel.

· Include a tool to display the average pixel value and standard deviation of the pixels in a user selected sized box while the mouse is over the image display. Display the X & Y coordinates of the center of the box.

· Data Capture

· Ability to communicate with a Varex 4343 series DDA and Varex XRD 1622 XP 14 DDA.

· Capture binned data(2x2) when requested

· Apply the selected Gain file to all acquired images

· Apply the selected Offset file to all acquired images

· Apply the selected Bad Pixel map to all acquired images

· Capture the image using the selected number of averaged frames

· Capture the image using the selected Detector Gain

· Data Storage/Export

· Ability to save images as 16-bit TIFF, BMP or JPG

· Ability to send images to third party DICONDE analysis software including Yxlon, GEIT Rhythm, and CareSteam Digital Viewing Software)

· Motion System Interface

· Motion Control Interface

· Control servo motors at a user selected speed

· Communicate with limit switches to prevent over-travel

· Configure for control of 3 EtherCat servo motors, linear travel with limit switches on each end.

· Configure for control of 1 EtherCat servo motor in a rotary table.

· Control of servo motors from multiple sets of proportional joysticks. One set of joysticks will be in the control room. One set will be in the operating bay. All controls must be wired; no wireless transmissions are permitted.

· Expandable for control of at least 4 additional Ethercat servo motors.

· Motion Display Interface

· Display current location of each drive axis

· Allow users to set a home/zero position for each axis.

· Graphically display location of each drive axis relative to full length of travel and zero position.

· Display current speed setting for each drive axis.

· Show limit switch status Installation:

· The Imaging and Control Workstation will be installed onsite and connected to the existing Ethercat motion drives, M6A linear accelerator and digital detector array. Proper functioning of the synchronizer will be demonstrated by absence of any image artifacts when operating the accelerator at 6 MeV and 3.5 MeV. Proper functioning of the software will include demonstration of sending of data to the customers’ existing DICONDE viewing and archival system.

Warranty:

· Supplier will be responsible for correcting any deficiencies found within 12 months of delivery other than normal degradation of the digital detector array.

The following contacts are provided for this contract:

Any concerns regarding your contract, should be directed to the above mentioned personnel, or the Contracting Officer Carolyn Anderson at (301) 744-6545.

Imaging & Control System

FFP

with Synchronizer FOB: Destination

PSC CD: 7010

NET AMT

Digital Detector Array

FFP

PSC CD: 7010

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

RECEIVING

4522 MCMAHAN ROAD B116

INDIAN HEAD MD 20640-5125

301-744-4221

N00174

N00174

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.204-19 INCORPORATION BY REFERENCE OF REPRESENTATIONS AND CERTIFICATIONS (DEC 2014)

The Contractor's representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract.

(End of clause)

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Technical and past performance, when combined, are significantly more important than cost.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (MAY 2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

XX (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

XX (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

XX (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

XX (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

XX (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

XX(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

____ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

XX (28)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (Feb 1999) of 52.222-26.

XX (29)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212).

____ (ii) Alternate I (July 2014) of 52.222-35.

XX (30)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

____ (ii) Alternate I (July 2014) of 52.222-36.

XX (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

XX (33)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

XX (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

____ (43) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

____ (44) 52.223-21, Foams (Jun 2016) (E.O. 13693).

____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

XX (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (48) 52.225-5, Trade Agreements (AUG 2018) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Oct 2018) (31 U.S.C. 3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

____ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) _____ (A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xviii) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xix) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

52.225-18 PLACE OF MANUFACTURE (AUG 2018)

(a) Definitions. As used in this provision--

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

(b) For statistical purposes only, the offeror shall indicate whether the place of manufacture of the end products it expects to provide in response to this solicitation is predominantly--

(1) ( ___ ) In the United States (Check this box if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States); or

(2) ( ___ ) Outside the United States.

(End of provision)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

FAR: https://www.acquisition.gov/browsefar DFARS: https://www.acq.osd.mil/dpap/dars/dfarspgi/current/ NMCARS: http://www.secnav.navy.mil/rda/Pages/NMCARS.aspx

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

______Invoice and Receiving Report Combo Destination/Destination_______

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either “Invoice 2in1” or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert “See Schedule” or “Not applicable.”) (**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact. Jacqueline.a.todd@navy.mil

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

“Send additional notifications to: Jacqueline.a.todd@navy.mil. These individuals must be registered in WAWF to view documents.”]

