Statement_of_Work.docx

STATEMENT OF WORK

Statement of Work for 200 blade hours of a Commercial Aircraft Review Board (CARB) authorized Skyvan or CASA-212 aircraft for Military Free Fall and Static Line Parachuting by 4th Reconnaissance Battalion for Fiscal Year (FY) 2019.

1.0 Scope. This statement of work (SOW) defines the requirement of 4th Reconnaissance BN for services of 200 blade hours related to Military Free Fall and Static Line Parachuting Techniques to support ongoing worldwide missions. This requirement consists of 200 hours of usable blade hours throughout FY 2019 and usable within 200 miles of these locations: San Antonio, TX 78219; Smyrna, GA 30080; Albuquerque, NM 87117; and Joliet, IL 60436.

2.0 Applicable Documents

2.1 MCO 3120.11A – Marine Corps Parachuting Policy and Program Administration

2.2 TM 70244A-O1 – U.S. Marine Corps Military Free Fall Operations

3.0 Requirements

3.1 Aircraft. The vendor shall provide suitable aircraft rollers, personnel, expendables, required to fly and maintain aircraft on station at training area with multiple drop zones.

3.1.1 The aircraft shall be either the Skyvan or Casa 212 configured for ramp exit.

3.1.2 The aircraft shall be configurable for ramp exit with rollers adequate to support a 500 lbs. barrel while in flight.

3.1.3 The aircraft must be on the AMC carrier list and approved for paradrop operation.

3.1.4 Vendor shall provide suitable 200 blade hours to accomplish the requested training throughout FY-19.

3.1.5 Vendor shall provide one pilot and copilot (as required) that shall remain the same for the duration of training. The pilots shall have no less than (10) years experience flying for military parachute operations.

3.2 Program of Instruction. N/A.

3.2.1 N/A.

3.3 Instructors. N/A

3.3.2. Lead Instructor Qualifications. N/A

3.3.3 Instructor Qualifications. N/A

4.0 Facilities. Facilities shall be within 200 miles of the following locations: San Antonio, TX 78219; Smyrna, GA 30080; Albuquerque, NM 87117; and Joliet, IL 60436. Location shall be agreed upon no later than 35 days before training is to take place.

4.1 CLASSROOM – N/A

4.2 DOD/DOJ – N/A

4.3 DROP ZONE – N/A

4.4 OVERNIGHT STORAGE FACILITY – Vendor shall provide or find suitable storage location

4.5 VEHICLES – N/A

4.6 SAFETY EQUIPMENT – All necessary safety equipment safe flight operations.

5.0 PERIOD OF PERFORMANCE. The contractor shall provide aircraft from 5 December 2018 – 30 September 2019 given at least 35 days notice. Shorter notice requests shall be worked out between vendor and 4th Reconnaissance BN when needed or when available by the vendor if so needed. Flying time and training days shall not exceed 12 hours per day.

7.0 SAFETY/ CLEAN-UP. Training shall be conducted safely utilizing safety procedures for parachute operations in accordance with MCO 3120.11A and TM 70244A-O1. Clean-up shall be conducted by Marines being trained.

8.0 CONTRACTOR FURNISHED EQUIPMENT.

8.1 Aircraft as defined in paragraph 3.1

8.2 Personnel as defined in paragraph 3.1.5,

8.3 Facilities as defined in paragraph 4.

8.4 Fuel arrangements for flight to meet training requirements as defined by the program of instruction.

9.0 GOVERNMENT FURNISHED EQUIPMENT. All parachute systems and oxygen equipment needed for jump operations shall be furnished by 4th Reconnaissance BN.

10.0 GOVERNMENT POINTS OF CONTACT. Contracting Officer Representative shall be provided after contract award.

11.0 SECURITY REQUIREMENTS CLEARANCE VALIDATION- N/A

11.1 MANPOWER REPORTING

5237.102-90 Enterprise-wide Contractor Manpower Reporting Application (ECMRA). The contractor shall report contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for rental of aircraft and pilot. Contracted services excluded from reporting are based on Product Service Codes (PSCs). The excluded PSCs are:

(1) W, Lease/Rental of Equipment;

(2) X, Lease/Rental of Facilities;

(3) Y, Construction of Structures and Facilities;

(4) S, Utilities ONLY;

(5) V, Freight and Shipping ONLY.

The Contractor is required to fill in all required data fields using the following web address https://doncmra.nmci.navy.mil. Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30. While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.