M67001-15-T-0022_AMEND._2.pdf

CONTRACTING DEPARTMENT

ATTN: ANGELA FERRER

P.O. BOX 8368 MCB

CAMP LEJEUNE NC 28542

SEE SCHEDULE

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment issued to make changes, resulting from site visit on 15 May 2015. Changes made:

-CLIN 0005, 0006 and 0007 are cancelled, striked through in salient characteristics.

-Additional parts are added in CLIN 0030 and CLIN 0031: Muffler to connect to existing system and flexible exhaust tube.

-Text added: SL3 Parts .Added text in salient characteristics.

-Verbiage added in salient characteristics in reference to SL3 parts.

- Solicitation closing date and time is changed to 08 June 2015 closing at 4:00PM EST.

Contract Specialist:

Angela Ferrer

Phone: 910-451-1571

Email: angela.ferrer@usmc.mil

Contracting Officer:

Harold Kostem

Phone: 910-451-1244

Email: harold.kostem@usmc.mil

1. CONTRACT ID CODE PAGE OF PAGES

J 1 11

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 01-Jun-2015

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X M67001-15-T-0022

X 9B. DATED (SEE ITEM 11)

01-May-2015

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

01-Jun-2015

CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

P.O. BOX 8368 BLDG 1116

CAMP LEJEUNE NC 28547-8368

M67001 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE M67001

FACILITY CODECODE

EMAIL:TEL:

M67001-15-T-0022

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SOLICITATION/CONTRACT FORM

The required response date/time has changed from 01-Jun-2015 12:00 PM to 08-Jun-2015 04:00 PM.

SUPPLIES OR SERVICES AND PRICES

CLIN 0005

The CLIN description has changed from Torsionally Resilient Coupling to Torsionally Resilient Coupling

CANCELLED.

The CLIN extended description has changed from Torsionally resilient coupling - Engine-mounted

(Small). BRAND NAME OR EQUAL TO: Mfr: Power Test P/N 43937.3. Refer to attached salient characteristics for extended description. to Torsionally resilient coupling - Engine-mounted (Small). BRAND NAME OR EQUAL

TO: Mfr: Power Test P/N 43937.3. Refer to attached salient characteristics for extended description -CANCELLED.

CLIN 0006

The CLIN description has changed from Drive Shaft Adapter 1610-1410 to Drive Shaft Adapter 1610-

1410 CANCELLED.

The CLIN extended description has changed from Drive shaft adapter - 1610 to 1410. BRAND NAME

OR EQUAL TO: Mfr: Power Test P/N 43942. Refer to attached salient characteristics for extended description. to

Drive shaft adapter - 1610 to 1410. BRAND NAME OR EQUAL TO: Mfr: Power Test P/N 43942. Refer to attached salient characteristics for extended description-CANCELLED.

CLIN 0007

The CLIN description has changed from 1410 Style Double Universal Drive Shaft to 1410 Style Double

CANCELLED.

The CLIN extended description has changed from 1410-Style double universal driveshaft . BRAND

NAME OR EQUAL TO: Mfr: Power Test P/N 43938. Refer to attached salient characteristics for extended description. to 1410-Style double universal driveshaft . BRAND NAME OR EQUAL TO: Mfr: Power Test P/N

43938. Refer to attached salient characteristics for extended description CANCELLED.

CLIN 0030 is added as follows:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0030 1 Each Spare Part- Muffler

FFP

Qty (1)- Muffler (To connect with existing system), with 5 inch diameter connection. Must be compatible with all parts quoted and SL3 items listed in SL3 attachment.

FOB: Destination

SIGNAL CODE: A

NET AMT

CLIN 0031 is added as follows:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0031 1 Each Spare Part- Flexible Exhaust Tube

FFP

Qty (1)- 5 inch diameter, stainless steel, flexible exhaust tube 8-10ft long. Must be compatible with all parts quoted and SL3 items listed in SL3 attachment.

SIGNAL CODE: A

NET AMT

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item has been added to CLIN 0030:

DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

01-AUG-2015 1 2D MLG

SSGT KOHKEMPER, EKHART

GENERAL SUPPORT MAINT CO BLDG.

