23Q0194_SOL_0002.pdf

N0016423Q0194

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is as follow s:

1. Add CDRL A002 Safety Assessment Report - Hazard Assessment Report

2. Update Statement of Work to add CDRL A002

3. Add CLIN 0006 as OPTION #1 for additional CONUS training locations

4. Add Option Clauses 52.217-8 and 52-217-9

5. Extend Closing Date to Monday July 31, 2023 at 3:00 PM Eastern Standard Time

6. Add NAVSEA Draw ing 8477552 REV C to replace 8477552 REV B. CLIN references update w ith new revisions

7. Added clauses 52.222-49, 52.204-27, and provision 52.217-5

All other terms and conditions remain the same.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 19

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 28-Jul-2023

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X N0016423Q0194

X 9B. DATED (SEE ITEM 11)

14-Jun-2023

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

28-Jul-2023

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

K. STRUNK (812-854-8236)

BLDG 3373

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0001

The CLIN extended description has changed from:

Certified Fiber Optic Fabricator Training for 12 students IAW Statement of Work (SOW), CDRLA001 and NAVSEA Drawing 8477552 REV BTraining session shall be at Norfolk VA for FIVE days (5).Period of Performance 07/07/2023 through 12/31/2023To include furnishing all supplies, tools, materials, supervision and transportation FOB DestinationAccelerated deliveries will be acceptable at no additional cost to the GOVT.The Service Contract ActWage Determination No: 2015-4341Revision No: 22Date of Last Revision: Dec 27, 2022Applies to

RFQ: N0016423Q0194VENDOR MUST POST SERVICE CONTRACT ACT POSTER WH-

1313 UPON AWARD.IF THE VENDOR DETERMINES EXEMPTION TO THE SERVICE

CONTACT ACT IS APPLICABLE, THE VENDOR MUST FILL OUT FAR PROVISION

52.222-52 AND/OR REPRESENTATION AND CERTIFICATION FAR 52.204-

8.ADDITIONAL SERVICE CONTRACT ACT APPLICABLE CLAUSES;FAR 52.222-41-,

52.222-42, 52.222-55, 52.222-62WARNING:THIS DOCUMENT CONTAINS TECHNICAL

DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT LAWS ACT (TITLE

22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE ORDER 12470. VIOLATIONS OF

THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

To:

Certified Fiber Optic Fabricator Training for 12 students = 1 LOT= 1 STUDENT IAW Statement of Work (SOW), CDRLA001 and NAVSEA Drawing 8477552 REV CTraining session shall be at Norfolk VA for FIVE days (5).Period of Performance Date of Award through 12/31/2023To include furnishing all supplies, tools, materials, supervision and transportation FOB DestinationAccelerated deliveries will be acceptable at no additional cost to the GOVT.The Service Contract ActWage Determination No: 2015-4341Revision No: 24Date of Last Revision:

June 30 2023Applies to RFQ: N0016423Q0194VENDOR MUST POST SERVICE

CONTRACT ACT POSTER WH-1313 UPON AWARD.IF THE VENDOR DETERMINES

EXEMPTION TO THE SERVICE CONTACT ACT IS APPLICABLE, THE VENDOR MUST

FILL OUT FAR PROVISION 52.222-52 AND/OR REPRESENTATION AND

CERTIFICATION FAR 52.204-8.ADDITIONAL SERVICE CONTRACT ACT APPLICABLE

CLAUSES;FAR 52.222-41-, 52.222-42, 52.222-55, 52.222-62WARNING:THIS DOCUMENT

CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT LAWS ACT (TITLE 22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE

ORDER 12470. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE

CRIMINAL PENALTIES.

CLIN 0002

Certified Fiber Optic Fabricator Training for 12 students IAW Statement of Work (SOW), CDRLA001 and NAVSEA Drawing 8477552 REV BTraining session shall be at SAN DIEGO, CA for FIVE days (5).Period of Performance 07/07/2023 through 12/31/2023To include furnishing all supplies, tools, materials, supervision and transportation FOB DestinationAccelerated deliveries will be acceptable at no additional cost to the GOVT.The Service Contract ActWage Determination No: 2015-4341Revision No: 22Date of Last Revision:

Dec 27, 2022Applies to RFQ: N0016423Q0194VENDOR MUST POST SERVICE

CONTRACT ACT POSTER WH-1313 UPON AWARD.IF THE VENDOR DETERMINES

EXEMPTION TO THE SERVICE CONTACT ACT IS APPLICABLE, THE VENDOR MUST

FILL OUT FAR PROVISION 52.222-52 AND/OR REPRESENTATION AND

CERTIFICATION FAR 52.204-8.ADDITIONAL SERVICE CONTRACT ACT APPLICABLE

CLAUSES;FAR 52.222-41-, 52.222-42, 52.222-55, 52.222-62WARNING:THIS DOCUMENT

CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT LAWS ACT (TITLE 22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE

