13T0300_sol.pdf

NAVAL SURFACE WARFARE CENTER CRANE DIV

JONATHAN BRIGHT

BLDG 3330 S CODE WXMR

300 HIGHWAY 361

CRANE IN 47522-5001

TEL: 812-854-4273 FAX:

REQUEST FOR QUOTATIONS

(THIS IS NOT AN ORDER) 1

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED RATING

A7N00164-13-T-0300 17-Sep-2013 5a. ISSUED BY

8. TO: NAME AND ADDRESS, INCLUDING ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this

Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State, and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e) (f)

SEE SCHEDULE

AMOUNT

% No. %

NOTE: Additional provisions and representations [ ] are [ ] are not attached.

13. NAME AND ADDRESS OF QUOTER (Street, City, County, State, and ZIP Code)

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

15. DATE OF

QUOTATION

16. NAME AND TITLE OF SIGNER (Type or print) (Include area code)

TELEPHONE NO.

AUTHORIZED FOR LOCAL REPRODUCTION STANDARD FORM 18 (REV. 6-95)

PREVIOUS EDITION NOT USABLE Prescribed by GSA FAR (48 CFR) 53.215-1(a)

THIS RFQ [ ] IS X[ ] IS NOT A SMALL BUSINESS SET-ASIDE

6. DELIVER BY (Date)

SEE SCHEDULE

AND/OR DMS REG. 1

UNDER BDSA REG. 2

4. CERT. FOR NAT. DEF.3. REQUISITION/PURCHASE

REQUEST NO.

NAVAL SURFACE WARFARE CENTER CRANE DIV

P. HOGGATT (812-854-3688) BLG. 64

300 HIGHWAY 361

CRANE IN 47522-5001

9. DESTINATION (Consignee and address, including ZIP Code)

7. DELIVERY

[ ]X FOB

DESTINATION

[ ] OTHER

(See Schedule)

26-Sep-2013(Date)

PLEASE FURNISH QUOTATIONS TO THE ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS:10.

812-854-3688PHYLLIS HOGGATT

(Name and Telephone no.) (No collect calls)5b. FOR INFORMATION CALL:

d. CALENDAR DAYSc. 30 CALENDAR DAYSb. 20 CALENDAR DAYS12. DISCOUNT FOR PROMPT PAYMENT a. 10 CALENDAR DAYS

N00164-13-T-0300

Section SAP - SAP Continuation Sheet

ITEM NO SUPPLIES/SERVICES QTY U/I UNIT PRICE AMOUNT

0001 Production of Dual Notch YIG Filters

YIG Tuned Dual Notch Filters IAW SOW & attached drawings G277054 Rev U, and 574908.

Contractor shall furnish all labor, materials, supplies, tools, equipment, supv. and transportation, FOB Destination, Crane, IN 47522.

17 Each

FSC/PSC: 6320

FOB: Destination

FFP

0002 First Article Testing

For YIG Filter IAW SOW & drawings.

The government may waive the requirement for First Article Approval Test where supplies identical to those called for in accordance with the SOW and drawing have been previously furnished by the vendor and have been accepted by the government.

The vendor may request a waiver. To request a waiver the government requires past government contract award numbers and Contracting Officer's point of contact (POC) for provided contract award numbers and/or government POC for proof of successful FAT by the government.

If the government waives the FAT then CLIN 0001 production is 17.

If the FAT is conducted the government will be conducting the testing at the contractor's facility for a quantity of (1-3). Inspection will be performed by the government. Final Inspection and Acceptance will be at Destination. Reference SOW,performance specification section 8.5 & 8.6 of drawing.

CLIN 0002 FAT, shall be delivered within 120 days after contract award. FAT quantity of (1-

3) will be considered part of the production quantity.

1 Lot

0003 CDRLs

A001 thru A006 shall be provided as an attachment to this CLIN and be NSP.

1 Lot

SOW

Statement of Work (SOW) For

AN/SLQ-32 Filter, Band Suppression – Dual Notch, Tunable (YIG) Fabrication Contract

1.0 SCOPE

This Statement of Work defines the requirements for A Yttrium Iron Garnet (YIG) filter.

2.0 APPLICABLE DOCUMENTS

2.1 The following documents shall be used in the development and fabrication and testing of the Filter. If there is a conflict between the SOW and documents listed, the SOW takes precedence.

LATEST DRAWING PACKAGE INFORMATION

DRAWING NUMBER NOMENCLATURE Rev NOR Pending

G277054 FILTER, BAND SUPPRESSION-

YIG TUNED, DUAL NOTCH

Source Control Drawing

U N/A

Raytheon Drawing 574908 (Declassified)

DTP Frequency Codes C N/A

2.1.2 The contractor is to manufacture the filters in order to meet the requirements called out in the document listed in Section 3.

