M6786119Q0016_Imperva_Manager_Support_SF_1449_Solicitation.docx

M6786119Q0016

Section SF 30 - BLOCK 14 CONTINUATION PAGE

INSTRUCTIONS TO OFFERORS

1. This is a Combined Synopsis/Solicitation for commercial items prepared in accordance with the format in FAR Subparts 12 and 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a separate written solicitation will not be issued.

1. This solicitation will be awarded on an all-or-none basis. The Government will accept all offers.

1. This is a Brand Name or Equal solicitation under FAR Part 12 using FAR Part 13 procedures for a firm-fixed price task order for the purchase of Software License Renewal and Software Maintenance Support.

1. This requirement is a 100% set-aside to small businesses. The applicable NAICS is 511210 and the small business size standard is $38.5M.

1. Market research conducted via Dynamic Small Business Search (DSBS), System for Award Management (SAM), General Service Administration (GSA) Advantage, Department of Defense Enterprise Software Initiative (DOD ESI), Department of Defense Enterprise Software Licensing (DON ESL), World Wide Web (WWW), and NASA Solutions for Enterprise-Wide Procurement (NASA SEWP); revealed that there is a reasonable expectation of obtaining two or more offers from small business concerns. FAR Part 19.502-2 (a) Each acquisition of supplies or services that has an anticipated dollar value exceeding $3,000 but not over $250,000 is automatically reserved exclusively for small business concerns and should be set aside for small business unless the contracting officer determines there is not a reasonable expectation of obtaining offers from two or more responsible small business concerns that are competitive in terms of market prices, quality, and delivery. Marine Forces Reserve Small Business Program Deputy Director concurs with this action.

1. Section 508 requirements is applicable.

QUOTATION INSTRUCTIONS

1. Quotations/bids/attachments should be submitted as a pdf document via email to shelley.mentzos@usmc.mil and isidro.ramirez@usmc.mil. Each email may not exceed 5MB in size due to server/network restrictions. Submit multiple emails if necessary to ensure timely receipt of your bid. Only pdf email attachments are authorized. Any other email attachment types will be rejected by this agencies servers. All bids should include an overall total price in addition to individual pricing by contract line item (CLIN).

1. All responsible sources may submit a quotation which, if received in a timely manner, should be considered by the agency.

1. Award will be made to the lowest-priced technically acceptable (LPTA) offer The Technical Evaluation Template that will be used to evaluate the LPTA bid is incorporated herein for Contractor awareness only. See FAR 52.212-2 herein for technical evaluation procedures.

1. The Government will consider brand name or equal bids only. Descriptive literature/brochures and proof that software/hardware is authorized to operate on USMC-N00027-NGEN-U Network is required with all quotes bidding equal.

1. Method of Invoicing/Payment: Wide Area Workflow (WAWF) DFARS 252.232-7006 WAWF Instructions.

1. Any direct customer contact by Bidders is not authorized during the solicitation phase or your bid may be at risk of being eliminated from consideration for this solicitation.

1. NO PHONE CALLS will be accepted regarding this solicitation. ALL QUESTIONS should be sent in writing via email to shelley.mentzos@usmc.mil and isidro.ramirez@usmc.mil.

1. The Contracting Officer may review Supplier Performance Risk System (SPRS) and Past Performance Information Retrieval System (PPIRS) for responsibility determination purposes.

1. Offerors bear the burden of ensuring that all portions of the offer (and any authorized amendments) reach the designated office before the deadline specified in the solicitation.

INSTRUCTIONS TO BE CONSIDERED RESPONSIVE TO THIS SOLICITATION

1. Proposals should document their responsiveness to the Section 508 requirements by either providing the Government Product Accessibility Template (GPAT), submitting a Voluntary Product Accessibility Template (VPAT), or Equivalent and Supporting Documentation herein.

1. Bidders should include and comply with all remaining numbered instructions to Offerors:

1. CAGE code

1. DUNS number

1. Address

1. Point of contact (email and telephone number)

1. Delivery lead time after receipt of order for supplies and period of performance for services (including information technology manufacturer licensing and support) if different than listed in the solicitation document. List by line item if the delivery lead time differs from one line item to another. This should be visible on the face of the quote and not incorporated as a link or other attachment.

1. Prompt payment/discount terms (if offered). This will not be used to evaluate offers.

1. Contract number and expiration date should be included if bidding under a GSA, SEWP or other contract. This should be listed per line item unless the contract vehicle is applicable to all line items.