“For invoicing questions: tammy.winters@navy.mil and NAVSEA.NSWC.IHEODTDVendorPay@navy.mil”

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

(End of text)

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (OCT 2018)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor’s expense with no cost or liability to the U.S. Government.

(b) The federal Government observes the following holidays:

HOLIDAYS*

New Year's Day Martin Luther King's Birthday Presidential Inauguration Day (Washington DC metro area only) President's Day Memorial Day Independence Day Labor Day Columbus Day Veteran's Day Thanksgiving Day Christmas Day

* Except for the Presidential Inauguration Day, if the actual date falls on a Saturday, the holiday will be observed the preceding Friday. If the holiday falls on a Sunday, the observance shall be on the following Monday.

The actual date of observance for each of the above holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/#url.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company’s established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation are as follows:

(g) All deliveries to the Receiving Officer, Bldg 116, shall be made Monday through Friday from 0730-1130 to 1230-1530, local time. Deliveries will not be accepted after 1530 . No deliveries will be accepted on federal government holidays.

(End of text)

IHEODTD 195 - SECTION L PROPOSAL REQUIREMENTS (NAVSEA/NSWC IHEODTD) (OCT 2013)

INSTRUCTIONS TO OFFERORS (LOWEST PRICE TECHNICALLY ACCEPTABLE)

INSTRUCTIONS TO OFFERORS:

Offerors shall submit the following information with their offer. Failure to do so will render an offer ineligible for award. Electronic copies will be accepted.

1. Four (4) copies of the Technical Volume.

2. One (1) copy of Past Performance Volume, including Past Performance Matrix, and Past Performance Questionnaires

3. One (1) copy of the Price Volume, containing the completed and signed Request for Proposal (RFQ) package, with all representation certifications executed, and with prices provided for all quantities within each line item in Section B.

Offerors responding to this quotation may submit their quote in accordance with their standard commercial practices (e.g. on company letterhead, formal quotes form, etc.) but must include the following information:

1.) Company's complete mailing and remittance addresses, discounts for prompt payment, if any (e.g. 1% 10 days), ability to meet delivery requirement and unit cost of product.

2.) The company's CAGE code, Dun & Bradstreet Number, and Taxpayer ID number.

3.) For a quote on a comparable commercial item, product literature must be included.

4.) Point of Contact Information for Offeror 5.) Point of Contact Information for Person(s) Authorized to Negotiate 6.) Name, title, and signature of person authorized to sign the quotation

NON-PRICE EVALUATION FACTOR 1: TECHNICAL CAPABILITY (Not to Exceed 20 pages)

The Offeror shall demonstrate an adequate and complete understanding of the requirements contained in the Statement of Work (SOW) for Accelerator X-Ray Imaging and Control System. The Offeror shall also demonstrate an adequate understanding of the Government requirements regarding the specified deliverable. The Offeror’s technical approach shall demonstrate the necessary skills, knowledge, and capabilities to successfully perform tasks listed in the SOW.

The Offeror shall provide evidence to demonstrate the ability of their software to transfer images to DICONDE imaging viewing and archival systems include GEIT Rhythm, Yxlon Image 3000 and Carestream. Image transfer must occur through an automated process that automatically transfers image data such as item name, study description, series description, etc. Images must retain original 16-bit grayscale.

The Offeror shall provide evidence to demonstrate successful operation of their synchronizer module with the Varex M3A and M6A linear accelerators. The Offeror shall demonstrate that the synchronizer supports pulse generation rates from 50 pps to 450 pps. The Offeror shall demonstrate that the synchronizer can be reconfigured to work with a different model of linear accelerator by replacing no components other than a chip in the synchronizer and the associated data cables. The Offeror shall demonstrate that the synchronizer works with a minimum of 50 feet of cable between the synchronizer and the linear accelerator. The Offeror shall demonstrate that they are authorized by Varex to configure linear accelerators.