2.1.3 All references to First article testing and Qualification (Environmental) Testing are applicable to the three first article units. Of these first article units, as a minimum requirement, one unit shall be subjected to the Qualification testing as described in paragraph 8.6 of the specification (G277054). The remainder of the First Article units will undergo testing as specified in paragraph 8.5 of the specification.

2.1.4 Table 1 (Sheet 6) references Raytheon drawing 574908. The drawing will be provided. For initial design purposes the operational frequency range of the filter is between 6 GHz and 18 GHz. The frequencies referenced on Table 1 (Sheet 6) are subset of this range. Note: This drawing has been DECLASSIFIED.

2.1.5 In the following paragraphs of the Source Control Drawing, G277054, all occurrences of the phrase, “Raytheon ESD/(RESD)” shall be read as, “NSWC Crane”:

4.9, 4.10, 4.24, 8.1, 8.2, 8.7.2, 8.8.2, 8.9.1, 8.9.2, 8.9.3,

2.1.6 Paragraph 8.10 of the Source Control Drawing, G277054, is deleted without replacement for this contract.

3.0 REQUIREMENTS

3.1 General Requirements – The Contractor shall provide all resources (i.e. drawings, labor, materials, jigs and fixtures, special test equipment/tooling, test procedures and data sheets) to fabricate and test up to 20 production Filter units in order to meet to the drawing requirements listed above. (Actual quantity to be determined by requirement stated in the RFQ and responding Vendor Quote.)

3.1.1The Contractor shall manufacture and test up to 20 (Qty) production units and 1-3 first article units of the AN/SLQ-32 Dual Notch Tunable Filters. Technology is not required for these units but may be used if necessary.

These filters must be designed to be repairable by the contractor to support the fleet.

3.1.2 The filter can remove two independently tuned frequencies within a specified suppression (notch) bandwidth.

Each frequency is selected in response to a TTL selection code sent to connector J3. An OFF position shall be provided via TTL selection code. The Radio Frequency (RF) signal path is into connector J1 and out of connector J2.

3.2 HARDWARE:

3.2.1 Filter - This Filter shall be manufactured and tested in accordance with the Form, Fit, and Function requirements as listed under source control drawing P/N G277054. This filter has the additional requirement that it is to be designed to be repairable by the contractor.

3.3 ACCEPTANCE TESTING

3.3.1 DCMA – DCMA will be verifying the First Article Qualification Testing and acceptance testing at the Contractors location.

5.4.2 Final Acceptance – Final Acceptance of First Article(s) and production units will be at NSWC, Crane with full-up system testing and QA approval.

3.4 PACKAGING, HANDLING, STORAGE AND TRANSPORTATION

3.4.1 The Contractor shall ensure that when hardware is packaged, it is capable of being shipped on standard commercial or military transportation systems. The contractor shall also ensure that the filters are in shipping containers that will not incur physical damage or degradation of performance during transportation modes. This includes commercial air, truck, and all types of Navy cargo.

3.5 SECURITY REQUIREMENTS.

3.5.1 Work performed under this contract is UNCLASSIFIED. No DD254 is required.

4.0 Contract Data Requirement List (CDRLs)

The contractor shall provide the following deliverables in accordance with the CDRL requirements:

Data Description CDRL- Data Sequence Number Data Item Description Number Qualification/First Article Test Procedure A001 DI-MISC-80508B Qualification Test Report A002 DI-MISC-80508B Reliability Prediction A003 DI-MISC-80508B Acceptance Procedure A004 DI-MISC-80508B

Outline Drawing A005 DI-MISC-80508B Certification of Parts A006 DI-MISC-80508B

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 4 mths. ADC 17 NAVAL SURFACE WARFARE CENTER

CRANE DIV

JONATHAN BRIGHT

BLDG 3330 S CODE WXMR

300 HIGHWAY 361

CRANE IN 47522-5001

812-854-4273

N00164

0002 4 mths. ADC 1 (SAME AS PREVIOUS LOCATION)

0003 4 mths. ADC 1 (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-12 Data Universal Numbering System Number Maintenance DEC 2012 52.204-13 System for Award Management Maintenance JUL 2013 52.209-10 Prohibition on Contracting With Inverted Domestic

Corporations

MAY 2012

52.211-5 Material Requirements AUG 2000 52.211-15 Defense Priority And Allocation Requirements APR 2008

52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns

JAN 2011

52.219-28 Post-Award Small Business Program Rerepresentation JUL 2013 52.223-18 Encouraging Contractor Policies To Ban Text Messaging