1. Manufacturer Part Number and Contractor Part Number (if different).

1. Supply product descriptive literature or certification statement that the proposed product or service meets all salient characteristics listed in this solicitation and the Technical Evaluation Template provided with the solicitation.

1. All responses to this solicitation should indicate whether the firm is offering a ‘brand name manufacturer's products’ or ‘equal products.’ Descriptive literature is required with all quotes. Firms should submit sufficient descriptive literature to permit the contracting agency to assess whether the product proposed meets all the salient characteristics specified in the solicitation in accordance to the Lowest Priced Technically Acceptable Template included/attached to this solicitation. Firms offering "equal" items should provide the make, model, description of the items, proof that software/hardware is authorized to operate on USMC-N00027-NGEN-U Network, and product literature/brochures. This agency will not be responsible for locating or obtaining any information not included on the face of the offer or a hardcopy attachment to the offer in a response to this solicitation.

1. All Government software contracts are required to include warranty provisions from authorized sellers/resellers of all commercial and non-commercial publisher software products. The Government will not accept any seller/reseller disclaimers of implied publisher standard commercial warranty or automatic renewals. As a minimum software warranties should cover the performance of all required product capabilities, free from defects/bugs, for all intended authorized users, process for reporting/fixing defects remedied at no charge to the Government, effective after Government tests of delivered software product(s), and include the seller/reseller's return policy and procedures.

1. Bidders should allow the Government a trial period to test new software not previously purchased by this customer prior to delivery and start of the software warranty support.

1. All bids for new software/hardware maintenance/support should be for annual 12 months of services from delivery (unless otherwise noted in this solicitation). All bids for renewal of software/hardware maintenance support should include the manufacturer’s period of performance (POP) start and end dates on the face of the quote. The POP for support renewals is the effective date of award through manufacturer’s POP end date. Also, this solicitation may contain support subscriptions with varying support term dates. The offeror should state whether co-term is authorized by the manufacturer on the face of the offer.

1. Bidders should complete the following provision: DFARS 252.239-7009. FAR clauses can be completed manually within this solicitation or printed and completed manually by copying and pasting provision/ clause from this link: http://farsite.hill.af.mil/VFFARA.HTM).

1. Solicitation/Contract Line Item Numbers (CLIN) Structure – Potential bidders should submit bids in the same CLIN structure as outlined in the solicitation for bid evaluation purposes. However, an alternate line item structure can be submitted as an additional attachment consolidating like line items and pricing for award consideration.

1. Assignment of Claims – Potential bidders that may need an Assignment of Claims as described in FAR 32.8 (copy/paste link into web browser: http://farsite.hill.af.mil/VFFARA.HTM) should include a statement on bid that" Assignment of Claims is required if selected for award." Assignment of Claims will not be used as an evaluation factor for award. However, all Assignment of Claims documentation should be submitted with bid or provided BEFORE accepting award for Contracting Officer determination. The Government reserves the right to disapprove a request for Assignment of Claims; vendor will be advised of disapproval prior to drafting of award so vendor may determine if it can still fulfill the contractual requirement without an Assignment of Claims. If request for Assignment of Claims is not included in bid or required documentation is not provided PRIOR to Contractor acceptance of award, the Contracting Officer may reject request for Assignment of Claims and award to the next qualified offeror.

1. System for Award Management (SAM.gov) – Potential bidders not currently registered at SAM.gov should register (including completion of certifications and representations) to be considered for award. Registration may take several days to be visible at SAM.gov, therefore, affected bidders should provide proof of registration/date with bid submittal. Contact SAM.gov website points of contact if you need assistance with registration.

Section SF 1449 - CONTINUATION SHEET

SS-WAF-X45-R-SL1

FFP

X4500 Web Application Firewall , Annual Enhanced Support SN: 1304B00653, 1304B00620 POP: 12 Months (4/3/2019 - 4/2/2020) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-WAF-X45-R-SL1

PURCHASE REQUEST NUMBER: M2638119SU00141

PSC CD: 7022

NET AMT

SS-HSM-NG-R-SL1

HSM Card for X2500 / X4500 / X6500, Annual Enhanced Support POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-HSM-NG-R-SL1

NET AMT

SS-DBF-X45-R-SL1

X4500 Database Firewall, Annual Enhanced Support SN: 1304B00630, 1304B00642 POP: 12 Months (4/3/2019 - 4/2/2020) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-DBF-X45-R-SL1

NET AMT

SS-M15-R-SL1

M150 Management Server , Annual Enhanced SupportSN: 1250B00692 POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-M15-R-SL1

