15RJR42_att.doc

STATEMENT OF WORK

FOR THE

PURCHASE OF REPLACEMENT X-RAY IMAGING EQUIPMENT WITH INTEGRATED IMAGE CAPTURE SOFTWARE AND HARDWARE

JANUARY 15, 2015

NAVAL SURFACE WARFARE CENTER, CRANE DIVISION

SPECIALIZED MUNITIONS DIVISION

MUNITIONS SERVICES BRANCH

MATERIALS ANALYSIS (X-RAY) SECTION

(CODE JXRMM)

CRANE, INDIANA 47522-5001

Distribution Statement A. Approved for public release; distribution is unlimited.

DESTRUCTION NOTICE. For classified documents, follow the procedures in DoD 5200.22-M, Industrial Security Manual, Section II-19 or DoD 5200.1R, Information Security Program Regulation, Chapter IX. For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

Record of Changes

STATEMENT OF WORK

FOR THE

PURCHASE OF REPLACEMENT X-RAY IMAGING EQUIPMENT WITH INTEGRATED IMAGE CAPTURE SOFTWARE AND HARDWARE

1.0 Scope.

This Statement of Work (SOW) describes the replacement X-Ray imaging equipment needed.

1.1 Background.

Specialized Munitions Division (JXR), Munitions Services Branch (JXRM), Material Analysis Section (JXRMM) has a requirement to replace a failed X-Ray imaging detector currently used for the production of clear images for testing. The current X-Ray imaging system encountered a breakdown which could not be repaired.

2.0 Applicable Documents.

The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. In the event of conflict between the documents referenced herein and the contents of this SOW, the contents of this SOW shall prevail.

2.1 Government Documents.

2.2 Other Publications and Regulations

ISO 9001:2008

Quality Management Systems - Requirements

2.3 Availability of DOD Documents.

Government specifications, standards and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094. Non-Government Publications are available from the National Standards Institute, 11 West 42nd Street, New York, NY 10036. The Code of Federal Regulations can be accessed at http://www.gpoaccess.gov/cfr/index.html.

3.0 Requirements.

The quote shall be provided to NSWC Crane and shall be used as the basis for the final contract.

PERKIN ELMER XRD 1621 AN 3 ES SERIES DIGITAL FLAT PANEL DETECTOR

The contractor shall deliver to the RTA for approval one Perkin Elmer XRD 1621 AN 3 ES series Digital Flat Panel detector to include the following:

1. Monolithic flat panel

2. 200 micron pitch

3. Cesium Scintillator Screen

4. 15 frames per second at full resolution. 30 frames per seconds at 2x2 binning

5. Total area: 16” x 16” (409.6mm x 409.6mm)

6. Fiber optic interface

7. 2048 x 2048 pixels

8. 200 pixel pitch

9. 16 bit resolution (65.536 grey levels)

10. Ultra high sensitivity

11. 40 keV-15 MeV

12. Premium CT Grade (best quality)

WORKSTATION AND SOFTWARE

The contractor shall deliver to the RTA for approval an efX-DR Workstation and efX-DR Software:

efX-DR Workstations

1. Windows 7

2. Six-Core Intel Xeon Processor

3. 4 GB RAM

4. 3TB of Data Storage in RAID 0 Configuration

5. DVD+/-RW Drive

6. 10/100/1000 Network Interface

7. NVidia High Performance Display Adaptor

8. 30” (76cm) 4 Mega Pixel Color Display

9. Wireless Keyboard and Mouse efX-DR Software

1. Windows based

2. Non-proprietary image storage format

3. Multiple Windows interface

4. High performance image processing and measurement functions utilizing GPU technology

5. Live Imaging up to 30 frames per second

6. Live Averaging, Live Histogram, Live line Profile, Live Rotation between portrait and landscape modes

7. Live Measurements with 1 pixel resolution

8. Live image gain/offset calibration and defective pixel correction

9. Automatic creation of Technique sheet for operator record

10. Capture video into AVI files

11. Supports digital flat panel detectors, LDA’s and digital/analog cameras at 8, 10, 12, and 16 bits

12. Read and store images in TIFF 32 bit / 16 bit / 8 bit, BMP, JPEG, RAW

13. Seamless integration with efX-CT software

14. Integration of x-ray control via existing MGC41 controller through efX-DR

SOFTWARE License

The contractor shall deliver to the RTA for approval X-View Detector Qualification Software License:

1. Pixel Mapping Qualification

2. Detector Quality Check

3. Spatial Resolution

4. Contrast Sensitivity Check

5. SMPTE Display Test Pattern

6. ASTM 2737

7. ASTM 2597

8. BSS 2597

9. Spatial resolution gauge

10. Light meter

3.1 Quality.

The contractor shall have an established quality system that ensures conformance to contractual requirements and meets the requirements of ISO 9001:2008, or an equivalent quality system model during performance of this contract.

3.2 Installation

Contractor shall perform installation with factory trained personnel to ensure compliance with radiation safety standards. Installations will be in an existing x-ray cell. Delivery of equipment will be FOB Origin, Rogers, MN. Crane will be responsible for movement of equipment from the receiving area to the installation site. Crane will also be responsible for power and air requirements specified by the vendor.

3.3 Training

Contractor shall send one qualified technical personnel to train six NSWC Crane employees on the use of the equipment and software directly after installation. Training shall occur in Building 2987 with an estimated time of one work day.

3.4 Finishes, Markings and Decals.

All system buttons, switches, adjusters, etc shall be clearly labeled to indicate their function.

3.5 Packing, Packaging, and Labeling.

The contractor shall ensure that each hardware item delivered shall be clean, preserved, packed, packaged, labeled and marked in accordance with industry’s standard commercial practices for appropriate outer-container delivery identification and to protect them from contamination and damage. The contractor shall ensure the assemblies, when packed, will be capable of being transported on standard transportation systems, by either commercial or military carriers.

4.0 Shipping Address.

The contractor shall ship the assemblies to the address below unless otherwise noted in the Delivery Order.

NSWC, Crane Division Attn: Samuel Kearby

Materials Analysis (X-ray) Section (CODE JXRMM)

300 Hwy 31, BLDG 2987 Crane, IN 47522-5001

5.0 Special Considerations.

Technical Point of Contact

Samuel Kearby NSWC, Crane Division Materials Analysis Section (CODE JXRMM)

300 Hwy 31, BLDG 2987 Crane, IN 47522-5001

(812) 854-1478 samuel.kearby@navy.mil

6.0 Period of Performance.

Period of Performance shall be delivery and installation within 60 to 90 days of contract award.

7.0 Place of Performance.

Place of Performance shall be at NSWC Crane, Building 2987 for the installation and training components outlined in this SOW.