While Driving

AUG 2011

52.232-23 Assignment Of Claims JAN 1986 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.233-4 Applicable Law for Breach of Contract Claim OCT 2004 52.242-17 Government Delay Of Work APR 1984 52.243-1 Changes--Fixed Price AUG 1987 52.246-1 Contractor Inspection Requirements APR 1984 52.249-1 Termination For Convenience Of The Government (Fixed

Price) (Short Form)

APR 1984

252.203-7000 Requirements Relating to Compensation of Former DoD Officials

SEP 2011

252.204-7003 Control Of Government Personnel Work Product APR 1992 252.211-7003 Item Identification and Valuation JUN 2013 252.223-7008 Prohibition of Hexavalent Chromium JUN 2013 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2012 252.225-7021 Trade Agreements AUG 2013 252.225-7036 Buy American--Free Trade Agreement--Balance of Payments

Program

DEC 2012

252.225-7048 Export-Controlled Items JUN 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

JUN 2012

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

JUN 2012

252.243-7001 Pricing Of Contract Modifications DEC 1991

CLAUSES INCORPORATED BY FULL TEXT

52.209-4 FIRST ARTICLE APPROVAL--GOVERNMENT TESTING (SEP 1989) - ALTERNATE I (JAN 1997)

(Contracting Officer shall insert details)

(a) The Contractor shall deliver 3 unit(s) of Lot/Item 0001 within 120 calendar days from the date of this contract to the Government at Jonathon Bright, 300 HW 361, Crane, IN 47501 for first article tests. The shipping documentation shall contain this contract number and the Lot/Item identification. The characteristics that the first article must meet and the testing requirements are specified elsewhere in this contract.

(b) Within 30 calendar days after the Government receives the first article, the Contracting Officer shall notify the Contractor, in writing, of the conditional approval, approval, or disapproval of the first article. The notice of conditional approval or approval shall not relieve the Contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the Contractor. A notice of disapproval shall cite reasons for the disapproval.

(c) If the first article is disapproved, the Contractor, upon Government request, shall submit an additional first article for testing. After each request, the Contractor shall make any necessary changes, modifications, or repairs to the first article or select another first article for testing. All costs related to these tests are to be borne by the Contractor, including any and all costs for additional tests following a disapproval. The Contractor shall furnish any additional first article to the Government under the terms and conditions and within the time specified by the Government. The Government shall act on this first article within the time limit specified in paragraph (b) of this clause. The

Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any additional costs to the Government related to these tests.

(d) If the Contractor fails to deliver any first article on time, or the Contracting Officer disapproves any first article, the Contractor shall be deemed to have failed to make delivery within the meaning of the Default clause of this contract.

(e) Unless otherwise provided in the contract, the Contractor--

(1) May deliver the approved first article as a part of the contract quantity, provided it meets all contract requirements for acceptance and was not consumed or destroyed in testing; and

(2) Shall remove and dispose of any first article from the Government test facility at the Contractor's expense.

(f) If the Government does not act within the time specified in paragraphs (b) or (c) of this clause, the Contracting Officer shall, upon timely written request from the Contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates and/or the contract price, and any other contractual term affected by the delay.

(g) The Contractor is responsible for providing operating and maintenance instructions, spare parts support, and repair of the first article during any first article test.

(h) Before first article approval, the acquisition of materials or components for, or the commencement of production of, the balance of the contract quantity is at the sole risk of the Contractor. Before first article approval, the costs thereof shall not be allocable to this contract for (1) progress payments, or (2) termination settlements if the contract is terminated for the convenience of the Government.

(i) The Government may waive the requirement for first article approval test where supplies identical or similar to those called for in the schedule have been previously furnished by the Offeror/Contractor and have been accepted by the Government. The Offeror/Contractor may request a waiver.

(j) The Contractor shall produce both the first article and the production quantity at the same facility.

(End of clause)

52.213-4 TERMS AND CONDITIONS--SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL

ITEMS) (JULY 2013)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses that are incorporated by reference:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

(ii) 52.222-21, Prohibition of Segregated Facilities (Feb 1999) (E.O. 11246).

(iii) 52.222-26, Equal Opportunity (MAR 2007) (E.O. 11246).

(iv) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

(v) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2006) (E.o.s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

(vi) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(vii) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Pub. L. 108-77, 108-78).

(2) Listed below are additional clauses that apply:

(i) 52.232-1, Payments (Apr 1984).

(ii) 52.232-8, Discounts for Prompt Payment (Feb 2002).

(iii) 52.232-11, Extras (Apr 1984).

(iv) 52.232-25, Prompt Payment (July 2013).

(v) 52.233-1, Disputes (JUN 2008).

(vi) 52.244-6, Subcontracts for Commercial Items (July 2013).