Certified Fiber Optic Fabricator Training for 12 students 1 LOT= 1 STUDENT IAW Statement of Work (SOW), CDRLA001 and NAVSEA Drawing 8477552 REV CTraining session shall be at SAN DIEGO, CA for FIVE days (5).Period of Performance Date of Award through 12/31/2023To include furnishing all supplies, tools, materials, supervision and transportation FOB DestinationAccelerated deliveries will be acceptable at no additional cost to the GOVT.The Service Contract ActWage Determination No: 2015-5635Revision No: 21Date of Last Revision:

Dec 27, 2022Applies to RFQ: N0016423Q0194VENDOR MUST POST SERVICE

CONTRACT ACT POSTER WH-1313 UPON AWARD.IF THE VENDOR DETERMINES

EXEMPTION TO THE SERVICE CONTACT ACT IS APPLICABLE, THE VENDOR MUST

FILL OUT FAR PROVISION 52.222-52 AND/OR REPRESENTATION AND

CERTIFICATION FAR 52.204-8.ADDITIONAL SERVICE CONTRACT ACT APPLICABLE

CLAUSES;FAR 52.222-41-, 52.222-42, 52.222-55, 52.222-62WARNING:THIS DOCUMENT

CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT LAWS ACT (TITLE 22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE

ORDER 12470. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE

CLIN 0003

Certified Fiber Optic Fabricator Training for 20 students IAW Statement of Work (SOW), CDRLA001 and NAVSEA Drawing 8477552 REV BTraining session shall be at NSWC CRANE, IN for FIVE days (5).Period of Performance 07/07/2023 through 12/31/2023To include furnishing all supplies, tools, materials, supervision and transportation FOB DestinationAccelerated deliveries will be acceptable at no additional cost to the GOVT.The Service Contract ActWage Determination No: 2015-4341Revision No: 22Date of Last Revision:

Dec 27, 2022Applies to RFQ: N0016423Q0194VENDOR MUST POST SERVICE

CONTRACT ACT POSTER WH-1313 UPON AWARD.IF THE VENDOR DETERMINES

EXEMPTION TO THE SERVICE CONTACT ACT IS APPLICABLE, THE VENDOR MUST

FILL OUT FAR PROVISION 52.222-52 AND/OR REPRESENTATION AND

CERTIFICATION FAR 52.204-8.ADDITIONAL SERVICE CONTRACT ACT APPLICABLE

CLAUSES;FAR 52.222-41-, 52.222-42, 52.222-55, 52.222-62WARNING:THIS DOCUMENT

CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT LAWS ACT (TITLE 22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE

Certified Fiber Optic Fabricator Training for 20 students 1 LOT= 1 STUDENT IAW Statement of Work (SOW), CDRLA001 and NAVSEA Drawing 8477552 REV CTraining session shall be at NSWC CRANE, IN for FIVE days (5).Period of Performance Date of Award41 through 12/31/2023To include furnishing all supplies, tools, materials, supervision and transportation FOB DestinationAccelerated deliveries will be acceptable at no additional cost to the GOVT.The Service Contract ActWage Determination No: 2015-4821Revision No: 24Date of Last Revision:

June 30, 2023Applies to RFQ: N0016423Q0194VENDOR MUST POST SERVICE

CONTRACT ACT POSTER WH-1313 UPON AWARD.IF THE VENDOR DETERMINES

EXEMPTION TO THE SERVICE CONTACT ACT IS APPLICABLE, THE VENDOR MUST

FILL OUT FAR PROVISION 52.222-52 AND/OR REPRESENTATION AND

CERTIFICATION FAR 52.204-8.ADDITIONAL SERVICE CONTRACT ACT APPLICABLE

CLAUSES;FAR 52.222-41-, 52.222-42, 52.222-55, 52.222-62WARNING:THIS DOCUMENT

CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT LAWS ACT (TITLE 22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE

ORDER 12470. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE

CLIN 0004

NOT SEPARATELY PRICEDTraining Certification CardsTechnical Data Requirements for CLIN 0001, CLIN 0002, & CLIN 0003 IAW Statement Work (SOW) CDRL A001 EXHIBIT

AALL TECHNICAL DATA/DATA GENERATED UNDER THIS PROCUREMENT HAS

BEEN PAID FOR IN FULL BY THE GOVERNMENTThe Government will retain rights to all intellectual property produced in the course of developing, deploying,training, using and supporting NSWC Crane under N0016423Q0194. All modifications to N0016423Q0194 will be the property of the Government. The Government shall have unlimited data rights to all data generated. IAW DFARS 252.227-7015. The Contractor will be required to negotiate agreements with commercial system vendors relating to nondisclosure of vendor proprietary information.

