N00167-16-T-0055_Statement_of_Work.pdf

HD-732C/UD Air Particle Sampler (APS) Upgrade and Refurbishment Parts

Purchase Description

1. SCOPE

1.1. Scope: This purchase description defines the requirements for the purchase of parts to prepare for the upgrade and refurbishment of the US Navy’s HD-732C/UD Air Particle Sampler (APS).

1.2. Introduction: The Navy uses the APS units to monitor airborne levels of radioactive particulates in areas of concern for radioactive contamination. As the units continue to age and require repair, the issue of parts obsolescence must be addressed. To remediate this problem and prolong the functionality of the existing units, the Navy’s APS units are to be upgraded and refurbished into units designated as HD-732D/UD.

Before units are sent to the vendor, however, certain parts must be purchased and included with the unit to ensure all units are in the same condition.

1.3. Objectives: NAVSEA 04ND, through the Naval Surface Warfare Center Carderock Division (NSWCCD), is soliciting industry for the procurement of parts needed for the upgrade and refurbishment of the HD-

732C/UD.

2. APPLICABLE DOCUMENTS

2.1. The following drawings form a part of this document to the extent specified herein:

HD-732C/UD Drawings 303469, 303470, 6525773, 6525723, 6525724, 6525742, 6525743, 6525800, 6525806, 6525808, 6525752, 6525753, 6525754.

3. DELIVERABLES

3.1. CLIN 0001- Handle Spacer- A quantity of one hundred (100) stock handle spacers (Navy Part No.

6526728, Stock No. 5365-01-306-8799) shall be provided to the Navy.

3.2. CLIN 0002- Handle Shoulder Screw- A quantity of one hundred (100) stock handle shoulder screws

(Navy Part No. MS51975-8, Stock No. 5305-00-914-3818) shall be provided to the Navy.

3.3. CLIN 0003- Filter Holder - A quantity of one hundred fifty (150) filter holders for the HD-732C/UD shall be manufactured in accordance with HD-732C/UD drawing 303469 and provided to the Navy.

3.4. CLIN 0004- Screen Holder- A quantity of one hundred fifty (150) screen holders for the HD-732C/UD shall be manufactured in accordance with HD-732C/UD drawing 303470 and provided to the Navy.

3.5. CLIN 0005- Handle- A quantity of one hundred (100) handles for the HD-732C/UD shall be manufactured in accordance with HD-732C/UD drawing 6526773 and provided to the Navy.

3.6. CLIN 0006- Cases- A quantity of one hundred (100) HD-732C/UD cases shall be manufactured in accordance with HD-732C/UD drawings 6525723 and 652572 and provided to the Navy. Labels noted in the drawings are not to be included on the cases.

3.7. CLIN 0007- Commutator- A quantity of one hundred (100) commutators for the HD-732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525742 and provided to the Navy.

3.8. CLIN 0008- Shaft- A quantity of one hundred (100) shafts for the HD-732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525743 and provided to the Navy.

3.9. CLIN 0009- Vent Plug - A quantity of two hundred (200) vent plugs for the HD-732C/UD motor housing shall be manufactured in accordance with HD-732C/UD drawing 6525800 and provided to the Navy.

3.10. CLIN 00010- Propeller- A quantity of one hundred (100) propellers for the HD-732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525806 and provided to the

Navy.

3.11. CLIN 0011- Magnet- A quantity of one hundred (100) magnets for the HD-732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525808 and provided to the Navy.

3.12. CLIN 0012- Barrel- A quantity of one hundred (100) barrels for the HD-732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525752 and provided to the Navy.

3.13. CLIN 0013- Twist Lock Sleeve- A quantity of one hundred (100) twist lock sleeves for the HD-

732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525753 and provided to the Navy.

3.14. CLIN 0014- Retaining Sleeve- A quantity of one hundred (100) retaining sleeves for the HD-

732C/UD flowmeter shall be manufactured in accordance with HD-732C/UD drawing 6525754 and provided to the Navy.

3.15. Shipping- The specified parts shall be delivered to the following address: Naval Surface Warfare

Center, Carderock Division; 9500 MacArthur Blvd.; West Bethesda, MD 20817; Attn: Stanley

Mavrogianis, Code 6301; Building 157.

4. GOVERNMENT FURNISHED INFORMATION

The following drawings will be provided as Government Furnished Information:

4.1. 303469

4.2. 303470

4.3. 6525773

4.4. 6525723

4.5. 6525742

4.6. 6525743

4.7. 6525800

4.8. 6525806

4.9. 6525808

4.10. 6525752

4.11. 6525753

4.12. 6525754

5. TRAVEL REQUIREMENTS - None.

6. GOVERNMENT FURNISHED EQUIPMENT (GFE) – None.

7. PERFORMANCE

7.1. Period of Performance- The period of performance shall be within one hundred twenty (120) days following contract award.

7.2. Place of Performance- The primary place of performance shall be the contractor’s facility.

8. SECURITY REQUIREMENTS

8.1. All work under this contract will be UNCLASSIFIED.

8.2. The contractor will have access to UNCLASSIFIED information that may be sensitive and inappropriate for release to the public. The contractor shall seek permission from the Navy before sharing such information with its sub-contractors.