(vii) 52.253-1, Computer Generated Forms (Jan 1991).

(viii) 52.232-39, Unenforceability of Unauthorized Obligations (JUN 2013).

(b) The Contractor shall comply with the following FAR clauses, incorporated by reference, unless the circumstances do not apply:

(1) The clauses listed below implement provisions of law or Executive order:

(i) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note) (Applies to contracts valued at $25,000 or more).

(ii) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (MAR 2012) (E.O. 13126). (Applies to contracts for supplies exceeding the micro-purchase threshold.)

(iii) 52.222-20, Walsh-Healey Public Contracts Act (OCT 2010) (41 U.S.C. 35-45) (Applies to supply contracts over $15,000 in the United States, Puerto Rico, or the U.S. Virgin Islands).

(iv) 52.222-35, Equal Opportunity for Veterans (SEP 2010) (38 U.S.C. 4212) (applies to contracts of $100,000 or more).

(v) 52.222-36, Affirmative Action for Workers with Disabilities (OCT 2010) (29 U.S.C. 793). (Applies to contracts over $15,000, unless the work is to be performed outside the United States by employees recruited outside the United States.) (For purposes of this clause, United States includes the 50 States, the District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, and Wake Island.)

(vi) 52.222-37, Employment Reports on Veterans (SEP 2010) (38 U.S.C. 4212) (applies to contracts of $100,000 or more).

(vii) 52.222-41, Service Contract Act of 1965 (Nov 2007) (41 U.S.C. 351, et seq.) (Applies to service contracts over $2,500 that are subject to the Service Contract Act and will be performed in the United States, District of Columbia, Puerto Rico, the Northern Mariana Islands, American Samoa, Guam, the U.S. Virgin Islands, Johnston Island, Wake Island, or the outer continental shelf lands.).

(viii) 52.223-5, Pollution Prevention and Right-to-Know Information (May 2011) (E.O. 13423) (Applies to services performed on Federal facilities).

(ix) 52.223-15, Energy Efficiency in Energy-Consuming Products (DEC 2007) (42 U.S.C. 8259b) (Unless exempt pursuant to 23.204, applies to contracts when energy-consuming products listed in the ENERGY STAR Program or Federal Energy Management Program (FEMP) will be--

(A) Delivered;

(B) Acquired by the Contractor for use in performing services at a Federally-controlled facility;

(C) Furnished by the Contractor for use by the Government; or

(D)Specified in the design of a building or work, or incorporated during its construction, renovation,or maintenance.)

(x) 52.225-1, Buy American Act--Supplies (FEB 2009) (41 U.S.C. 10a-10d) (Applies to contracts for supplies, and to contracts for services involving the furnishing of supplies, for use in the United States or its outlying areas, if the value of the supply contract or supply portion of a service contract exceeds the micro-purchase threshold and the acquisition--

(A) Is set aside for small business concerns; or

(B) Cannot be set aside for small business concerns (see 19.502-2), and does not exceed $25,000.)

(xi) 52.232-33, Payment by Electronic Funds Transfer--System for Award Management (Jul 2013). (Applies when the payment will be made by electronic funds transfer (EFT) and the payment office uses the System for Award Management (SAM) database as its source of EFT information.)

(xii) 52.232-34, Payment by Electronic Funds Transfer--Other than System for Award Management (Jul 2013).

(Applies when the payment will be made by EFT and the payment office does not use the SAM database as its source of EFT information.)

(xiii) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (FEB 2006) (46 U.S.C. Appx 1241). (Applies to supplies transported by ocean vessels (except for the types of subcontracts listed at 47.504(d).)

(2) Listed below are additional clauses that may apply:

(i) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Jul 2013) (Applies to contracts over $30,000).

(ii) 52.211-17, Delivery of Excess Quantities (SEPT 1989) (Applies to fixed-price supplies).

(iii) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (MAR 2009) (Pub. L. 110-247) (Applies to contracts greater than $25,000 that provide for the provision, the service, or the sale of food in the United States.)

(iv) 52.247-29, F.o.b. Origin (FEB 2006) (Applies to supplies if delivery is f.o.b. origin).

(v) 52.247-34, F.o.b. Destination (NOV 1991) (Applies to supplies if delivery is f.o.b. destination).

(c) FAR 52.252-2, Clauses Incorporated by Reference (FEB 1998). This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil

(d) Inspection/Acceptance. The Contractor shall tender for acceptance only those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. The Government must exercise its postacceptance rights--

(1) Within a reasonable period of time after the defect was discovered or should have been discovered; and

(2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item.

(e) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence, such as acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence.

(f) Termination for the Government's convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges that the Contractor can demonstrate to the satisfaction of the Government, using its standard record keeping system, have resulted from the termination.

