1.01 TDP.pdf

** INTEGRATED TECHNICAL, ITEM MANAGEMENT AND PROCUREMENT **

** TECHNICAL DATA PACKAGE **

** REQUESTED BY USER: ZAPX369 ****** ****** ****** *** * ** *** **

** DELIVER TO: CERRILL MCMEEKIN ***** ****** ****** *** * * ** ****

** ZID6 **** ****** ****** *** ** ** ** **********

** X- *** ****** ****** *** ***** ** ***********

** REQUESTED COPIES: 001 * ***** ***** ** ***** ** ************

** REMARKS: **

** FOLDER: 231880029 **

** NIIN: 015314997 **

** TYPE: B **

TECHNICAL DATA PACKAGE

NIIN: 015314997 VERSION: 002 PAGE 1

ITEM NAME: INDICATOR,ANGLE AUGUST 29, 2025

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the INDICATOR,ANGLE .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 Documents, drawings, and publications supplied are listed under "Drawing Number". These items should be retained until an award is made.

2.1.2 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

2.2 Order of Precedence - In the event of a conflict between the text of this contract/purchase order and the references and/or drawings cited herein, the text of this contract/purchase order shall take precedence. Nothing in this contract/purchase order, however, shall supersede applicable laws and regulations unless a specific exemption has been obtained.

2.3

DRAWING NO. CAGE REV DOC TYPE DISTR CD SHEET NR REV TYPE SIZE

2756A-AL00552 94756 B SP D3 0001 B 49998 0056705

2756A-AL00552 94756 B SP D3 0001.1 B 49998 0053610

2756A-AL00552 94756 B SP D3 0002 B 49998 0074932

2756A-AL00552 94756 B SP D3 0003 B 49998 0070700

2756A-AL00552 94756 B SP D3 0004 B 49998 0083382

2756A-AL00552 94756 B SP D3 0005 B 49998 0077023

2756A-AL00552 94756 B SP D3 0006 B 49998 0071727

2756A-AL00552 94756 B SP D3 0007 B 49998 0040111

2756A-AL00552 94756 B SP D3 0008 B 49998 0043201

2756A-AL00552 94756 B SP D3 0009 B 49998 0033739

2756A-AL00552 94756 B SP D3 0010 B 49998 0106067

2756A-AL00552 94756 B SP D3 0011 B 49998 0101023

2756A-AL00552 94756 B SP D3 0012 B 49998 0047894

2756A-AL00552 94756 B1 1N D3 0001 B1 49998 0074307

4694941 80064 D B2 0001 D 49998 0096775 4694941 80064 D1 1N D3 0001 D1 49998 0029497 6357100 53711 G D3 0001 G 49998 0354685 6357100 53711 G D3 0002 G 49998 0277912 6357100 53711 G D3 0003 G 49998 0191546 6357100 53711 G D3 0004 G 49998 0217841 6357100 53711 G D3 0005 G 49998 0116820 6357100 53711 G D3 0006 G 49998 0103709

6357100 53711 D PL D3 0001 D 49998 0070694

6357100 53711 D PL D3 0002 D 49998 0062791

6357100 53711 D PL D3 0003 D 49998 0068480

6357100 53711 D PL D3 0004 D 49998 0068603

6357100 53711 D PL D3 0005 D 49998 0062891

6357100 53711 D PL D3 0006 D 49998 0061703

6357100 53711 D PL D3 0007 D 49998 0066724

6357100 53711 D PL D3 0008 D 49998 0068583

6357100 53711 D PL D3 0009 D 49998 0062370

6357100 53711 D PL D3 0010 D 49998 0061233

6357100 53711 D PL D3 0011 D 49998 0065195

6357100 53711 D PL D3 0012 D 49998 0062146

6357100 53711 D PL D3 0013 D 49998 0063192

6357100 53711 D PL D3 0014 D 49998 0061777

6357100 53711 D PL D3 0015 D 49998 0068419

6357100 53711 D PL D3 0016 D 49998 0067940

6357100 53711 D PL D3 0017 D 49998 0061847

6357100 53711 D PL D3 0018 D 49998 0060701

6357100 53711 D PL D3 0019 D 49998 0067760

6357100 53711 D PL D3 0020 D 49998 0064601

6357100 53711 D PL D3 0021 D 49998 0063873

6357100 53711 D PL D3 0022 D 49998 0062314

6357100 53711 D PL D3 0023 D 49998 0066858

6357100 53711 D PL D3 0024 D 49998 0066829

6357100 53711 D PL D3 0025 D 49998 0061189

6357100 53711 D PL D3 0026 D 49998 0046785

6357100 53711 D PL D3 0027 D 49998 0049537

NIIN: 015314997 VERSION: 002 PAGE 2

ITEM NAME: INDICATOR,ANGLE AUGUST 29, 2025

6357100 53711 D1 1N D3 0001 D1 49998 0031372 6357140 53711 - E2 0001 - 49998 0317348

DOCUMENT REFERENCES

SPEC NO. SLASH NO. PART NO REV DATE DISTR CD AMEND CHG NTC SUPP

MIL-STD-130 M 02 DEC 05 A

MIL-I-45208 A 24 JUL 81 A 1

ISO9001 17 APR 01 A

MIL-STD-973 13 JAN 95 A 03

3. REQUIREMENTS

3.1 Design, Manufacture, and Performance - Except as modified herein, the INDICATOR,ANGLE furnished under this contract/purchase order shall meet the design, manufacture, and performance requirements specified on drawing <6357140 Assembly -1> cage <53711> .