"DATA RIGHTS" - are for those data deliverables under sow (s) to include the following. CDRL A001. In addition ref DFARS 252.227-7015, DFARS 252.227-7027, DFARS 252.227-7030, DFARS 252.227-7037 and DFARS 252.246-7001

NOT SEPARATELY PRICEDTraining Certification CardsTechnical Data Requirements for CLIN 0001, CLIN 0002, CLIN 0003, and Option CLIN 0006 IAW Statement Work (SOW)

CDRL A001 EXHIBIT AALL TECHNICAL DATA/DATA GENERATED UNDER THIS

PROCUREMENT HAS BEEN PAID FOR IN FULL BY THE GOVERNMENTThe Government will retain rights to all intellectual property produced in the course of developing, deploying,training, using and supporting NSWC Crane under N0016423Q0194. All modifications to N0016423Q0194 will be the property of the Government. The Government shall have unlimited data rights to all data generated. IAW DFARS 252.227-7015. The Contractor will be required to negotiate agreements with commercial system vendors relating to nondisclosure of vendor proprietary information. "DATA RIGHTS" - are for those data deliverables under sow (s) to include the following. CDRL A001. In addition ref DFARS 252.227-7015, DFARS 252.227-7027, DFARS 252.227-7030, DFARS 252.227-7037 and

DFARS 252.246-7001

CLIN 0005 is added as follows:

ITEM NO SUPPLIES/SERVICES QTY U/I UNIT PRICE AMOUNT

0005 CDRL A002

1 Lot

NOT SEPARATELY PRICED

Mishap Reporting Safety Assessment Report - Hazard Assessment Questionaire Technical Data Requirements for CLIN 0001, CLIN 0002, CLIN 0003, and OPTION CLIN 0006 IAW Statement Work (SOW) and CDRL A002 Exhibit B

ALL TECHNICAL DATA/DATA GENERATED UNDER THIS PROCUREMENT HAS BEEN PAID FOR

IN FULL BY THE GOVERNMENT

The Government will retain rights to all intellectual property produced in the course of developing, deploying,training, using and supporting NSWC Crane under N0016423Q0194. All modifications to

N0016423Q0194 will be the property of the Government. The Government shall have unlimited data rights to all data generated. IAW DFARS 252.227-7015. The Contractor will be required to negotiate agreements with commercial system vendors relating to nondisclosure of vendor proprietary information. "DATA RIGHTS" -are for those data deliverables under sow (s) to include the following. CDRL A002. In addition ref DFARS 252.227-7015, DFARS 252.227-7027, DFARS 252.227-7030, DFARS 252.227-7037 and DFARS 252.246-

PSC: U006

FOB: Destination

FFP

CLIN 0006 is added as follows:

ITEM NO SUPPLIES/SERVICES QTY U/I UNIT PRICE AMOUNT

0006 OPTION 1 FIBER OPTIC

FABRICATOR TRAINING

100 Lot

OPTION OPTION #1 - FIBER OPTIC FABRICATOR TRAINING

Certified Fiber Optic Fabricator Training IAW Statement of Work (SOW), CDRL A001, CDRL A002, and NAVSEA Drawing 8477552 REV C Training session to conducted at CONUS training locations for FIVE days (5).

This option can be exercised multiple times. Sessions should be a minimum class quantity of 6 students and no more than 20 students per session.

TERM OF USE:

QTY One (1) through One Hundred (100) Shall be no more than 100 This option 1 can be exercised multiple times Until total option QTY is met.

Effective date of award through 36 months

(1 LOT= 1 STUDENT)

PERIOD OF PERFORMANCE: Date of Award throuigh 36 Months

NTE $120,000.00

Vendor should not proceed with any options until a SF30 is signed and recieved by the Contracting Officer.

To include furnishing all supplies, tools, materials, supervision and transportation FOB Destination

Accelerated deliveries will be acceptable at no additional cost to the GOVT.

The Service Contract Act Shall be Determined at time of exercise of each option(s) Wage Determination No: Will be based on location of training Revision No:

Date of Last Revision:

Applies to RFQ: N0016423Q0194

VENDOR MUST POST SERVICE CONTRACT ACT POSTER WH-1313 UPON AWARD.