The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor's records. The Contractor shall not be paid for any work performed or costs incurred that reasonably could have been avoided.

(g) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience.

(h) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (End of clause)

52.219-4 NOTICE OF PRICE EVALUATION PREFERENCE FOR HUBZONE SMALL BUSINESS

CONCERNS (JAN 2011)

(a) Definitions. See 13 CFR 125.6(e) for definitions of terms used in paragraph (d).

(b) Evaluation preference. (1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except--

(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and

(ii) Otherwise successful offers from small business concerns.

(2) The factor of 10 percent shall be applied on a line item basis or to any group of items on which award may be made. Other evaluation factors described in the solicitation shall be applied before application of the factor.

(3) A concern that is both a HUBZone small business concern and a small disadvantaged business concern will receive the benefit of both the HUBZone small business price evaluation preference and the small disadvantaged business price evaluation adjustment (see FAR clause 52.219-23). Each applicable price evaluation preference or adjustment shall be calculated independently against an offeror's base offer.

These individual preference amounts shall be added together to arrive at the total evaluated price for that offer.

(4) When the two highest rated offerors are a HUBZone small business concern and a large business, and the evaluated offer of the HUBZone small business concern is equal to the evaluated offer of the large business after considering the price evaluation preference, award will be made to the HUBZone small business concern.

(c) Waiver of evaluation preference. A HUBZone small business concern may elect to waive the evaluation preference, in which case the factor will be added to its offer for evaluation purposes. The agreements in paragraphs

(d) and (e) of this clause do not apply if the offeror has waived the evaluation preference.

___ Offeror elects to waive the evaluation preference.

(d) Agreement. A HUBZone small business concern agrees that in the performance of the contract, in the case of a contract for

(1) Services (except construction), at least 50 percent of the cost of personnel for contract performance will be spent for employees of the concern or employees of other HUBZone small business concerns;

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), at least 50 percent of the cost of manufacturing, excluding the cost of materials, will be performed by the concern or other HUBZone small business concerns;

(3) General construction. (i) At least 15 percent of the cost of contract performance to be incurred for personnel will be spent on the prime contractor's employees;

(ii) At least 50 percent of the cost of the contract performance to be incurred for personnel will be spent on the prime contractor's employees or on a combination of the prime contractor's employees and employees of HUBZone small business concern subcontractors;

(iii) No more than 50 percent of the cost of contract performance to be incurred for personnel will be subcontracted to concerns that are not HUBZone small business concerns; or

(4) Construction by special trade contractors. (i) At least 25 percent of the cost of contract performance to be incurred for personnel will be spent on the prime contractor's employees;

(ii) At least 50 percent of the cost of the contract performance to be incurred for personnel will be spent on the prime contractor's employees or on a combination of the prime contractor's employees and employees of HUBZone small business concern subcontractors;

(iii) No more than 50 percent of the cost of contract performance to be incurred for personnel will be subcontracted to concerns that are not HUBZone small business concerns.

(e) A HUBZone joint venture agrees that the aggregate of the HUBZone small business concerns to the joint venture, not each concern separately, will perform the applicable percentage of work requirements.

(f)(1) When the total value of the contract exceeds $25,000, a HUBZone small business concern nonmanufacturer agrees to furnish in performing this contract only end items manufactured or produced by HUBZone small business concern manufacturers.

(2) When the total value of the contract is equal to or less than $25,000, a HUBZone small business concern nonmanufacturer may provide end items manufactured by other than a HUBZone small business concern manufacturer provided the end items are produced or manufactured in the United States.

(3) Paragraphs (f)(1) and (f)(2) of this section do not apply in connection with construction or service contracts.

(g) Notice. The HUBZone small business offeror acknowledges that a prospective HUBZone awardee must be a HUBZone small business concern at the time of award of this contract. The HUBZone offeror shall provide the Contracting Officer a copy of the notice required by 13 CFR 126.501 if material changes occur before contract award that could affect its HUBZone eligibility. If the apparently successful HUBZone offeror is not a HUBZone small business concern at the time of award of this contract, the Contracting Officer will proceed to award to the next otherwise successful HUBZone small business concern or other offeror.

(End of clause)

CNIN-NOTICE-0002 NSWC CRANE GENERAL PROCUREMENT INFORMATION (JAN 2013)

HANDLING OF INFORMATION BY CONTRACTOR SUPPORT PERSONNEL

Contractors are hereby notified that contractor support personnel within the NSWC Crane Contracting Department may be handling Bid and Proposal or Quote data as well as other correspondence and documentation concerning this action. Non-disclosure statements have been executed by all contractor support personnel participating in the process and are maintained by NSWC Crane.

