19RGP64_sol_0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The reason for this amendment is to remove P/N 2SWF-4 from the SOW Item table under section "3.1 General Requirements" in Section C and update CLINs 0007 and 0008 to better reference the applicable draw ings and specifications.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 6

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 20-Aug-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016419RGP64

X 9B. DATED (SEE ITEM 11)

19-Jul-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

20-Aug-2019

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

K. JACOBSEN (812-854-6343)

BLDG 3373

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016419RGP64

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

SUMMARY OF CHANGES

SECTION B - SUPPLIES OR SERVICES AND PRICES

CLIN 0007

The CLIN description has changed

FROM: First Article 53711-53X-06-153 2SWF-4

TO: First Article 2SWF-3, -4 Modified Cable

The CLIN extended description has changed

FROM: Modified Cable IAW Statement of Work and 53711-53X-06-153 Rev - & MIL-DTL-915/8. See specification for specific length required for FA testing. See below for pricing matrix.

TO: IAW Statement of Work and 53711-53X-06-153 Rev - & MIL-DTL-915/8. See specification for specific length required for FA testing. See below for pricing matrix.

CLIN 0008

The CLIN description has changed

FROM: 53711-53X-06-153 2SWF-4 Modified Cable

TO: 2SWF-3, -4 Modified Cable

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

Statement of Work For Outboard Submarine and Surface Ship

GXPS Raw Cables

1.0 Scope. This Statement of Work (SOW) sets forth the requirements for fabrication, assembly, inspection, testing and delivery of the manufacture of various raw cables listed in paragraph 3.0 below. This acquisition is necessary for Naval Surface Warfare Center (NSWC) Crane to complete tasking from Naval Supply Systems Command, Weapons System Support (NAVSUP WSS), Naval Sea Systems Command (NAVSEA) and Naval Underwater Warfare Center (NUWC) Newport in support of acoustic sensor equipment for surface ships and submarines.

2.0 Applicable Documents. The following documents form a part of the SOW to the extent specified within.

Drawings and Specifications Title

MIL-DTL-915 REV G Cable, Electrical, For Shipboard Use, General Specification For

MIL-DTL-915/8 REV H Cable, Power Electrical, 600 Volts, for Outboard Use Only (Not for Inboard Use), Types DSS, TSS, FSS and 7SS

MIL-DTL-915/48 REV D Cable, Special Purpose, Electrical, for Outboard Use Only (Not for Inboard Use), Type 2SWF

53711-53X-06-153 REV - Cable, 2SWF-3, -4 Modified

53711-7273879 REV B Cable, Electrical, Multi-Twisted, Shielded Pairs, 18

AWG

Multi-Twisted, Shielded Triad, 18 AWG for Submarine Outboard Use Only (Not for Inboard Use), Type TSPR

MIL-C-23020/4 REV A Cable, Coaxial (Submarine Use) Type RG-264C/U

MIL-DTL-23020 REV C Cable, Coaxial (For Submarine Use)

03538-77C721887 REV D Cable, Special Purpose, Electrical

53711-6396316 REV - Cable, Electrical Multiconductor

53711-5516428 REV A Cable, Electrical, 600 Volts, Type DSU-2

3.0 Requirements.

3.1 General Requirements. The contractor shall provide the necessary equipment, facilities, resources, management and labor by qualified personnel to fabricate, assemble, inspect, test and deliver the items identified in the table below.