IF THE VENDOR DETERMINES EXEMPTION TO THE SERVICE CONTACT ACT IS APPLICABLE,

THE VENDOR MUST FILL OUT FAR PROVISION 52.222-52 AND/OR REPRESENTATION AND

CERTIFICATION FAR 52.204-8.

ADDITIONAL SERVICE CONTRACT ACT APPLICABLE CLAUSES;

FAR 52.222-41-, 52.222-42, 52.222-55, 52.222-62, and 52.222-49

WARNING:

THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS

EXPORT LAWS ACT (TITLE 22, U.S.C. SECTION 2751, ET. SEQ.) OR EXECUTIVE ORDER 12470.

VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

PSC: U006

FFP

The following have been modified:

STATEMENT OF WORK

Statement of Work NAVSEA Certified Navy Shipboard Fiber Optic Installer

In accordance with NAVSEA Drawing 8477552, Rev C

1.0 Scope

NAVSEA IWS2 requires shipboard fiber optic training courses to include instructor travel and ancillary materials.

The courses will be held at Norfolk, VA and San Diego, CA, and Crane, IN, with an estimated periods of performance of 01Jul2023-31DEC2023. Training shall be held during working hours, excluding federal holidays.

1.1 Background

WXM Fleet support, ship installations personnel (Civilians, Contractors, Military) located at Crane, Indiana, San Diego, California and Norfolk, Virginia require Fiber Optic Installer Course training to maintain forward deployed AN/SLQ-32(V)6 systems.

2.0 Applicable Documents

NAVEA Drawing 8477552 Rev C MIL-STD-2042 Rev C MIL-STD-1678-1 Rev D NSWCCRANEINST 3070.1 Operations Security Documents NSWCCRANEINST 5211.1C Privacy Act Program NSWCCRANEINST 5510.1B Security Policy, Procedures and Program Manual NSWCCRANEINST 5510.1B Ch5 Insider Threat Program

3.0 Requirements

3.1 Training Requirements

The vendor shall provide proof that the company and its personnel are on the Certified Fiber Optics Trainers List as stated in NAVSEA Drawing 8477552 Rev C, Appendix B.1. Indicating that the organization has been vetted and authorized by NAVSEA’s Naval Warfare Center to provide Navy shipboard fiber optic testing and termination training. This training is intended for personnel that will be installing and repairing Fiber Optic on board US Navy Ships.

CLIN 0001 Fiber Optic Installer Course - (12) students, at Norfolk VA, POP 01July2023-31DEC2023 Training session shall be at Norfolk VA to include all materials, training facility, and instructor’s travel expenses to Norfolk VA.

Place of performance is at Norfolk VA in contractors facility. The contractor shall contact John Thompson; 812 854 4203, john.c.thompson1.civ@us.navy.mil as well as the points of contacts in the state of work for the specific location at Norfolk VA.

CLIN 0002 –Option #1 Fiber Optic Installer Course - (12) students, at San Diego, CA, POP 01July2023-

31DEC2023

Training session shall be at San Diego, CA to include all materials, training facility, and instructor’s travel expenses to San Diego, CA

Place of performance is at San Diego, Ca in contractors facility. The contractor shall contact John Thompson; 812 854 4203, john.c.thompson1.civ@us.navy.mil as well as the points of contacts in the state of work for the specific location at San Diego, CA.

CLIN 0003 Fiber Optic Installer Course - (20) students, at Crane IN, POP 01July2023-31DEC2023 Training session shall be at Crane, IN to include all materials IAW 5.2.2 (NAVSEA Drawing 8477552 Rev B), training facility, and instructor’s travel expenses to Crane, IN.

Place of performance is at Crane, IN in government facility. The contractor shall contact John Thompson; 812 854 4203, john.c.thompson1.civ@us.navy.mil as well as the points of contacts in the state of work for the specific location at Crane, IN.

3.2 CLIN 0001 Fiber Optic Installer Course

This training shall include the following items in NAVSEA Drawing 8477552 Rev C. para 5.2.1.2 and to all training materials identified in NAVSEA Drawing 8477552 Rev C. para 5.2.2.

3.4.1 The training curriculum shall provide the following modules:

1) CORE module.

2) Classroom lecture/demonstrates for all associated training modules.

3) Hands-on lab with qualified/approved fiber components and tools for all associated training modules

4) Lessons learned from Navy Shipboard Fiber Optics installations for all associated training modules.

Lessons learned shall be provided or approved by the NSWCDD Fiber Optics Section.

5) Interfacing with non-fiber optic installation activities and the impact of their installations (e.g., Cable banding, cable routing, installations affecting access to FOCP boxes, etc.) for all associated training modules.