BUSINESS HOURS

NSWC Crane Division allows flexible working hours for its employees. The core time when all employees are scheduled to work is 9:00 am to 3:00 pm (local time).

TAX EXEMPTION

Section 39(A) and Section 6 of the Indiana Gross Income Tax Act of 1933, specifically exempts NSWC Crane Division as a government activity from any payment of sales and use taxes.

The assigned Exemption Number is 0018103400015

VENDOR SURVEY

The NSWC Crane Contracting Office's mission is to provide responsive, best-value contracting and acquisition support for all customers, accomplished in partnership with industry, academia, and other Government activities, while maintaining the public's trust and fulfilling public policy objectives. In an effort to continually improve our services, the Contracting Office is conducting a survey of our vendors. Your comments will help us determine if we are accomplishing our mission and provide recommendations for ways to improve our processes. Please consider taking the time to complete the survey which can be accessed at the following address:

http://www.navsea.navy.mil/nswc/crane/working/contracting/Lists/Vendor%20Survey/overview.aspx.

NSWC CRANE VISITOR INFORMATION: PORTABLE ELECTRONIC DEVICE POLICY

NSWC Crane has implemented full compliance with the NAVSEA Access and Movement Control Instruction 5510.2C, dated 7 August 2012, which restricts the use of portable electronic devices (PEDs) in all NAVSEA spaces.

The policy states all government civilian, military and contractor personnel assigned to NSWC Crane and all visitors are prohibited from bringing any device or equipment capable of recording, transmitting or exporting photographic images or audible information of any kind into NSWC Crane spaces when classified information, Unclassified Naval Nuclear Propulsion Information (UNNPI) or other Controlled Unclassified Information (CUI) is exposed, unless specifically authorized by NSWC Crane. CUI may be present in any NSWC Crane space, making these personal devices prohibited throughout NSWC Crane spaces. For the purpose of this policy, “spaces” include outdoor ranges and test areas. These devices can be used in non-NSWC Crane areas and EastGate and WestGate are not currently covered by this policy. NSWC Crane areas will be clearly marked.

This includes, but is not limited to, personal computers, personal portable electronic devices (PEDs), electronic voice recorders and tape recorders. Personal PEDs include cellular telephones (including smartphones), devices like iPods and MP3 players, two-way pagers, personal digital assistants (PDAs), removable storage devices and handheld tablet/laptop computers. This also includes e-readers (kindles and nooks), as new versions of these devices contain cameras and distinguishing models is not evident by sight alone. One-way pagers are allowed for fire, safety and security purposes.

RAPIDGate NSA/NSWC CRANE INSTALLATION ACCESS For contracts which include the FAR 52.204-9 Personal Identity Verification of Contractor Personnel or will otherwise require frequent access to Naval Support Activity (NSA)/NSWC Crane site, the Contractor shall consider taking advantage of the benefits available from the following RAPIDGate program:

NSA/NSWC Crane is implementing the Navy Commercial Access Control System (NCACS) projects. The NCACS is the standard identity management and perimeter installation access control solution for the access management of vendors, contractors, suppliers and service providers who are not authorized a Common Access Card (CAC). The rationale for implementation of this system is to increase security while reducing impacts to the contractor community by improving efficiencies for base entry.

The new protocol being implemented to fulfill this NCACS requirement is the RAPIDGate system. The system meets Presidential Directive (HSPD-12) requirements by providing background checks of contractor personnel. A personal badge that affords base access (and/or multiple base access) for one year will be issued to each Contractor employee that meets background check criteria. While Contractors are not required to participate in this program, those Contractors who choose not to participate will be required to obtain daily passes for base access.

There are costs for contractors to participate in the RAPIDGate program which include a fee for the Contractor’s form and a fee per Contractor employee. Costs to participating Contractors are recaptured through increased productivity of their employees due to the reduction in waiting times at the Pass and Identification Office and Entry Control Point (ECP). Costs shall not be directly billed to the Government. The costs to participate in the RAPIDGate program are identified in the table below.

A Government Sponsor is required to validate a Contractor’s request for RAPIDGate access, and shall be the Contracting Officer’s Representative (COR). If there is no COR, then the Government Sponsor is the Contracting Officer (KO).

The Government does not guarantee the contractor’s successful enrollment or the successful enrollment of any contractor employees in the RAPIDGate program. Significant delays may result from choosing to access the installation by obtaining a one day pass. The Government will not be held responsible for any access delays associated with using the daily pass process. Please address any questions or concerns regarding RAPIDGate to the COR or the local Base Security Office personnel listed below.