FC-286

CAMP LEJEUNE NC 28542

910-451-3903

M27128

The following Delivery Schedule item has been added to CLIN 0031:

DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

01-AUG-2015 1 2D MLG

SSGT KOHKEMPER, EKHART

GENERAL SUPPORT MAINT CO BLDG.

FC-286

CAMP LEJEUNE NC 28542

910-451-3903

M27128

INSPECTION AND ACCEPTANCE

The following Acceptance/Inspection Schedule was added for CLIN 0030:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

Destination Government Destination Government

The following Acceptance/Inspection Schedule was added for CLIN 0031:

INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

Destination Government Destination Government

TABLE OF CONTENTS

The below Table of Contents has been added

Exhibit/Attachment Table of Contents

DOCUMENT TYPE DESCRIPTION PAGES DATE

Attachment 1 MS Word

Attachment 10 MS Word

Attachment 11 MS Word

Attachment 12 MS Word

Attachment 2 MS Word

Attachment 3 MS Word

Attachment 4 MS Word

Attachment 5 MS Word

Attachment 6 MS Word

Attachment 7 MS Word

Attachment 8 MS Word

Attachment 9 MS Word

The following have been added by full text:

SL3 PARTS INVENTORY

REQUIRED SL-3 ITEMS THAT ALL QUOTED PARTS MUST BE COMPATIBLE WITH (TURNKEY)

4910-01-459-5619 AIR COMPRESS MODULE EA 1

4910-01-459-5631 AIR STRANGLE SYSTEM KT 1

7125-01-459-6428 STORAGE, CABINET EA 1

4910-01-459-5615 COOLING COLUM KIT KT 1

4130-01-459-6113 COOLING TOWER EA 1

4910-01-458-2741 CRANKSHAFT, ADAPTER KIT KT 1

Powertest Part Numbers (N/A indicates generic items)