3.3 CLIN 0002 Fiber Optic Installer Course

This training shall include the following items in NAVSEA Drawing 8477552 Rev C. para 5.2.1.2 and all training materials identified in NAVSEA Drawing 8477552 Rev C. para 5.2.2.

3.4.2 The training curriculum shall provide the following modules:

1) CORE module.

2) Classroom lecture/demonstrates for all associated training modules.

3) Hands-on lab with qualified/approved fiber components and tools for all associated training modules

4) Lessons learned from Navy Shipboard Fiber Optics installations for all associated training modules. Lessons learned shall be provided or approved by the NSWCDD Fiber Optics Section.

5) Interfacing with non-fiber optic installation activities and the impact of their installations (e.g., Cable banding, cable routing, installations affecting access to FOCP boxes, etc.) for all associated training modules.

3.4 CLIN 0003 Fiber Optic Installer Course

This training shall include the following items in NAVSEA Drawing 8477552 Rev C. para 5.2.1.2 and all training materials identified in NAVSEA Drawing 8477552 Rev C. para 5.2.2.

3.4.3 The training curriculum shall provide the following modules:

1) CORE module.

2) Classroom lecture/demonstrates for all associated training modules.

3) Hands-on lab with qualified/approved fiber components and tools for all associated training modules

4) Lessons learned from Navy Shipboard Fiber Optics installations for all associated training modules. Lessons learned shall be provided or approved by the NSWCDD Fiber Optics Section.

5) Interfacing with non-fiber optic installation activities and the impact of their installations (e.g., Cable banding, cable routing, installations affecting access to FOCP boxes, etc.) for all associated training modules.

3.5 Travel Requirements

3.5.1 Items required to access Norfolk VA and San Diego CA training centers

1) Contractor shall provide Training course registration form.

2) Access to contractor training facilities.

3.5.2 Access to Govt installation

1) Names of personnel shall be given to government POC to enter into access portal.

2)

3.6 Cyber Security Requirements

The contractor shall ensure all Information Security users are appropriately trained in accordance with SECNAVINST 5239.20A, Department of the Navy Cyberspace Information Technology and Cybersecurity Workforce Management and Qualification, 10 February 2016, SECNAVINST 5239.3C, Department of the Navy Cybersecurity Policy, 02 May 2016, and DoD Instruction 8510.01, Risk Management Framework (RMF) for DoD Information Technology (IT), 12 March 2014, to fulfill cybersecurity responsibilities before allowing contractors access to systems or networks.

The contractor shall meet appointment, qualification and investigation requirements regarding cyber information technology and cybersecurity functions and report contractor personnel’s cybersecurity qualification status per Cybersecurity Data Element Standard in the OPM “Guide to Data Standards”, 9 July 2013. Unless expressly provided herein, all responsibility for training that is required for the contractor to maintain a specific expertise, commercial certification, or Continuous Learning is the sole responsibility of the contractor.

The contractor shall comply with all certification and training requirements of assigned Cyber IT/CSWF positions in accordance with DoDI 8140.01 Cyber Workforce Management, 11 August 2015 and SECNAV M-5239.2 Department of Navy Cybersecurity Workforce Management and Qualification Manual June 2016.

3.7 Contractor Information System Security Requirements and Cyber Incident Reporting The contractor shall encrypt all data at rest, as defined in NIST 800-53, Security Controls SC-13 and SC-28(1). The contractor shall segregate USN and RAN Controlled Unclassified Information (CUI) from contractor owned information when it is cost effective and feasible. Segregation can be implemented through logical isolation, physical isolation, a hybrid approach, or other technological process (approved by the PCO) to achieve required delivery of compromised data in the event of a cyber-incident.

The contractor shall audit user privilege on their information systems at least annually.

The contractor shall have the capability to send and receive encrypted emails; compatible with the Government systems.

The contractor shall allow the Naval Criminal Investigative Service (NCIS) to install network sensors, owned and maintained by NCIS, on the contractor's information systems or information technology assets when intelligence indicates a vulnerability or potential vulnerability.

Both routinely and in response to emergent developments, NCIS engages in outreach efforts to the defense contracting community to coordinate cybersecurity efforts. The contractor shall regularly monitor and engage with such efforts to ensure that contractor is aware of the most up-to-date cybersecurity information and strategies. As part of these efforts, the contractor shall consider implementing all recommendations from NCIS for additional hardening (e.g., more stringent configuration settings) of USN critical programs and technologies.