NSA/NSWC Crane RAPIDGate Primary Program Point of Contact is Jon Thomas, and can be reached at Jon.M.Thomas@Navy.mil or at 812-854-5624. NSA/NSWC Crane RAPIDGate Secondary Program Point of Contact is Larry Patterson, and can be reached at Larry.Patterson@Navy.mil or 812-854-5642.

Additional information is available at http://www.rapidgate.com/rapidgate

RAPIDGate Pricing—(Subject to change without notice):

Program Enrollment Price

Single Installation Company $199.99 annually

Single Installation Employee $159.00 annually

Enterprise (Multiple installations) Company $249.00 annually - 2 or more installations

Enterprise (Multiple installations) Employee $199.00 annually - 2 or more installations

90 day Option Employee $59.00 per 90 days

Replacement Credential Employee $30.00 per credential

NSWC CRANE RECEIVING FACILITY SCHEDULE

Contractors shall schedule deliveries to ensure arrival at destination only on Monday through Friday (excluding holidays) between the hours of 7:00 A.M. and 2:00 P.M. Eastern Standard Time (EST). The receiving facility is closed on Saturdays and Sundays.

CNIN-SAP-001 PAYMENT INSTRUCTIONS (JAN 2013)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012)

(a) Definitions. As used in this clause--

Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization.

Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system.

(b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order:

(1) Document type. The Contractor shall use the following document type(s).

COMBO

(Contracting Officer: Insert applicable document type(s). Note: If a “Combo” document type is identified but not supportable by the Contractor's business systems, an “Invoice” (stand-alone) and “Receiving Report” (stand-alone) document type may be used instead.)

(2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer.

INSPECTION – DESTINATION

ACCEPTANCE - DESTINATION

(Contracting Officer: Insert inspection and acceptance locations or “Not applicable”.)

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table* Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC TBD Issue By DoDAAC N00164 Admin DoDAAC N00164 Inspect By DoDAAC N/A Ship To Code N00164 Ship From Code N/A Mark For Code N/A Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information or “See schedule” if multiple ship to/acceptance locations apply, or “Not applicable.”)

(4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request.

(5) WAWF email notifications. The Contractor shall enter the email address identified below in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system.

Stephanie.toy@navy.mil

(Contracting Officer: Insert applicable email addresses or “Not applicable.”)

(g) WAWF point of contact. (1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Stephanie Toy 812-854-56+6

(Contracting Officer: Insert applicable information or “Not applicable.”)

(2) For technical WAWF help, contact the WAWF helpdesk at 866-618-5988.

NON-WAWF INVOICE INSTRUCTIONS

For invoices that CANNOT be submitted via WAWF because the DFAS office is not WAWF enabled, requires NSWC Crane’s LPO certification, or if the vendor is a foreign vendor and does not have a U.S. bank account: Submit invoices in hard copy in accordance with the submission of invoice clause herein to the address below if different than page 1:

NSWC CRANE ERP

VENDOR PAY

CODE 008121 BLDG 64

300 HWY 361

CRANE IN 47522-5001

Or e-mail the invoice to the following address: CRAN_VendorPay@navy.mil The subject line of the e-mail must read as follows: Company Name/ Contract Number/ Order Number

For WAWF questions, contact the NSWC Crane point of contact via e-mail:

Cran_Acquisitn_WAWF@navy.mil

To determine whether a DFAS is WAWF-enabled, review the following website: https://wawf.eb.mil

HQ G-2-0009 SUPPLEMENTAL INSTRUCTIONS REGARDING ELECTRONIC INVOICING

(NAVSEA) (SEP 2012)

(a) The Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the technical instruction (TI), sub line item number (SLIN), or contract line item number (CLIN) level, rather than on a total contract/TO basis, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by TI, SLIN, or CLIN level. For other than firm fixed price subcontractors, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer (CO) and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the CO and COR; or other method as agreed to by the CO.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and CO on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and CO email notification as required herein.

PAYMENT STATUS INQUIRIES

The status of invoice payments can be obtained through the MOCAS myInvoice (formerly New VPIS) at the following:

https://myinvoice.csd.disa.mil/

It is recommended that the vendor download the “myInvoice Report/Query Instructions”, “Registration Instructions”, and “myInvoice Status Code Document”. Registration is required before payment inquiries can be made.

Vendors should register on-line and will be granted access to the myInvoice system if their registration information matches their company information in the CCR. Vendors are limited viewing only their data as defined by the CAGE/DUNS/TIN combinations.