11639 HOSE, 8x3” LG EA 2

11638 8” POWER LOCK CLAMP EA 4

11627 WYE 8x6x6 EA 2

11636 HOSE, 6x4” LG EA 2

11639 6” POWER LOCK CLAMP EA 8

11623 HOSE REDUCER, 6” – 5.5”W/CLAMPS EA 4

11622 HOSE REDUCER, 5.5” – 5”W/CLAMPS EA 2

11686 HOSE REDUCER, 5.5” – 4.5”W/CLAMPS EA 2

11686 HOSE REDUCER, 5.5” – 4”W/CLAMPS EA 2

11687 HOSE REDUCER, 5.5” – 3.5”W/CLAMPS EA 2

11687 HOSE REDUCER, 5.5” – 3”W/CLAMPS EA 2

11632 COUPLER, 6” MALE ONLY EA 4

23272 6” PLUG EA 1

11640 HOSE ELBOW 90DEG, 6” EA 2

11641 HOSE ELBOW 45DEG, 6” EA 2

11622 HOSE COUPLER 5.5” – 5.5” W/CLAMPS EA 2

23290 STRANGULATION VALVE ASSEMBLY EA 2

N/A LARGE STORAGE BIN EA 4

N/A MAT EA 1

N/A MEDIUM STORAGE BIN EA 4

N/A SMALL STORAGE BIN EA 6

43377 1 1/2 DISCONNECT COUPLER EA 2

23095.001 3FT COOLING HOSE EA 2

43376 1 5/8 DISCONNECT COUPLER EA 2

23095.002 3FT COOLING HOSE EA 2

43375 1 3/4 DISCONNECT COUPLER EA 2

23095.003 3FT COOLING HOSE EA 2

43374 1 7/8 DISCONNECT COUPLER EA 2

23095.004 3FT COOLING HOSE EA 2

43373 2 DISCONNECT COUPLER EA 2

23095.005 3FT COOLING HOSE EA 2

43372 2 1/8 DISCONNECT COUPLER EA 2

23095.006 3FT COOLING HOSE EA 2

43371 2 1/4 DISCONNECT COUPLER EA 2

23095.007 3FT COOLING HOSE EA 2

43370 2 3/8 DISCONNECT COUPLER EA 2

23095.008 3FT COOLING HOSE EA 2

43369 2 1/2 DISCONNECT COUPLER EA 2

23095.009 3FT COOLING HOSE EA 2

43368 2 5/8 DISCONNECT COUPLER EA 2

23095.010 3FT COOLING HOSE EA 2

43367 2 3/4 DISCONNECT COUPLER EA 2

23095.011 3FT COOLING HOSE EA 2

43366 2 7/8 DISCONNECT COUPLER EA 2

23095.012 3FT COOLING HOSE EA 2

43365 3 DISCONNECT COUPLER EA 2

23095.013 3FT COOLING HOSE EA 2

43364 3 1/4 DISCONNECT COUPLER EA 2

23095.014 3FT COOLING HOSE EA 2

43363 3 1/2 DISCONNECT COUPLER EA 2

23095.015 3FT COOLING HOSE EA 2

43362 3 3/4 DISCONNECT COUPLER EA 2

23095.016 3FT COOLING HOSE EA 2

43361 4 DISCONNECT COUPLER EA 2

23095.017 3FT COOLING HOSE EA 2

43360 4 1/2 DISCONNECT COUPLER EA 2

23095.018 3FT COOLING HOSE EA 2

11611 WYE 4” NPT ALUMINUM EA 1

23255 4” FEMALE QD NPT EA 2

23310 4” MALE QD NPT EA 1

23095.017 4” HOSE, 20’ EA 1

43361 4” QD, MALE EA 2

23093.015 4” CLAMP EA 10

23095.017 4” HOSE, 3” EA 4

23098 4” FEMALE QD, BARBED EA 2

23256 HOSE MENDER 4” EA 2

23093.004 2” HOSE, 20’ EA 1

23309 COUPLE, MALE 2” EA 2

23093.004 2” CLAMP EA 4

43410 WYE SUPPORT BASE EA 1

43411 WYE SUPPORT MID EA 1

43412 WYE SUPPORT TOP EA 1

11320 KNOB EA 3

42416 BRACKET ARM, WYE SUPPORT EA 1

43022 CUMMINS VT-400 EA 1

43024 CUMMINS NCH 250 EA 1

43028 DETROIT DIESEL 8V-92TA 60 SERIES EA 1

43030 DETROIT DIESEL 4-71 N, 7083-7395T, 7083-7396T, 7083-7398T EA 1

43031 DETROIT DIESEL GM 4-53, 4-53, 6V-53, 6V-53-T EA 1

43045 CATERPILLAR 3304DIT, 3306, 306T, D333(C) EA 1

43049 CATERPILLAR 3406 EA 1

43062 CASE 3208 EA 1

43120 CONTINENTAL AVDS-1790-2C, AVDS-1790-2DR, AVDS-1790-XXX EA 1

43151 CASE 6T-5, CUMMINS LARGE RIVER EA 1

43156 DEUTZ-ALLIS 60WATT GEN DEUTZ-ALLIS 350 EA 1

43157 TACOM LD465-1 EA 1

43159 WHITE D-289ER EA 1

43161 GM 6.2L, 6.5L EA 1

43162 JOHN DEERE 6359 EA 1

43202 JOHN DEERE 6076AF EA 1

43208 PERKINS 4.236 EA 1

43265 CATERPILLAR 3116 mechanical EA 1

43232 SABRE ENG. LTD 212 EA 1

43390 NAVISTAR D-190 EA 1

43435 ONAN J EA 1

N/A STAND, MAINT, AUTOMOTIVE ENG EA 1

73083 ENGINE CART EA 1

63116 FRONT SUPPORT EA 1

43037 ENG. MTG. ADAPTER (SAE 0, 1/2 & 1) EA 1

43038 ENG. MTG. ADAPTER (SAE 2, 3 & 4) EA 1

43234 ENG. MTG. ADAPTER (1790 SERIES) EA 1

TORSIONAL COUPLING ADAPTERS