NET AMT

SS-NIC-DSX-NG-R-SL1

Dual SX Fiber Network Interface Card for X2500/ X4500 / X6500 Annual Enhance Support POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-NIC-DSX-NG-R-SL1

NET AMT

U-DBURM-100-R-SL1

User Rights Management License for 100 DBis, Annual Enhance Support -OM POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: U-DBURM-100-R-SL1

NET AMT

SS-HSM-NX-R-SL1

HSM Card for X2510 / X4510 / X6510 / X8510 / X10K, Annual POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-HSM-NX-R-SL1

NET AMT

SS-WAF-X451-R-SL1

X4510 Web Application Firewall , Annual Enhanced Support - OM SN 1551B05484; 1551B05475 POP: 12 Months (4/3/2019 - 4/2/2020) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-WAF-X451-R-SL1

NET AMT

SS-NIC-DSX-NX-R-SL1

Quad SX Fiber Network Interface Card for X2510 / X4510 / X6510 / XB510/ X10K, Annual Enhance Support - OM POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SS-NIC-DSX-NX-R-SL1

NET AMT

SP-SPT-500-R-SL1

SecureSphere for SharePoint, Perpetual Software License, 500 to 1000 Users, Per Annual Enhanced Support - OM POP: 12 Months (4/3/2019 - 4/2/2020) FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SP-SPT-500-R-SL1

NET AMT

SB-WAF-TRS-45-R-TR0

ThreatRadar Reputation Services for 4500 Series, Annual Subscription POP: 12 Months (4/3/2019 - 4/2/2020) NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: M2638119SU00141

MFR PART NR: SB-WAF-TRS-45-R-TRO

NET AMT

SALIENT CHARACTERISTICS

The Marine Forces Reserve (MARFORRES) G6 Cybersecurity Division requires support for the Imperva Web Application and Database firewalls.

Brand or Equal to the following Imperva part numbers;

High Availability

Legacy

Salient Characteristics

1. The threat intelligence services shall:

0. Filter traffic based on real-time reputation data, provide bot protections against distributed denial of service attacks, and provide signatures to protect against zero-day vulnerabilities.

0. Automatically update the Imperva’s signatures at least daily.

1. The annual enhanced support services shall:

1. Provide 24X7 Support for Critical Issues (Severity 1).

1. Provide Advance Replacement Service.

1. Provide Next Business Day Shipping for Firewall Replacement/Parts.

1. The database licenses shall:

1. Be compatible with existing Imperva solution.

1. Provide audit and user validation capabilities.

1. Provide data for user rights reports.

1. The SharePoint licenses shall:

1. Be compatible with existing Imperva solution.

1. Audit all data access activity.

1. Enforce security policies in real-time.

1. Protect against web based attacks.

Prevent unauthorized access.

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

JAMES LEE

2711 MCDONOUGH STREET

JOLIET IL 60436

815-725-7828 FOB: Destination M26381

M26381

M26381

M26381

M26381

M26381

M26381

M26381

M26381

M26381

M26381

1.

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.212-2 EVALUATION--COMMERCIAL ITEMS (OCT 2014)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Lowest Price Technically Acceptable - Offers will be ranked lowest to highest according to price. The lowest price offer will be forwarded to the requiring activity for technical evaluation (offer will be deemed either technically acceptable or technically unacceptable). If the lowest price offer is found technically acceptable and its price is determined fair and reasonable by the Contracting Officer, evaluation will be deemed complete and award will be made based on the lowest price offer. If the lowest price offer is determined technically unacceptable, the next lowest price offer will be sent for technical evaluation and price analysis. This process is repeated in order of price until an offer is deemed technically acceptable and price is determined fair and reasonable. The government will utilize the attached Evaluation Worksheet for Lowest Price Technically Acceptable Determination to evaluate proposals.

TECHNICAL EVALUATION WORKSHEET FOR LOWEST PRICE TECHNICALLY ACCEPTABILITY DETERMINATION

TECHNICAL ACCEPTABILITY SECTION 1:

*Salient Characteristics

Brand or Equal to the following Imperva a.The threat intelligence services shall:

1. i. Filter traffic based on real-time reputation data, provide bot protections against distributed denial of service attacks, and provide signatures to protect against zero-day vulnerabilities.

1. ii. Automatically update the Imperva’s signatures at least daily.

b. The annual enhanced support services shall:

1. i. Provide 24X7 Support for Critical Issues (Severity 1).