SOW

ITEM #

DRAWING/PART # DESCRIPTION

1 P/N DSS‐3 Cable, Power Electrical per MIL‐DTL‐915/8

2 P/N FSS‐2 Cable, Power Electrical per MIL‐DTL‐915/8

3 P/N 2SWF‐3 Cable, Special Purpose, Electrical per MIL‐DTL‐915/48

4 DRWG 53711‐53X‐06‐153 Cable, 2SWF‐3, ‐4 Modified (200 foot lengths)

5 P/N 2SWF‐24 Cable, Special Purpose, Electrical per MIL‐DTL‐915/48

6 DRWG 53711‐7273879 Cable, Electrical per 53711‐7273879

7 DRWG 03538‐77C721887 Cable, Electrical per 03538‐77C721887 (80 foot lengths)

8 P/N DSS‐2 Cable, Power Electrical per MIL‐DTL‐915/8

9 DRWG 53711‐6396316 Cable, Electrical Multiconductor (37 foot lengths)

10 DRWG 53711‐5516428 Cable, Electrical, 600 Volts, Type DSU‐2

11 P/N RG‐264 C/U Cable, Electrical per MIL‐C‐23020/4 (200 foot lengths)

3.1.1. General Requirements Additional Information. Items 1 through 3, 5 and 8 are all neoprene jacketed MIL-DTL-915 type cables. Items 4, 6, 7, 9, and 10 are build-to-print cables defined by the applicable drawings and specifications. Item 11 is a RG-264 C/U cable per MIL-DTL-23020 except hydro leakage to be 1 gallon max. Items 4 and 11 are required to be supplied in 200 ft. useable multiples. Item 7 is required to be supplied in 80 ft. useable multiples. Item 9 is required to be supplied in 37 ft. useable multiples.

3.2 Testing. The contractor shall test and evaluate cables in accordance with the applicable documents listed in Section 2. The Government may monitor any and all tests and evaluations, first article testing performed by the contractor, subcontractors and vendors.

3.2.1 First Article Testing. The contractor shall perform first article testing as specified in the appropriate specification(s)/drawings. In lieu of performing first article testing, the contractor may submit proof of previous successful first article testing and/or qualification letter confirming successful first article testing. The Government reserves the right to waive the requirements for samples for first article inspection to offerors proposing a product which has been previously acquired or tested by the Government.

3.2.1.1 First Article Test Plan. If the contractor is required to perform first article testing, the contractor shall submit a First Article Test Plan to the Government for review and approval. No changes will be made to any of the testing and evaluation processes, procedures or plans without the approval of the Government. (CDRL A001)

3.2.2 Inspection/Testing. Each cable shall be inspected for defects, manufacturing flaws and compliance with applicable drawings and specifications including dimensions. An inspection report documenting specific inspections and results is required. Each cable shall be tested to verify compliance with electrical and hydrostatic requirements in applicable drawings and specifications. The contractor shall submit a test report documenting specific tests and results (CDRL A002).

3.2.3 Final Inspection. The contractor shall conduct final inspection including electrical and hydrostatic pressure testing and compliance to applicable drawings and specifications.

Final inspection data shall be recorded and submitted to the Government on the Certificate of Conformance (CDRL A003).

3.2.4 Counterfeit Parts and Material.

Counterfeit materiel is a serious threat to the safety and operational effectiveness of DoD systems. The Contractor (and subcontractors at all tiers) shall implement a risk mitigation process when obtaining critical or high risk materiel in accordance with paragraphs (a) and

(b) below:

(a) If the materiel is currently in production or currently available, the materiel shall be obtained only from authorized sources. Authorized sources are the original manufacturer, a source with the express written authority of the original manufacturer or current design activity, or an authorized aftermarket manufacturer.

(b) If the materiel is not in production or currently available from authorized sources, the materiel shall be obtained from suppliers that meet appropriate counterfeit avoidance criteria. Counterfeit avoidance criteria can be found in the following Industry Standards - SAE AS5553A; SAE AS6462; SAE AS6081; SAE ARP6178; SAE AS6174A; and SAE

AS6301.

Contractors shall notify the contracting officer when critical or high risk materiel cannot be obtained from an authorized source. The contractor shall take mitigating actions to authenticate the materiel if purchased from another source.

The contractor shall report instances of counterfeit and suspect counterfeit materiel to the Contracting Officer and the Government-Industry Data Exchange Program (GIDEP) as soon as the contractor becomes aware of the issue.

4.0 Government Furnished Items. The Government shall provide the following items to accomplish the tasking in this SOW.

4.1 Government Furnished Information (GFI): As identified in the Applicable Documents section, paragraph 2.0, above.

4.2 Government Furnished Material (GFM): N/A

4.3 Government Furnished Equipment (GFE): N/A

5.0 Data Deliverables. Data Deliverables shall be submitted to the Government in accordance with Contract Data Requirements List (CDRL).

6.0 Special Considerations

6.1 Security Classification. Tasking under this Statement of Work is unclassified.

6.2 Information Non-Disclosure. The Contractor shall not disclose any information provided or developed under this contract outside the Government without prior approval. All technical data provided to the Contractor as GFI shall be protected in accordance with the Distribution Statement included on each document. In the event of a drawing omitting a distribution statement, Distribution Statement D, which follows in full, shall apply: “Distribution Statement D: Distribution authorized to Department of Defense and U.S. DoD contractors only for administrative or operational use (November 2009). Other request shall be referred to NSWC Crane, Code GXP.”

(End of text)

(End of Summary of Changes)