The contractor shall report all cyber incidents that affect any covered contractor information system or the covered defense information residing therein, or that affects the contractor’s ability to perform the requirements of this contract that are designated as operationally critical support and identified in the contract, as per DFAR clause 252.204-7012. Cyber incidents shall be reported to the Damage Assessment Management Office (DAMO), via the DIB-Net website (http://dibnet.dod.mil), within 72 hours and a copy of the report to the Defense Cyber Crime Center within 15 days.

4.0 Mishap Reporting/Safety & Environmental

Any unplanned or unexpected event or series of events resulting in damage to DOD property;

occupational illness or injury to on-duty military or civilian personnel; or damage to public or private property or injury or illness to non-DOD personnel caused by DOD operations.

requiring mishap investigation reports are incorporated into the contract to report all OH&S mishaps (injuries, near misses and or property damage) to the COR and OH&S Office within 48 hours of contractor mishap taking place. Must be reported to the RTA and Contracting Officer within 24 hours. CDRL A002

4. DATA DELIVERABLES

Data Deliverables shall be submitted to the government in accordance with Contract Data Requirements List (CDRL). An electronic copy of each data deliverable shall be submitted with each shipment.

CDRL TITLE DATA ITEM

DESCRIPTION (DID)

DELIVERY INFORMATION

A001 CERTIFICATE OF

COMPLIANCE

CERTIFICATION

CARD

Vendor to provide upon completion and sent to WXM Training Coordinator, John Thompson, 812-854-4203, john.c.thompson1.civ@us.navy.mil

A002 SAFETY

ASSESSMENT

REPORT

HAZARD

ASSESSMENT

QUESTIONAIRE

Vendor to provide evaluation of the safety risks being assumed prior to test or operation of the system or at contract completion as required. John Thompson, 812- 854-4203, john.c.thompson1.civ@us.navy.mil

SECTION E - INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for CLIN 0005:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

Destination Government Destination Government

The following Acceptance/Inspection Schedule was added for CLIN 0006:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

Destination Government Destination Government

SECTION F - DELIVERIES OR PERFORMANCE

The following Delivery Schedule item for CLIN 0001 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 07-JUL-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

N00164

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 21-AUG-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

The following Delivery Schedule item for CLIN 0002 has been changed from:

CAGE

POP 07-JUL-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

CAGE

POP 21-AUG-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

The following Delivery Schedule item for CLIN 0003 has been changed from:

CAGE

POP 07-JUL-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

CAGE

POP 21-AUG-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

The following Delivery Schedule item for CLIN 0004 has been changed from:

CAGE

POP 07-JUL-2023 TO

31-DEC-2023

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

CAGE

POP 21-AUG-2023 TO

31-AUG-2026

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

The following Delivery Schedule for CLIN 0005 has been added:

CAGE

POP 21-AUG-2023 TO

20-AUG-2026

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

The following Delivery Schedule for CLIN 0006 has been added:

CAGE

POP 21-AUG-2023 TO

20-AUG-2026

N/A NAVAL SURFACE WARFARE CENTER

CRANE DIV

M/F: JOHN THOMPSON (BLDG 3330S)

BLDG 41 SE CENTRAL RECEIVING

300 HWY 361

CRANE IN 47522-5001

812-854-4203

SECTION I - CONTRACT CLAUSES

The following have been added by reference:

52.222-49 Service Contract Labor Standards -- Place Of Performance

Unknown

MAY 2014

The following have been added by full text:

52.204-27 PROHIBITION ON A BYTEDANCE COVERED APPLICATION (JUN 2023)

(a) Definitions. As used in this clause--

Covered application means the social networking service TikTok or any successor application or service developed or provided by ByteDance Limited or an entity owned by ByteDance Limited.

Information technology, as defined in 40 U.S.C. 11101(6)--

(1) Means any equipment or interconnected system or subsystem of equipment, used in the automatic acquisition, storage, analysis, evaluation, manipulation, management, movement, control, display, switching, interchange, transmission, or reception of data or information by the executive agency, if the equipment is used by the executive agency directly or is used by a contractor under a contract with the executive agency that requires the use-

(i) Of that equipment; or

(ii) Of that equipment to a significant extent in the performance of a service or the furnishing of a product;

(2) Includes computers, ancillary equipment (including imaging peripherals, input, output, and storage devices necessary for security and surveillance), peripheral equipment designed to be controlled by the central processing unit of a computer, software, firmware and similar procedures, services (including support services), and related resources; but

(3) Does not include any equipment acquired by a Federal contractor incidental to a Federal contract.

