mety060 od.pdf
PDF 7 KB Posted
- Attached to
- Open inspect and report IMU, CALIBRATED
- Solicitation number
- 70Z08025QMETY060
About this file
This is an Overhaul Description document for an Inertial Navigation System (INS) issued by the US Coast Guard Surface Force Logistics Center. The document specifies requirements for overhauling a specific navigation system component (Stock Number 6605-01-523-8655, Part Number 1982418) used on WMEC 270 and WMEC 282 vessels. The repair must be conducted in accordance with SFLC Spec R-400-299-M for electronic equipment and modules, with a cost estimate not to exceed $56,520.
Key technical and contractual requirements include individual packaging using MIL-STD-2073-1E Method 41, electrostatic discharge protective wrapping, and marking per MIL-STD-129R with barcode standards. The contractor must provide a standard manufacturer's warranty and guarantee the item against defects for a period up to two years after delivery. Government acceptance will be made at destination, contingent upon verification of no transit damage, order completeness, and compliance with packaging and marking requirements. Northrop Grumman Systems is listed as a recommended source, with Melinda Hill identified as the point of contact as of 5/25/22.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 52.212-3.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
OVERHAUL DESCRIPTION
FOR OFFICIAL USE ONLY
ITEM NAME INERTIAL NAVIGATIONSYSTEM
STOCK NUMBER 6605-01-523-8655
PART NUMBER 1982418
USED ON WMEC 270, WMEC 282
Items as received by the contractor must be complete and of the proper cited part number. Discrepancies shall be reported to the Coast Guard Contracting Officer.
OVERHAUL REQUIREMENTS:
THE IS A COMPONENT OF THE MK39 MOD 3A GYROCOMPASS INERTIAL NAVIGATION SYSTEM
(INS). THE INERTIAL MEASUREMENT UNIT (IMU) IS PART OF THE INS.
REPAIR IAW SFLC SPEC R-400-299-M SPECIFICATION FOR THE REPAIR OF ELECTRONIC
EQUIPMENT AND MODULES (10/2014)
PACKAGING:
Individually packaged in accordance with MIL-STD-2073-1E Method 41, initially wrapped in Electrostatic Discharge Protective material conforming to MIL-PRF- 81705E, Type III.
MARKING:
Marking IAW MIL-STD-129R except bar coded IAW ISO/IEC-16388-2007, Code 39 Symbology.
WARRANTY:
X A. Standard Manufacturer's Warranty
B. Item being repaired as an "onboard repair" or a "system stock" item and will be put into inventory. NOT FOR IMMEDIATE INSTALLATION.
Contractor must guarantee item against defects that lead to failure for days after installation for a period of up to two (2) years after delivery to Coast Guard.
GOVERNMENT ACCEPTANCE:
Acceptance will be made at destination by a Government representative.
Acceptance will be contingent upon the representative's verification of no damage in transit, correctness and completeness of order and contractor's conformance to preservation/packaging, packing and marking requirements.
SHELF LIFE CD 0
FOR OFFICIAL USE ONLY
PACKAGING AND MARKING FOR SHIPMENT:
X A. Each unit shall be packed individually in it's own wooden box which shall be capable of providing adequate protection to the item during multiple shipments. Mark each box in legible black print lettering with the following information:
NATIONAL STOCK NUMBER
ITEM NAME
PART NUMBER
GOVERNMENT ORDER NUMBER
6605-01-523-8655
INERTIAL NAVIGATIONSYSTEM
1982418
PRESERVATION / PACKAGING:
A. Each unit shall be individually preserved and wrapped for protection against deterioration for a period of two (2) years minimum.
X B. See Attachments
B. See Attachments
And the words: "Coast Guard SFLC Material, Condition "A"
RECOMMENDED SOURCES:
NORTHROP GRUMMAN SYSTEMS
3100 DISTRICT AVENUE
CHARLOTTESVILLE, VA 22901-2827
MELINDA HILL BEST POC AS OF 5/25/22
MELINDA.HILL@NGC.COM
WRITTEN BY:
DATE :
SEATON WOODY
13 MAR 25
Cost Estimate for Overhaul NOT TO EXCEED: $56,520
File details come from the government source that posted it. Updated .