1. ii. Provide Advance Replacement Service.

1. iii. Provide Next Business Day Shipping for Firewall Replacement/Parts.

1. c. The database licenses shall:

1. i. Be compatible with existing Imperva solution.

ii. Provide audit and user validation capabilities.

iii. Provide data for user rights reports.

d. The SharePoint licenses shall:

i. Be compatible with existing Imperva solution.

1. ii. Audit all data access activity.

1. iii. Enforce security policies in real-time.

1. iv.Protect against web based attacks.

v. Prevent unauthorized access.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JAN 2019)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(3) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(4) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(5) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

X (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Oct 2018) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

X (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Oct 2015) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11)(i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (ii) Alternate I (NOV 2011) of 52.219-3.

____ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (ii) Alternate I (JAN 2011) of 52.219-4.

____ (13) [Reserved]

X (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (Aug 2018) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Nov 2016) of 52.219-9.

____ (iii) Alternate II (Nov 2016) of 52.219-9.

____ (iv) Alternate III (Nov 2016) of 52.219-9.

____ (v) Alternate IV (Aug 2018) of 52.219-9.

X (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (JAN 2017) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

X (22) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

____(24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

X (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

X(26) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126).

X (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

X (28)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (Feb 1999) of 52.222-26.

X (29)(i) 52.222-35, Equal Opportunity for Veterans (OCT 2015)(38 U.S.C. 4212).

____ (ii) Alternate I (July 2014) of 52.222-35.

X (30)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUL 2014) (29 U.S.C. 793).

____ (ii) Alternate I (July 2014) of 52.222-36.

X (31) 52.222-37, Employment Reports on Veterans (FEB 2016) (38 U.S.C. 4212).

____ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

X (33)(i) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (35)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (36) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (June, 2016) (E.O. 13693).

____ (37) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (June, 2016) (E.O. 13693).

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) 52.223-16, Acquisition of EPEAT[supreg]-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

X (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

____ (43) 52.223-20, Aerosols (June, 2016) (E.O. 13693).

____ (44) 52.223-21, Foams (June, 2016) (E.O. 13693).

____ (45)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (46) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____ (47) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

(48) 52.225-5, Trade Agreements (AUG 2018) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

X (49) 52.225-13, Restrictions on Certain Foreign Purchases (JUNE 2008) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (50) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (51) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (52) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (53) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

(54) 52.232-30, Installment Payments for Commercial Items (Jan 2017) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

X (55) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (Oct 2018) (31 U.S.C. 3332).

____ (56) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (57) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (58) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

____ (59) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(12)).

____ (60)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

____ (iii) Alternate II (Feb 2006) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

_____ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495).

_____ (2) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____(8) 52.222-55, Minimum Wages Under Executive Order 13658 (DEC 2015) (E.O. 13658).

_____ (9) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (10) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (MAY 2014) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial items. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (Jul 2018) (Section 1634 of Pub. L. 115-91).

(iv) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds $700,000 ($1.5 million for construction of any public facility), the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(v) 52.222-17, Nondisplacement of Qualified Workers (MAY 2014) (E.O. 13495). Flow down required in accordance with paragraph (l) of FAR clause 52.222-17.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sept 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496). Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) X (A) 52.222-50, Combating Trafficking in Persons (JAN 2019) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (Oct 2015) (E. O. 12989).

(xvii)52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

(xviii) (A) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

(B) Alternate I (JAN 2017) of 52.224-3.

(xix) 52.222-62 Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://farsite.hill.af.mil/

252.211-7003 ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause-

Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

Concatenated unique item identifier means--

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

Data Matrix means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

Data qualifier means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

DoD item unique identification means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

Enterprise means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.

Government's unit acquisition cost means--

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

Issuing agency code means a code that designates the registration (or controlling) authority for the enterprise identifier.

Item means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

Lot or batch number means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

Machine-readable means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

Original part number means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

Parent item means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

Serial number within the enterprise identifier means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

Serial number within the part, lot, or batch number means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

Serialization within the enterprise identifier means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

Type designation means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

Unique item identifier means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

Unique item identifier type means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier. (1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract line, subline, or exhibit line item No. Item description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract line, subline, or exhibit line item No. Item description

(If items are identified in the Schedule, insert ``See Schedule'' in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number ----.

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number ----.

(v) Any item not included in paragraphs (c)(1)(i), (ii), (iii), or

(iv) of this clause for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology--International symbology specification--Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that--

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology--EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology-Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall--

(A) Determine whether to--

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: Original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of…