14RWM58_0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The above referenced solicitation is hereby amended to remove clause HQ C-2-0009 and to update the Statement of Work. Proposal due date remains 14 July 2014 at 12:00PM ET.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 08-Jul-2014

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00164-14-R-WM58

X 9B. DATED (SEE ITEM 11)

13-Jun-2014

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

08-Jul-2014

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

J. SHEPHERD (812-854-3860)

BLDG 121

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00164-14-R-WM58

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

STATEMENT OF WORK

STATEMENT OF WORK (SOW)

FOR THE

ROCKWELL COLLINS TUNER,

MODEL NUMBER CS-5020C, PART NUMBER (P/N) 70395-43

1 SCOPE

This SOW sets forth the requirements for the contractor to produce and test the Rockwell Collins High Performance Microwave Tuner, Model Number CS-5020C, P/N 70395-43, which is a component of the Specific Emitter Identification (SEI) System. This tuner will be used by the organic depot and NAVICP to support refurbishment and restoration of SEI systems used on ships in the United States Navy (USN) and United States Coast Guard (USCG), among those the DDG, CG, LHD, and LPD classes. The CS-5020C P/N 70395-43 tuner is made for the SEI system, a subsystem of both the AN/SSX-1 and AN/SLQ-32 Systems, and allows the USN and USCG ships to track threats, such as ships, planes and missiles. Efforts will include production and test of the tuner, as well as associated test data collection.

2 APPLICABLE DOCUMENTS

The following documents shall be used in the performance of this contract. If there is a conflict between the SOW and the document listed, the SOW shall take precedence.

2.1 Department of Defense Handbook

MIL-HDBK-831 27 Jan 2004 Preparation of Test Reports Notice 1

2.2 Other Government Documents

Naval Sea Systems Command Drawing

7118475A 1 May 2004 Tuner Assembly, Radio Frequency

2.3 Rockwell Collins Acceptance Test Procedure (ATP)

818-3285-003 Rev D Final ATP CS-5020 PN 70395-43

3 REQUIREMENTS

3.1 General Requirements. The contractor shall provide all resources (i.e. labor and materials) to fabricate and test the Tuners, Model CS-5020C, P/N 70395-43. The Communications Intelligence/Electronics Intelligence applications shall be SEI certified. The receiver shall have a 2U, half rack chassis.

3.2 Drawing Package. Drawing 7118475A is an altered item drawing and only references the cage code, P/N and Unique Identifier label marking location. There are no other requirements listed on the drawing.

3.3 Contractor Test Requirements. The tuner shall be tested in accordance with ATP 818-3285-003D in order to conform to the form, fit and function requirements as listed for the Tuner, Model CS-5020C, P/N 70395-43.

3.4 Contractor shall assign serial numbers via its standard process and procedure.

3.5 Efforts required to accomplish the above objectives shall be in accordance with the contractor’s industrial shop methods (i.e., ISO-9000) and procedures with Rockwell Collins tools and test equipment.

3.6 Test Reports. The contractor shall prepare a test report in accordance with the latest revision of MIL- HDBK-831 when the qualification test is performed. The test report shall be submitted to NSWC Crane Division in accordance with Contract Data Requirements List A001.

3.7 Acceptance Testing. Acceptance testing will be conducted by the Government at NSWC Crane Division.

The Government will retain the authority to conduct any test necessary to insure compliance with the applicable specifications.

3.8 A Material Inspection and Receiving Report (DD250) shall be packed and shipped with items delivered under this contract. One copy of the DD250 shall be forwarded to the Requiring Technical Activity, Scott Titzer at scott.titzer@navy.mil.

3.9 Packaging, Handling, Storage and Transportation. The contractor shall ensure that when hardware is packaged, it is capable of being shipped on standard commercial or military transportation systems. The contractor shall also ensure that the tuners are in shipping containers that will not incur physical damage or degradation of performance during transportation modes. This includes commercial air, truck and all types of USN cargo.

4 TRAVEL

Travel is not required under this contract.

5 SECURITY

All work performed under this contract shall be UNCLASSIFIED.

The following have been deleted:

HQ-C-2-0009 ASSIGNMENT OF SERIAL NUMBER(S) (NAVSEA) (SEP

1990)

JUN 2008

SECTION I - CONTRACT CLAUSES

The following have been modified:

52.216-19 ORDER LIMITATIONS. (OCT 1995)

(a) Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than 5 units per year, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

(b) Maximum order. The Contractor is not obligated to honor:

(1) Any order for a single item in excess of 75 ;

(2) Any order for a combination of items in excess of 75 ; or

(3) A series of orders from the same ordering office within 15days that together call for quantities exceeding the limitation in subparagraph (1) or (2) above.

(c) If this is a requirements contract (i.e., includes the Requirements clause at subsection 52.216-21 of the Federal Acquisition Regulation (FAR)), the Government is not required to order a part of any one requirement from the Contractor if that requirement exceeds the maximum-order limitations in paragraph (b) above.

(d) Notwithstanding paragraphs (b) and (c) above, the Contractor shall honor any order exceeding the maximum order limitations in paragraph (b), unless that order (or orders) is returned to the ordering office within 15days after issuance, with written notice stating the Contractor's intent not to ship the item (or items) called for and the reasons.

Upon receiving this notice, the Government may acquire the supplies or services from another source.

(End of clause)

(End of Summary of Changes)