(b) Prohibition. Section 102 of Division R of the Consolidated Appropriations Act, 2023 (Pub. L. 117-328), the No TikTok on Government Devices Act, and its implementing guidance under Office of Management and Budget (OMB) Memorandum M-23-13, dated February 27, 2023, "No TikTok on Government Devices" Implementation Guidance, collectively prohibit the presence or use of a covered application on executive agency information technology, including certain equipment used by Federal contractors. The Contractor is prohibited from having or using a covered application on any information technology owned or managed by the Government, or on any information technology used or provided by the Contractor under this contract, including equipment provided by the Contractor's employees; however, this prohibition does not apply if the Contracting Officer provides written notification to the Contractor that an exception has been granted in accordance with OMB Memorandum M-23-13.

(c) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts, including subcontracts for the acquisition of commercial products or commercial services.

(End of clause)

52.217-8 OPTION TO EXTEND SERVICES (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months. The Contracting Officer may exercise the option by written notice to the Contractor within 30 DAYS (insert the period of time within which the Contracting Officer may exercise the option).

CLIN 0006 OPTION #1

Option TERM OF USE:

QTY One (1) through One Hundred (100) Shall be no more than 100 This option 1 can be exercised multiple times Until total option QTY is met.

Effective date of award through 36 months

NTE 120,000.00

Vendor should not proceed with any options until a SF30 is signed and recieved by the Contracting Officer.

52.217-9 VAR I OPTION TO EXTEND THE TERM OF THE CONTRACT (MAR 2000) (NAVSEA VARIATION

I) (OCT 2018)

(a) The Government may extend the term of this contract by written notice to the Contractor within 60 DAYS (insert the period of time within which the Contracting Officer may exercise the option); provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 60 DAYS (60 days unless a different number of days is inserted) before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 36

MONTHS.

CLIN 0006 OPTION #1

Option TERM OF USE:

QTY One (1) through One Hundred (100) Shall be no more than 100 This option 1 can be exercised multiple times Until total option QTY is met.

Effective date of award through 36 months

NTE 120,000.00

Vendor should not proceed with any options until a SF30 is signed and recieved by the Contracting Officer.

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

The Table of Contents has changed from:

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Exhibit A CDRL A001 Certificate of Compliance

3 06-JUN-2023

Attachment 1 Drawings ND8477552

REVB

03-JAN-2019

to:

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Exhibit A CDRL A001 Certificate of Compliance

3 06-JUN-2023

Exhibit B CDRL A002 SAFETY

ASSESSMENT REPORT

15-JUN-2023

Attachment 1 NAVSEA DRAWING

8477552 REV C

11-SEP-2020

Attachment 2 WG 2015-5635 27-DEC-2022 Attachment 3 WD 2015-4821 30-JUN-2023 Attachment 4 WD 2015-4341 30-JUN-2023

SECTION K - REPRESENTATIONS, CERTIFICATIONS AND OTHER STATEMENTS OF OFFERORS

The following have been added by reference:

52.217-5 Evaluation Of Options JUL 1990

SECTION M - EVALUATION FACTORS FOR AWARD

The following have been modified:

ADDENDUM TO 52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

THE FOLLOWING BEST VALUE DETERMINATION IAW FAR 13 WILL BE USED TO

EVALUATE THE QUOTES USING LOW PRICE TECHNICALLY ACCEPTABLE

EVALUATION CRITERIA:

The Government intends to evaluate Request for Quotes IAW FAR 13 and award without discussion, but reserves the right to conduct discussions. Therefore, the offeror's initial Request For Quote should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the contracting officer to be necessary.

QUOTERS – PLEASE SEE THE FOLLOWING FOR EVALUATION CRITERIA

The following Best Value Factors listed will be used to evaluate the Quotes using Low Price Technically Acceptable Evaluation Criteria – GO/ACCEPTABLE – NO GO/UNACCEPTABLE Critiera:

TECHNICAL APPROACH

Proof of meeting all requirements for the Certified Fiber Optic Trainers List IAW NAVSEA DRAWING 8477552C and has received Notification of Certification from NAVSEA

DELIVERY

PAST PERFORMANCE

PRICE

Technical Acceptance Factor #1: TECHNICAL APPROACH Proof of meeting all requirements for the Certified Fiber Optic Trainers List IAW NAVSEA DRAWING 8477552 REV C and has received Notification of Certification from NAVSEA

Technical Acceptance Factor #2: DELIVERY

Quoters will need to fill out the clause 52.211-8 for evaluation by the Government. All vendors who can meet the Governments required delivery date will be deemed technically acceptable.

Technical Acceptance Factor #3: PAST PERFORMANCE

Past performance will be evaluated based on the below questionnaire. The contractor will need to complete the questionnaire in its entirety and provide all information.

