Attachment_3_-_RMHK_Comm_Components_-_Performance_Specification_Matrix.doc
DOC document 67 KB Posted
- Attached to
- Reconnaissance Modular Helmet Kit (RMHK) Communication Components Federal contract opportunity
- Solicitation number
- M67854-15-R-1002
- Issued by
- United States Marine Corps
About this file
RMHK Attachment 3 - Performance Specification Matrix
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| M67854-15-R-1002-0002.pdf | ||
| M67854-15-R-1002-0001.pdf | ||
| M67854-15-R-1002.pdf | ||
| Attachment_1_-_RMHK_Communications_Performance_Specification.pdf | ||
| Attachment_2_-__RMHK_Comm_Components_CDRLs.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 3 – RMHK Comm Components – Performance Specification Matrix
| # |
| Requirement |
| Compliance/Verification |
| State where in your proposal |
Cable A
| 1. |
| 3.1.1.1. Cable. The cable that makes up communications component A shall connect between the MICH HEADSET, HIGH NOISE, W/QUICK DISCONNECT (P/N: SOR1412NB-LE, NSN 5965-01-567-9013) and the MICH MARITIME PTT (P/N: E3-MK-REV3A, NSN 5930-01-517-5400) as a replacement to CABLE, HEADSET QD TO PTT, FSBE (P/N: MK/AP-27A, NSN: 6150-01-517-4963). |
| Demonstrate that Cable A can connect between the MICH HEADSET and the MICH MARITIME PTT. |
| 2. |
| 3.1.1.2. Connectivity. The cable shall allow simultaneous connection of two additional communications components, Communications Components B and C, described below. |
| Demonstrate that Cable B and C are capable of being connected to Cable A. |
| 3. |
| 3.1.1.3. Quick Disconnect. The cable shall disconnect from the MICH HEADSET, HIGH NOISE, W/QUICK DISCONNECT (P/N: SOR1412NB-LE, NSN 5965-01-567-9013) with a single hand, single motion quick disconnect. |
Demonstrate that Communications Cable A can disconnect from the MICH HEADSET, HIGH NOISE, W/QUICK DISCONNECT with a single hand, single motion.
| 4. |
| 3.1.1.4. Environmental Compliance. All connectors shall meet the same environmental standards as the connectors to which they mate and the cable shall be of the same gage as the existing cable components. Manufacturer to provide technical data sheets for all connectors and cables provided. |
| Inspect manufacturer supplied specifications for environmental standards that are compliant with the existing cables. Inspect the manufacturer supplied specifications to ensure the gauge of the cable is the same as the existing cable. |
Cable B
| 5. |
| 3.1.2.1. Cable. The cable shall connect between the parachutist’s O2 mask respirator microphone located on the Parachutist’s High Altitude Oxygen System (PHAOS) Mask (P/Ns: 603810-5, NSN 1670-01-594-9295, 603810-6, NSN 1670-01-594-9296, 603810-7, NSN 1670-01-594-9294 and 603810-8, NSN 1670-01-594-9299) and one of the connectors of Communications Component A described in 3.1.1. |
| Demonstrate that Cable B can connect between the parachutist’s O2 mask respirator microphone and Cable A. |
| 6. |
| 3.1.2.1.1 Connector. The connectors shall be the same on both ends of cable B. |
| Inspect Cable B to verify that the connectors are the same on both ends. |
| 7. |
| 3.1.2.2. Environmental Compliance. All connectors shall meet the same environmental standards as the connectors to which they mate and the cable shall be of the same gage as the existing cable components. Manufacturer to provide technical data sheets for all connectors and cables provided. |
| Inspect manufacturer supplied specifications for environmental standards that are compliant with the existing cables. Inspect the manufacturer supplied specifications to ensure the gauge of the cable is the same as the existing cable. |
Cable C
| 8. |
| 3.1.3.1 Remote PTT. A remote PTT button shall connect to one of the connections of Communications Component A described in 3.1.1 and defined below: |
| Demonstrate that remote PTT can connect to Cable A. |
| 9. |
| 3.1.3.1.1. Manual Operation. The PTT shall be manually operated. |
Demonstrate that the PTT can be manually operated while wearing parachutist gloves.
| 10. |
| 3.1.3.1.2. One Hand Operation. The PTT shall be operable with one hand. |
Demonstrate that the PTT can be operated with one hand while wearing parachutist gloves.
| 11. |
| 3.1.3.1.3. Remote Use. The PTT shall be operable without the parachutist removing their hand from the main or reserve parachute toggles or moving the hand from the standard flight “¼ brakes” position. |
While in the hanging harness, demonstrate that the PTT can be operated without the parachutist removing their hand from the main or reserve parachute toggles or moving the hand from the standard flight “¼ brakes” position.
| 12. |
| 3.1.3.1.4. Gloved Operation. The PTT shall be operable while wearing lightweight to heavyweight parachutist gloves. |
| Demonstrated in 3.1.3.1.1 and 3.1.3.1.2 |
| 13. |
| 3.1.3.1.5. Secure Strap. The PTT shall have a strap to secure PTT switch in the operator’s hand while wearing lightweight to heavyweight parachutist gloves. |
Inspect that there is a strap present to secure the PTT. Demonstrate that the PTT can be secured to the parachutist’s hand while wearing lightweight to heavyweight parachutist gloves.
