ZAPF_Workstation_Statement_of_Work.doc

Statement of Work Office Workstations

1. Purpose: To acquire two panel office workstations w/doors, work surface and power panels. The following are a list of requirements:

2. Description: The following are descriptive features of the office work stations that meets the above-referenced requirements:

a. One new ZAPF acoustical powered panel office @ 10’ W x 11’ D

(Referred to as Office #1). Office will consist of the following: 81”h front walls with a wood panel door; 81” left side wall facing door; 65”h back walls at window; 65” h right side walls with 42” h panel for 18” wall section to allow for thermostat access; two (2) led task lights; peninsula desk work surface, square edge; one 60"w x 16"h flipper door unit; one 36"w x 16”h flipper door unit; one (1) storage tower 30” w right panel door w/lock. F/F pedestal; and BBF pedestal; extended worksurface in back left corner facing to cover a 2-drawer lateral file cabinet; additional 36” W x 24” work surface if access permits; (to be determined during design);

Provide full duplex outlets – two on the overhead/peninsula wall (65”h); two on the back wall (65” h) and one in the left rear corner of the 81” h wall. All locks for this office are keyed the same

b. One new ZAPF acoustical powered panel office @ 11' W x 11’D panel office (Referred to as Office #2). Office will consist of the following: 81” h front and side walls, with a wood panel door; 65” h back walls at window; two led task lights; peninsula desk work surface; square edge; one 60” w x 16” h flipper door unit; one 36” w x 16” h flipper door unit; one (1) storage tower 30” w right panel door w/lock. F/F pedestal; and BBF pedestal; extended work surface in back left corner facing to cover a 2- drawer lateral file cabinet; additional 36” W x 24” work surface if access permits; (to be determined during design).

Provide full duplex outlets – two each on the overhead wall; 65”h, and one in the back-left corner of the left 81” h wall (same side wall door is mounted on), and 2 for the 81” h overhead/peninsula wall. All locks for this office are keyed the same. All locks for this office are keyed the same.

c. Remove existing raceways on two low stations to install new full duplex power.

d. Install new shared harness and jumpers to provide full duplex power for each low station. – There will be two sets of outlets for each station.

e. Provide a new 36” raceway cover missing in Office #3.

f. Disassemble and removal of two current work stations in locations where private offices will be installed. Installation - two panel offices with door.

g. Furniture must match exactly to the existing fabric color and finish of materials currently installed.

Work surface color: White Nebula

Edge color: Silver Sand

Fabric color: Fiddle Neck #102

Fabric pattern: Dune

h. Requires installation no later than 4-6 weeks after awarding of contract.

i. Shipping to: 102 3rd Ave. Building 39, Fort McNair, DC, 20319 Attn: Stan Trader MDW J1.

PAGE