3.2 Marking - This item shall be physically identified in accordance with MIL-STD-130.

3.3 Configuration Control - MIL-STD-973 entitled "Configuration Management", Paragraph 5.4.8, Configuration Control (Short Form Procedure), is hereby incorporated. The Contractor shall submit all Engineering Change Proposals in accordance with MIL-STD-973, Paragraph 5.4.8.2 and Appendix D. Requests for Deviations shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.3 and Appendix E. Requests for Waivers shall be processed in accordance with MIL-STD-973, Paragraph 5.4.8.4 and Appendix E. (Original and two copies shall be submitted to Contracting Officer, NAVICP-MECH, P. O. Box 2020, Mechanicsburg Pa. 17055-0788.)

3.3.1 Configuration Control - When the Contractor has received authorization on a prior contract for the same NSN for the use of a drawing of a later revision status, that authorization is hereby extended to all succeeding contracts/purchase orders until another drawing revision is approved. The Contractor will notify the PCO of this occurrence in each instance, in the response to the solicitation. Such notification shall be in writing setting forth the contract under which the prior authorization was granted, the date of the granting of the authorization, and the name of the granting authority.

Contractors shall also refer technical inquiries (other than those covered by MIL-STD-973) on company letterhead signed by a responsible company official, with copies distributed as stated below.

The original and two copies of all Contractor generated correspondence regarding configuration shall be submitted to Contracting Officer, NAVICP-MECH, P.O. Box 2020, Mechanicsburg, PA 17055-0788.

Contractors are cautioned that implementing engineering changes, waivers, deviations or technical inquiries into the contract/purchase order without approval of the Contracting Officer will be at the sole risk of the Contractor.

3.4 Mercury Free - The material supplied under this contract/purchase order is intended for use on submarines/surface ships and therefore shall contain no metallic mercury and shall be free from mercury contamination. Mercury contamination of the material will be cause for rejection.

If the inclusion of metallic mercury is required as a functional part of the material furnished under this contract, the Contractor shall obtain written approval from the Procurement Contracting Officer before proceeding with manufacture. The contractor's request shall explain in detail the requirements for mercury, identify specifically the parts to contain mercury, and explain the method of protection against mercury escape. Such a request will be forwarded directly to the Procurement Contracting Officer with a copy to the applicable Government Inspector. Upon approval by the Contracting Officer, the vendor will provide a "Warning Plate" stating that metallic mercury is a functional part of the item and will include name and location of that part.

The use of mercury, mercury compounds, or mercury-bearing instruments and/or equipment in a manner which might cause contamination in the manufacture, assembly, or test of material on this contract is prohibited. The most probable causes of contamination are direct-connected manometers, mercury vacuum pumps, mercury seals, or the handling of mercury in the immediate vicinity. Mercury switches, mercury in glass thermometers, standard cells and other items containing mercury may be used if they are located so as not to constitute a contamination hazard.

If external contamination by metallic mercury occurs or is suspected, the following test may be used to determine whether contamination by metallic mercury exists or whether corrective cleaning measures have been effective. Enclose the equipment in a polyethylene bag or close-fitting airtight container for eight hours at room temperature (70 degrees F minimum).Sample the trapped air and if mercury vapor concentration is 0.01 mg/cu meter or more, the material is mercury contaminated insofar as the requirements of this contract are concerned.

These requirements shall be included in any subcontract or purchase order hereunder and the Contractor shall insure SubContractor compliance with these requirements.

Technical questions pertaining to these requirements shall be referred to the Procurement Contracting Officer via the cognizant Administrative Contracting Officer. For background, the following information is provided:

NIIN: 015314997 VERSION: 002 PAGE 3

ITEM NAME: INDICATOR,ANGLE AUGUST 29, 2025

Mercury is corrosive to gold, silver, nickel, stainless steels, aluminum and copper alloys. Stainless steels, nickel, and copper alloys are widely used in reactor plants and other submarine/surface ship systems. Accidental trapping of mercury in a component could cause serious damage to vital parts. Mercury is also toxic if inhaled, ingested, or absorbed through the skin. It is evident that grave consequences could result from small amounts of mercury vapor present in an unreplenished submarine/surface ship atmosphere.

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Inspection System Requirements - The supplier shall provide and maintain an inspection/quality system acceptable to the Government. The inspection system requirements for this contract/purchase order shall be in accordance with MIL-I-45208. Suppliers certified to perform under ISO 9001 or ISO 9002 are granted permission to utilize the one desired in lieu of MIL-I-45208.