| 14. |
| 3.1.3.1.6. Cable Length. The PTT cable length shall accommodate the 5th-95th percentile parachutist when the current MICH Maritime PTT is located at the wearer’s front waistline. |
Demonstrate that the remote PTT cable length is appropriate to accommodate the 5th-95th percentile parachutist while wearing the MMPS and the MICH Maritime PTT at the wearer’s front waistline.
| 15. |
| 3.1.3.2. Environmental Compliance. All connectors shall meet the same environmental standards as the connectors to which they mate and the cables shall be of the same gauge as the existing cable components to which they attach. Manufacturer to provide technical data sheets for all connectors and cables provided. |
| Inspect manufacturer supplied specifications for environmental standards that are compliant with the existing cables. Inspect the manufacturer supplied specifications to ensure the gauge of the cable is the same as the existing cable. |
Cable D
| 16. |
| 3.1.4.1. Cable. The cable shall connect to the CABLE, MARITIME 10 PIN PRC 148, FSBE (P/N: MK/MK-48, CAGE: 53283; NSN: 5995-01-517-4231) converting the cable to an Urban PRC 6-pin connector. |
| Demonstrate that Cable D connects to the MARITIME 10 PIN PRC 148 connector, converting the cable to an Urban PRC 6-pin connector. |
| 17. |
| 3.1.4.2. Environmental Compliance. All connectors shall meet the same environmental standards as the connectors to which they mate and the cable shall be of the same gauge as the existing cable components. Manufacturer to provide technical data sheets for all connectors and cables provided. |
| Inspect manufacturer supplied specifications for environmental standards that are compliant with the existing cables. Inspect the manufacturer supplied specifications to ensure the gauge of the cable is the same as the existing cable. |
| 18. |
| 3.1.5.1. Interoperable. The communication components shall be interoperable with the USMC variant/ FSBE MICH Maritime Communications System. |
| Attach the components of the communications cable to the FSBE MICH Maritime Communications System to ensure they are compatible and operable. |
| 19. |
| 3.1.5.2. Parachute Flight Movement. The communication components used with the USMC variant/ FSBE MICH Maritime Communications System shall enable uninterrupted clear communication during parachute flight (movement). |
| Using the hanging harness, demonstrate that the communications system is capable of uninterrupted clear communication during parachute flight (movement). |
| 20. |
| 3.1.5.3. Parachute Landing Transition. The communication components used with the USMC variant/ FSBE MICH Maritime Communications System shall enable uninterrupted clear communication during parachute landing (transition). |
| Using the hanging harness, demonstrate that the communications system is capable of uninterrupted clear communication during parachute landing (transition). |
| 21. |
| 3.1.5.4. Ground Movement. The communication components used with the USMC variant/ FSBE MICH Maritime Communications System shall enable uninterrupted clear communication during ground movement. |
| Demonstrate that the communications system is capable of uninterrupted clear communication during ground movement. |
| 22. |
| 3.1.5.5. Jump Master and Parachutist Communication. The communication components shall allow communication between the jump master and parachutists. |
| Demonstrate that the communications system is capable of communication between the jump master and air crew. |
| 23. |
| 3.1.5.6. Jump Master and Air Crew Communication. The communication components shall allow communication between the jump master and air crew. |
Demonstrate that the communications system is capable of communication between the jump master and parachutists.
| 24. |
| 3.1.6.1. Multi-Mission Parachute System. The communication components shall not interfere with the USMC Multi-Mission Parachute System. |
Using the hanging harness, demonstrate that the communications system does not interfere with the USMC Multi-Mission Parachute System and RMHK components as shown in the configuration below.
3.1.6.2. PHAOS. The communication components shall not interfere with USMC Parachutist High Altitude Oxygen System components.
3.1.6.3 MICH/ACH Helmets. The communication components shall not interfere with the USMC MICH/ACH helmets.
3.1.6.4. RMHK. The communication components shall not interfere with the USMC Reconnaissance Modular Helmet Kit as follows:
3.1.6.4.1. Ops Core FAST Carbon Helmet (P/N 59-99-641 and 59-99-651)
3.1.6.4.2. Ops Core O2 Double Strap Kit (P/Ns 26-99-101 and 26-99-201)
3.1.6.4.3. Ops Core 36mm Goggle Swivel Clips & Shoes (P/N 20-95-103)
3.1.6.4.4. Ops Core 19mm Swivel Clips & Shoes (P/N 20-95-203)
3.1.6.4.5. Norotos NVG Universal Shroud (P/N 1817010)
3.1.6.4.6. Ops Core ACH-ARC with Bungees (P/N 25-99-401)
3.1.6.4.7. Ops Core Custom Cut ACH Velcro Kit (P/N 20-94-001)
3.1.6.4.8. Ops Core H-Nape Retention system (P/Ns 07-99-121 and 07-99-151)
| 25. |
| Delivery Schedule. Offeror shall state their ability to meet the delivery schedule and produce 250 of each cable within 120 days after contract award and 500 of each cable each month until order complete. |
| Offeror’s shall demonstrate in detail their ability to meet the delivery schedule and produce 250 of each cable within 120 days after contract award and 500 of each cable each month until order complete. |
| 26. |
| Manufacturer/Commercial Warranty Provisions. Offeror shall provide a copy of their manufacturer’s/commercial warranty provisions |
| Offeror’s shall provide a copy of their manufacturer’s/commercial warranty provisions. |
File details come from the government source that posted it. Updated .