43787 SMALL/SILVER EA 7

44378 MEDIUM/SILVER EA 2

43891 LARGE/SILVER EA 4

TORSIONAL COUPLING

13182 811 FT LB COUPLING (SM) EA 7

14651 1549 FT LB COUPLING (MED) EA 3

13208 2212 FT LB COUPLING (MED) EA 4

CRANKSHAFT ADAPTER

43264 CATERPILLAR C-9, C-12, C-15 EA 4

43292 Drive Shaft adapter, 1810 to 1610 EA 2

43645 CATERPILLAR C-7 EA 7

CHARGED AIR COOLER

24236 CHARGED AIR COOLER UNIT KT 1

13571 HOSE 4”, SILICONE 2-PLY W/ WIRE REIN 6FT LENGTHS EA 2

12808 QD 1’ COUPLER X 1’ NPTF HOT WATER DRAIN HOSE EA 1

13543 QD 3/4" COUPLER X 3/4" NPTF FRESH WATER HOSE EA 1

13136 RUBBER SLEEVE EA 4

13137 RUBBER HOSE REDUCER EA 4

13138 RUBBER HOSE REDUCER EA 4

13139 RUBBER HOSE REDUCER EA 4

13140 RUBBER HOSE REDUCER EA 4

13141 RUBBER SLEEVE EA 4

13143 METAL PIPE EA 4

13144 METAL PIPE EA 2

ENGINE CARTS

73223 FCT DYNO ENG CART EA 2

63326 FRONT SUPPORT EA 2

N/A FABRICATED FRONT SUPPORT EA 3

ENGINE MOUNTING ADAPTER

N/A 6.5 ENGINE COLLAR ADAPTER EA 4

N/A AAV ENG ADAPTER EA 2

BREAKOUT BOXES

63359 CATERPILLAR CONTROL BOX EA 5

63414 DETROIT DIESEL CONTROL BOX EA 2

The following have been modified:

SALIENT CHARACTERISTICS

Dynamometer system and components shall be capable to support the following engines: GM 6.5 turbo & naturally aspirated; Cummins VTA903T525; Detroit Diesel 6V53; Caterpillar 3054C, CAT 3126B, C-7, C-12, C-13:

Cummins V903C, 6T-590, 4B3.9, QSC8.3-C305; QSB4.5T, QSM-11; Cummins-Onan DN4M-1; Yanmar L70AE-

DEGFR; John Deere 4045TF151, 6068TF151, 6090, 6068.

CLIN 1: Qty: 1 - 1000-HP (746kW) WATER BRAKE DYNAMOMETER BASE PACKAGE MFR: POWER

TEST P/N 73509.02

Maximum operating conditions:

• Max Speed: 6,00RPM

• Max Torque: 3,560 ft-lbs

• Capable of operating in either direction of rotation

• Must have power absorption capabilities

• Must have grease lubricated shaft bearings

Dynamometer package must include:

• Inlet Manifold Assembly

• Load Cell and Tach Gear Assembly

• Fabricated Steel Sub-base

• Dynamometer Companion Flange Adapter Assembly

Able to adapt the 1610 drive shaft mounting flange to dynamometer shaft

• Double Universal Drive Shaft

1610 type

Capable of transmitting minimum of 4,000 ft-lbs of torque intermittently

• Drive Shaft Guard

• A data acquisition Base Package featuring

A windows based Computerized control system

Computer/monitor/printer to control and monitor at a minimum: speed, torque, horsepower

At a minimum (4) temperature sensors w/ thermocouple type K with extension cables and fittings

At a minimum (2) pressure transducers 0-250 PSI

Must have engine start/stop relays for remote starting, stopping and auto-shutdown

Must have programmable automated run patterns

Must produce operator customized, full-featured data reports

Must have Ethernet connection between control system, computer and other available accessories

Must include cables for throttle actuator and Ethernet

• Throttle actuator system for data acquisition package

• Pneumatic Load Control System

• Wheeled engine Cart System shall be capable to support listed engines.

Steel guide angles and lock pins to align and secure cart

Universal Front support for adjusting fan-end height

Rear support for automatically locating the flywheel housing bolt-circle mounting adapters

Flywheel housing adapters for engines having SAE bolt patterns sizes #1 to #4

• Torsional Coupling, Engine Mounted, upto 900 ft-lb

For engines up to 900 Ft-lb of torque

Ability to mount to SAE 620 11 ½” Fly wheel directly.