4.3 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.4 Records of Inspection - (This requirement is not applicable to Government Purchase Orders) Records of all inspection work performed by the Contractor, as referenced elsewhere in this contract, shall be kept complete and available to the Government during the performance of the contract and for a period of four years after final delivery of supplies.

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

6. NOTES

6.1 Ordering Information for Document References - The Department of Defense Single Stock Point (DODSSP), Website http://www.dsp.dla.mil/, provides product information for the Department Of Defense Index Of Specifications and Standards (DODISS) (i.e.Military/Federal Specifications and Standards), Data Item Descriptions (DIDs), and other DODSSP Products.

A. Availability of Cancelled Documents - The DODSSP offers cancelled documents that are required by private industry in fulfillment of contractual obligations in paper format. Documents can be requested by phoning the Subscription Services Desk.

B. Commercial Specifications, Standards, and Descriptions - These specifications, standards and descriptions are not available from Government sources. They may be obtained from the publishers of the applicable societies.

C. Ordnance Standards (OS), Weapons Specifications (WS), and NAVORD OSTD 600 Pages - These type publications may be obtained by submitting a request to:

Commander, Indian Head Division, Naval Surface Warfare Center Code 8410P, 101 Strauss Avenue Indian Head, MD 20640-5035

D. On post-award actions, requests for "Official Use Only" and "NOFORN" (Not Releasable To Foreign Nationals) documents must identify the Government Contract Number, and must be submitted via the cognizant Defense Contract Management Command (DCMC) for certification of need for the document. On pre-award actions such requests must be submitted to the PCO for certification of need for the document.

E. NOFORN Military Specifications and Standards (including Amendments, Change Notices and Supplements, but NOT interim Changes) to be ordered from:

Contracting Officer

NAVICP-MECH

Code 87321 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788

NIIN: 015314997 VERSION: 002 PAGE 4

ITEM NAME: INDICATOR,ANGLE AUGUST 29, 2025

F. Nuclear Reactor Publications Assigned NAVSEA Documents and Identification Numbers (i.e. NAVSEA Welding Standard, NAVSEA 250-1500-1) are to be ordered from:

Commanding Officer

NAVICP-MECH

Code 009 5450 Carlisle Pike P.O. Box 2020 Mechanicsburg, Pa. 17055-0788

G. Technical Manuals Assigned NAVSEA Identification Numbers (i.e. NAVSEA Welding And Brazing Procedure, NAVSEA S9074-AQ-GIB-010/248) are to be ordered from:

Naval Inventory Control Point Code 1 Support Branch 700 Robbins Avenue Phildelphia, Pa. 19111-5094

H. Interim Changes and Classified Specifications shall be obtained by submitting a request on DD Form 1425 to

NAVICP-MECH.

PACKAGING INQUIRY PFW22D80

PPW22D80 A01

FOLDER NR: 23188-0029 TOTAL PDS: 2 TOTAL ITEMS: 1

PD NR: N0010423X8820

NSN: 7HH 6320 015314997 VN ITEM NAME: INDICATOR,ANGLE

PACKAGING REQUIREMENT CODE

PCK CTGY CD: ZZZ0

HM QUP ICQ PMT CD PM WM CUD CT UC LP IC UCL SP MK PACK UNIT PKWT

N 001 000 51 1 00 GB LC D ED A 00 B 03 EFF

UNIT PKCU OPI CAGE SPI NUMBER REV SPI DATE CONTAINER NSN

.167 M

UNIQUE: N SUPPLEMENTAL INSTRUCTIONS

PPPM LEVEL: SHELF LIFE CD: 0 SHELF LIFE ACTION CD: 00

VIEW ADDITIONAL PACKAGING INFO:

PF2 - PRIOR NIIN PF3 - NEXT NIIN PF7 - PRIOR PD PF8 - NEXT PD MORE...

PACKAGING INQUIRY PFW22D80

PPW22D80 A01

FOLDER NR: 23188-0029 TOTAL PDS: 2 TOTAL ITEMS: 1

PD NR: N0010424X2195

NSN: 7HH 6320 015314997 VN ITEM NAME: INDICATOR,ANGLE

PACKAGING REQUIREMENT CODE

PCK CTGY CD: ZZZ0

HM QUP ICQ PMT CD PM WM CUD CT UC LP IC UCL SP MK PACK UNIT PKWT

N 001 000 51 1 00 GB LC D ED A 00 B 03 EFF

UNIT PKCU OPI CAGE SPI NUMBER REV SPI DATE CONTAINER NSN

.167 M

UNIQUE: N SUPPLEMENTAL INSTRUCTIONS

PPPM LEVEL: SHELF LIFE CD: 0 SHELF LIFE ACTION CD: 00

VIEW ADDITIONAL PACKAGING INFO:

PF2 - PRIOR NIIN PF3 - NEXT NIIN PF7 - PRIOR PD PF8 - NEXT PD

LAST PD FOR THIS NIIN