MATERIAL ORDERING DATA.pdf
PDF 355 KB Posted
- Attached to
- STRUCTURAL ANGLE
- Solicitation number
- SPMYM223Q1828
About this file
This document provides material ordering data for aluminum extrusions according to ASTM B221 specifications. It details the required alloy (5086), temper (H111), and nominal cross-sectional dimensions of 3" x 3" x 1/4" thickness extrusions to be supplied in 20 foot lengths. Certification to ASTM B221 is required along with identification marking per ASTM B666/B666M. Preservation, packaging and packing should be at a commercial level in accordance with ASTM B660.
The related federal contract opportunity is solicitation number SPMYM223Q1828 for structural angle from the Defense Logistics Agency Land and Maritime. No further details are provided on the opportunity requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CDRL.pdf | ||
| SPMYM223Q1828.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM B221
IDN: N4523A 3174-7014
ICN: 88MSM00001 KO: 000 KOI: 000
Paragraph 4.1 Ordering data
4.1.1 ASTM B221, STANDARD SPECIFICATION FOR ALUMINUM AND
ALUMINUM-ALLOY EXTRUDED BARS, RODS, WIRE, PROFILES, AND TUBES,
dated 01 SEP 2021.
4.1.2 Quantity in pieces or pounds:
4.1.3 Alloy: 5086 (see Section 7 and Table 1),
4.1.4 Temper: H111 (Section 8 and Table 2),
4.1.5 Nominal cross-sectional dimensions as follows:
4.1.5.1 For rod and round wire diameter: N/A
4.1.5.2 For square-cornered bar and wire depth and width: N/A
4.1.5.3 For sharp-cornered hexagonal or octagonal bar and wire distance across flats:N/A
4.1.5.4 For round tube outside or inside diameter and wall thickness:N/A
4.1.5.5 For square or sharp-cornered tube other than round distance across flats and wall thickness:3" X 3" X 1/4" THK
4.1.5.6 For round-cornered bars, profiles, tube other than round, square, rectangular, hexagonal, or octagonal with sharp corners drawing required:N/A
4.1.6 Length: 20 Foot Length
4.2 Additionally, orders to this specification shall include the following information when required by the purchaser:
4.2.1 Is solution treatment at the press unacceptable? : N/A
4.2.2 Is heat treatment in accordance with Practice B918 required (9.4)? : N/A
4.2.3 Is ultrasonic inspection required (Section 17 Table 3)? : Not Required.
4.2.4 Is inspection or witness of inspection and tests
required prior to material shipment (Section 18)? : Not Required.
4.2.5 Is certification required (Section 22)? : Mill Certification
4.2.6 Is marking for identification required in accordance with Practice B666/B666M, section 20? : Required.
MATERIAL ORDERING DATA
ASTM B221
4.2.7 Does Practice B660 apply? Yes.
If so, provide the levels of preservation, packaging, and packing required:
Commercial
4.2.8 Requirements for tensile property and dimensional tolerance for sizes not specifically covered (8.1.3 and 15.1.1): N/A
4.2.9 Is Titanium and Zirconium algorithm allowed as shown in Table 1, Footnote H, when ordering 2014 or 2024? N/A
4.2.10 Is Titanium and Zirconium algorithm allowed as shown in Table 1, Footnote T, when ordering 7075? N/A
Additional Data Requirements: N/A
Prepared By: Willie Leach
Code: C/244.4
File details come from the government source that posted it. Updated .