The Offeror shall provide evidence to demonstrate successful operation of their synchronizer module with the Varex 4343HE and Perkin Elmer 1621 digital detector arrays. The Offeror shall demonstrate that the synchronizer allows full control of frame capture rate at all speeds supported by the 4343HE and PE 1621 panels. The Offeror shall demonstrate that the synchronizer can be reconfigured to work with a different model of digital detector array by replacing no components other than a chip in the synchronizer and the associated data cables.

The Offeror shall provide evidence to demonstrate that their synchronizer corrects for all artifacts caused by the pulsed nature of the linear accelerator x-ray generation process. The Offeror shall demonstrate that the operation of the synchronizer is controlled entirely by the computer interface and that all settings including but not limited to linear accelerator frequency and digital detector array frame rate are controllable via the computer interface software. The Offeror shall demonstrate that the synchronizer is an external device connected to the computer by way of a USB connection.

The Offeror shall provide evidence to demonstrate that their software is compatible with EtherCAT motion control drives. The Offeror shall demonstrate that their software supports handheld controllers with buttons and joysticks to provide simultaneous control of multiple motion control drives.

The Offeror shall provide a schedule for delivery and installation of the Accelerator X-Ray Imaging and Control System required by the quotation indicating at a minimum:

a. Delivery of the Image Capture Workstation and Synchronizer;

b. Installation of the Image Capture Workstation and Synchronizer;

c. Delivery of the Digital Detector Array

The Offeror shall address the nature, difficulties, uncertainties, and risks associated with performing the kind of work that will be required.

General statements, that the Offeror can or will comply with the requirements, that standard procedures will be used, that well known techniques will be used, or that paraphrases the quotation’s requirements in whole or in part, will not constitute compliance with the foregoing requirements concerning the content of the Technical proposal and may deem the Offeror technically unacceptable.

Any exception to contract terms and conditions or to a requirement under the SOW must be specifically identified and shall include an accompanying rationale for the exception.

DO NOT PROVIDE PRICING INFORMATION IN THE TECHNICAL VOLUME.

NON-PRICE EVALUATION FACTOR 2: PAST PERFORMANCE

The Offeror shall provide up to three references listed on the past performance matrix (Attached) for federal government contracts for supplies performed in the last five years from the date of issuance of the quotation that are the same or similar to those required under this procurement. The Government will reconcile these references against entries contained in the Contractor Performance Assessment Reporting System (CPARS), Past Performance Information Retrieval System (PPIRS) (http://www.ppirs.gov/), Federal Awardee Performance and Integrity Information System (FAPIIS), and the Product Data Reporting and Evaluation Program (PDREP). If the Offeror does not have any Federal Government contracts, then list state, local, or commercial contracts, in that order.

Contractors unable to provide the above referenced past performance information may provide contractor past performance questionnaires (Attached). Failure to submit any Contractor Past Performance Questionnaires shall be considered certification that the contractor has no record of relevant and meaningful past performance for the Government to evaluate. In that case, the Offeror shall affirmatively state that it possesses no relevant past performance and explain why it has no relevant past performance or cannot provide any Questionnaires. Failure to provide the required information or to provide an explanation may result in the removal of the Offeror from consideration for award.

The Past Performance Questionnaire includes questions on (1) customer satisfaction; (2) timeliness; (3) technical success; (4) program management; and (5) quality. The Government will not assign a rank to the Past Performance factor, but will determine the acceptable or unacceptable nature of the past performance for each Offeror based on the information provided and review of other sources of past performance information available to the Government.

Relevant past performance is defined as experience that is of the same or similar scope (i.e, for the same or similar items), of the same or similar magnitude, and of the same or similar complexity to that which is described in the quotation. Recent past performance is defined as experience within the last five years from date of quotation.

FACTOR 3: PRICE

This volume is the only volume that shall contain price information. There is no limitation on the number of pages or print size for the price proposal. All attachments to the Price Volume shall be clearly identified. The Price Volume shall include the completed RFQ document, with Section B, pricing filled in. Proposed prices shall be provided for all quantities for all contract line items (CLINs), to include any warranty and delivery charges to destination in accordance with the quotation term “FOB – Destination.”

ADDITIONAL INSTRUCTIONS

The entire completed and signed RFQ shall be returned as part of the offer. Be sure to complete all representations and certifications in the quotation. If using the System for Award Management (SAM), complete any representations and certifications for provisions in the quotation that are not included in SAM.

As a result of the…