Projects listed will need to be work that had been completed by the contractor for same/similar supplies/services within the past three years and can be either Government or Commercial contractors.

Past performance will be based on GO(Acceptable) /NO GO (Unacceptable) basis, evaluated strictly on the information provided on the questionnaire. An unacceptable (NO GO) equals the inability to have met any work listed on the questionnaire. A quoter with no past performance will be evaluated as neutral.

SEE TECHNICAL ACCEPTANCE EVALUATION MATRIX BELOW:

Quoter’s by checking a “GO” column you are certifying that your company meets technical acceptance evaluation factors. Matrix must be filled out for consideration of award.

TECHNICAL ACCEPTANCE

EVALUATION FACTOR

GO

(Acceptable)

NO GO

(Unacceptable)

IF YOU CAN EXCEED ANY TECHNICAL

ACCEPTANCE EVALUATION CRITERIA

PLEASE INDICATE HOW BELOW

TECHNICAL APPROACH

By checking GO in this box you are certifying you can provide the training as proven in the CFOTL Per NAVSEA Drawing 8477552 REV C

CONFORMANCE TO

DELIVERY

By checking GO in this box you are certifying that your company meets AND has FILLED OUT the Governments delivery schedule outline in FAR 52.211-8

CONFORMANCE TO PAST

HISTORY

By checking GO in this box you are certifying that your company meets all of the requirements. PLEASE SEE NOTE

PAST PERFORMANCE

QUESTIONNAIRE

A RESPONSIVE QUOTE CONSISTS OF THE FOLLOWING

SIGNED, DATED, FILLED OUT SF-1449 (ALL PAGES RETURNED)

52.211-8 TIME OF DELIVERY SF 1449 DELIVERY SCHEDULE FILLED OUT WITH QUOTERS

DELIVERY DATES

ALL PRICING MUST BE ENTERED ON EACH CLIN OF SOLICITATION.

COMPLIANCE MATRIX COMPLETELY FILLED OUT

TECHNICAL ACCEPTANCE MATRIX COMPLETELY FILLED OUT

PAST PERFORMANCE QUESTIONNAIRE COMPLETELY FILLED OUT -

ADDITIONAL DOCUMENTATION WILL BE ACCEPTED HOWEVER NO QUOTER

WILL BE CONSIDERED TECHNICALLY ACCEPTABLE WITHOUT THE ABOVE

MENTIONED DOCUMENTATION.

TO BE CONSIDERED TECHNICALLY ACCEPTABLE ALL QUOTERS MUST MEET

THE ABOVE CRITERIA. ONCE QUOTERS HAVE BEEN DEEMED TECHNICALLY

ACCEPTABLE, THEN AND ONLY THEN WILL PRICE BE EVALUATED.

Quotes that are non-compliant with any material requirement of this solicitation may be rejected without further consideration for award. This will be a firm fixed price contract and will be awarded utilizing Simplified Acquisition Procedures.

EXPERIENCE QUESTIONNAIRE

Instructions: Complete by inserting information or Xing box, as indicated. If extra space is needed to complete an item, use the remarks block (indicate item number in remarks block).

1. Contractor Name, Address, and Telephone Number DUNS Number:

CAGE Code:

2. Submitted to (Office Name & Address)

– Attn: KELSEY STRUNK NSWC Crane RE: Solicitation#N0016423Q0194

3. Business Company Partnership

Corporation Individual Non-profit Organization

4. How many years do you or your firm have in the line of work contemplated by this solicitation? Years

5. How many years experience in contracting have you or your business had as a (a) prime contractor and/or (b) sub-contractor for same/similar services.

6. List below the projects your business has completed within the last three years (continue on separate sheet if necessary):

Contract Amount

Type of Project Date Completed Name, Address, and Telephone No. of Owner/Person to Contract for Project Information

7. List below all of your firm’s contractual commitments running concurrently with the work contemplated by this solicitation (continue on separate sheet if necessary):

Contract Amount

Dollar Amt Of Award

Name, Address, and Telephone No. of Business/Government Agency Involved

Awarded (Units)

Percent Completed

Date Contract

Completed

8a. Have you ever failed to complete any work awarded to you? Yes No 8b. Has work ever been completed by performance bond? Yes No 8c. If “Yes” to either item 8a or 8b specify location(s) and reason(s) why (continue on separate sheet if necessary):

CERTIFICATION

I certify that all of the statements made by me are complete and correct to the best of my knowledge and that any persons named as references are authorized to furnish NSWC Crane with any information needed to verify my capability to perform this project.

9a.Certifying Official’s Name and Title

9b. Signature (Sign in Ink) 10. Date

(End of provision)

(End of Summary of Changes)