Must include adapter plate to allow connection to 1810 pattern crankshaft or flywheel style adapters

Must be compatible with 1610 driveshaft

• Engine Cooling Column

Shall be rated to support the required listed engines; not to exceed 1000 HP rating.

Thermostatically controlled by an operator set point between 0-15PSI

CLIN 2: QTY: 1 - AIR-STARTING SYSTEM MFR: POWER TEST P/N 63301.01

Dynamometer mounted pneumatic starter, flywheel, and ring gear assembly

Must include Safety guards and relay control valves

Must allow remote operation from data acquisition computer.

SAE standard rotation

Must be rated for the listed engines displacing

Must be supplied with Required air compressor, air tank and air regulator to safely and effectively use air starting system

CLIN 3: QTY: 1 - CHARGE AIR-COOLING SYSTEM SIMULATOR 1,000-HP MFR: POWER TEST P/N

24236

Must provide digital temperature control of charge air outlet from 90-250°F (32-121°C)

LED temperature and set-point display

Copper construction for use with systems that use straight water or a glycol mix

Sized to support listed engines.

Less than 1.5-Psi (10.3 kPa) pressure drop with a 1,000-HP (746 kW) engine

Maximum allowable air inlet temperature of 450°F (232°C) at 45-Psi (310 kPa)

System must cool inlet air to within 20 degrees of cool water temp

115V-AC, 60 Hz operation

CLIN 4: QTY: 1 - CHARGE AIR COOLER HOSE KIT MFR: POWER TEST P/N 23671.2

Two (2) 4" Diameter Silicone hoses X 144" long

Two each of the following reducers or adapters: 4x4, 4x3, Stepped silicone hose: 4x4, 4x3.5, 4x3, 3x2.5, 3x2, 3x3

Two (2) each T-bolt style hose clamps (range in inches): 1.75 x 2.25, 2.38 x 2.75, 2.87 x 3.25, 3.25 x 3.75, 8 each of 3.75 x 4.25

CLIN 5: QTY: 1 - TORSIONALLY RESILIENT COUPLING - ENGINE-MOUNTED (SMALL) MFR:

POWER TEST P/N 43937.3

For use diesel engines up to 288 ft-lb of torque

Must include a dapter plate to allow connection to 1410 pattern crankshaft/adapters

Can be direct mounted to a SAE J620, 8" Flywheel

CLIN 6: QTY: 1 - DRIVE SHAFT ADAPTER - 1610 TO 1410 MFR: POWER TEST P/N 43942

Must connect 1410 style drive shaft to resilient coupling flange (1610)

CLIN 7: QTY: 1 - 1410-STYLE DOUBLE UNIVERSAL DRIVESHAFT MFR: POWER TEST P/N 43938

Capable of transmitting 1,500 ft-lbs (2,034 Nm) of torque intermittently

CLIN 8: QTY: 1 - WATER PRESSURE REGULATION SYSTEM (2") WILKINS MFR: POWER TEST

P/N 63248

Adjustable regulator valve

CLIN 9: QTY: 1 - SERVO INLET MANIFOLD PTX MFR: POWER TEST P/N 73123.02

2" Dynamometer mounted servo load control valve with servo motor

For use with Power Net or Power Net LT

CLIN 10: QTY: 1 - SERVO VALVE INTERFACE FOR DATA ACQUISITION BASE PACKAGE MFR:

POWER TEST P/N 43929

When interfaced with data acquisition, must allow closed loop control to any specified torque, speed, HP or valve position for automated or manually controlled testing

Power and feedback cables to servo valve shall be of enough length to safely connect required components.