You may also contact a DFAS Paying Office Vendor Pay Customer Service offices listed below:

F03000 DFAS Dayton 1-800-756-4571 - option 2, option 3 F67100 DFAS Limestone 1-800-756-4571 - option 2, option 3 HQ0105 DFAS Indianapolis 1-888-332-7366 HQ0131 DFAS Columbus Caps 1-800-756-4571 - option 2, option 2 HQ0248 DFAS Rome 1-800-553-0527 HQ0250 DFAS Rome 1-800-553-0527 HQ0251 DFAS Columbus Navy 1-800-756-4571 - option 2, option 4 HQ0302 DFAS Rome 1-800-553-0527 HQ0303 DFAS Rock Island 1-800-756-4571 - option 2, option 5 HQ0304 DFAS St. Louis 1-800-756-4571 - option 2, option 5 HQ0337 DFAS Columbus North 1-800-756-4571 - option 1 HQ0338 DFAS Columbus South 1-800-756-4571 - option 1 HQ0339 DFAS Columbus West 1-800-756-4571 - option 1 HQ0347 DFAS Indianapolis 1-888-332-7366 HQ0490 DFAS Indianapolis 1-888-332-7366 HQ0672 DFAS Rome 1-800-553-0527 M67443 DFAS Kansas City 1-800-756-4571 - option 2, option 4 N0024B Navy_ERP NAVSEA HQ 1-202-781-3145 N62828 Navy_ERP NSWC Crane cran_vendorpay@navy.mil N64142 Navy_ERP NAWCAD 1-732-323-1082 (Patuxent River, Lakehurst and NAVAIR HQ) N68732 DFAS Cleveland 1-800-756-4571 option 2 and 4

(Now pays DFAS Charleston N68892, DFAS Pensacola N68566, DFAS San Diego N68688) SL4701 DFAS Columbus EBS 1-800-756-4571 option 2 and 2

To determine which system to use or which payment office to call see the following blocks of your contract document for payment offices designation:

Document Block SF 26 Award/Contract 12 SF 33 Award/Contract 25 SF 1449 Solicitation/Contract/Order for Commercial Items 18a DD1155 Order for Supplies or Services 15

PROMPT PAYMENT CONSTRUCTIVE ACCEPTANCE

Constructive Acceptance as defined in the Prompt Payment Act is hereby changed to:

For the sole purpose of computing an interest penalty that might be due the contractor, government acceptance shall be deemed to have occurred constructively on the ____30th day after the contractor delivered the supplies or performed the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or contractor compliance with a contract provision.

CNIN-SAP-013 Data Rights The Government shall have unlimited, government purpose, specifically negotiated) data rights to all data generated in accordance with DFARS 252.227-7013 or DFARS 252.227-7015 for commercial procurements.

Section SAP Prov - SAP Provisions

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management JUL 2013 52.204-8 Annual Representations and Certifications JUL 2013 52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

DEC 2012

252.225-7020 Trade Agreements Certificate JAN 2005

CLAUSES INCORPORATED BY FULL TEXT

52.211-14 NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, AND ENERGY PROGRAM USE (APR 2008)

Any contract awarded as a result of this solicitation will be DX rated order; X DO rated order certified for national defense, emergency preparedness, and energy program use under the Defense Priorities and Allocations System (DPAS) (15 CFR 700), and the Contractor will be required to follow all of the requirements of this regulation. [Contracting Officer check appropriate box.] (End of provision)

52.219-1 SMALL BUSINESS PROGRAM REPRESENTATIONS (APR 2012) - ALTERNATE I (APR 2011)

(a)(1) The North American Industry Classification System (NAICS) code for this acquisition is 334419 (insert NAICS code).

(2) The small business size standard is 500 (insert size standard).

(3) The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

(b) Representations. (1) The offeror represents as part of its offer that it ( ) is, ( ) is not a small business concern.

(2) (Complete only if the offeror represented itself as a small business concern in paragraph (b)(1) of this provision.)

The offeror represents, for general statistical purposes, that it ( ) is, ( ) is not a small disadvantaged business concern as defined in 13 CFR 124.1002.

(3) (Complete only if the offeror represented itself as a small business concern in paragraph (b)(1) of this provision.)

The offeror represents as part of its offer that it ( ) is, ( ) is not a women-owned small business concern.

(4) Women-owned small business (WOSB) concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (b)(3) of this provision.] The offeror represents as part of its offer that--

(i) It ( ) is, ( ) is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (b)(4)(i) of this provision is accurate for each WOSB concern eligible under the WOSB Program participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern eligible under the WOSB Program and other small businesses that are participating in the joint venture: ----------.] Each WOSB concern eligible under the WOSB Program participating in the joint venture shall submit a separate signed copy of the WOSB representation.

(5) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a women-owned small business concern eligible under the WOSB Program in (b)(4) of this provision.] The offeror represents as part of its offer that--

(i) It ( ) is, ( ) is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and

(ii) It [ ] is, [ ] is not a joint venture that complies with the requirements of 13 CFR…