CLIN 11: QTY: 1 - ECM INTERFACE FOR DATA ACQUISITION BASE PACKAGE MFR: POWER

TEST P/N 43802.3

Allows electronic engine performance data, conforming to SAE J1587, J1708, and J1939 protocols, to be monitored, displayed, and recorded by the data acquisition base package

CLIN 12: QTY: 1 - DC POWER SUPPLY MFR: POWER TEST P/N 63778

Must supply 12 & 24 Volt DC for engine ECM's, fuel pumps, solenoids and air strangulation system

Input 100-240VAC, 5 AMPS, Output 12 or 24 VAC, 22 AMPS with Visual Indicators of Selection

Interconnects to DC relay in data acquisition base package system

CLIN 13: QTY: 1 - BREAKOUT BOX - CUMMINS CELECT MFR: POWER TEST P/N 63395

Must allow for the operation of electronically controlled engines when engine is removed from vehicle

CLIN 14: QTY: 1 - ECM CABLE SAE J1798 & J1939 9 PIN MFR: POWER TEST P/N 44091.025

ECM cable shall be of sufficient length to safely run from test cell to control room.

CLIN 15: 43739.1 QTY: 1 - TEMPERATURE AND PRESSURE EXPANSION MODULE FOR DATA

ACQUISITION BASE PACKAGE

Additional four (4) temperature and two (2) 0-250 psi (0-1,724 kpa) pressure input channels along with sensors and connections

CLIN 16: QTY: 1 - PRESSURE EXPANSION MODULE FOR DATA ACQUISTION BASE PACKAGE

MFR: POWER TEST P/N 43730.1

Additional four (4) pressure input channels along with sensors and connections

Pressure sensors (Two 0-250Psi / 0-1724 kPa, one 0-5Psi/33kPa, and one -15 to +15Psi/-100 to +100 kPa)

CLIN 17: QTY: 1 - POWER CORRECTION FACTOR SOFTWARE MFR: POWER TEST P/N 11948

Must allow automatic data correction of measured data to corrected values based on ambient temperature.

Must Conform with the following standards: SAE J1995/J1394, SAE J607, DMWR and CAT

CLIN 18: QTY: 1 HUMIDITY AND BAROMETRIC SENSOR ADD-ON FOR DATA ACQUISITION BASE

PACKAGE MFR: POWER TEST P/N 43861.1

To be used for data gathering/analysis by CLIN 16 Power Corrections Factor Software.

CLIN 19: QTY: 1 - ENGINE MOUNTING KIT, GM 6.2/6.5 MFR: POWER TEST P/N 43763.2

Engine adapter, rear upper yoke & front engine supports used to adapt Wheeled engine Cart System to mount GM 6.2/6.5 engine

CLIN 20: QTY: 2 THROTTLE PULLEY KIT - GM 6.2/6.5 ENGINES MFR: POWER TEST P/N 43906

Engine mounted pulley kit to adapt dynamometer Throttle actuator system to operate engine fuel pump.

CLIN 21: QTY: 1 - WATER TO OIL HEAT EXCHANGER (TO SIMULATE EXTERNAL OIL COOLER

ON GM 6.2/6.5 ENGINES) MFR: POWER TEST P/N 43903

Thermostatically Controlled water flow

Shell & Tube style heat exchanger mounted on dynamometer system

Must include quick disconnect fittings for oil side

Must include 3/4" Hose barb fittings for water inlet and outlet

CLIN 22: QTY: 1 - OIL-SIDE HOSE KIT FOR ABOVE LISTED HEAT EXCHANGER MFR: POWER

TEST P/N 24000

Must include #10 JIC female fittings, for direct connection to Quick Disconnect Fittings

Must include two sections of 6-ft long hose for oil flow, to connect to Quick Disconnect

CLIN 23: QTY: 1 - FLEXIBLE EXHAUST "Y", 3", 3-BOLT 6.2/6.5 MFR: POWER TEST P/N 23652

CLIN 24: QTY: 2 - EXHAUST ADAPTER 6.2/6.5 TURBO MFR: POWER TEST P/N 23800

CLIN 25: QTY: 2 - HOSE KIT - FUEL CONN GM 6.2/6.5 MFR: POWER TEST P/N 24110.002

2 ft. long hose to connect supply and return engine ports to the fuel tank supply and return hoses

Must include quick disconnect fitting to connect to fuel tank hoses

CLIN 26: QTY: 1 - COOLING COLUMN INTERCONNECT KIT) MFR: POWER TEST P/N 63377.3

Must include two (2) each hose sizes X 3 feet long: 1.75, 2.125, 2.25, 2.38, 2.5, 2.62, 2.75, 3.0; Four (4) each 2.0" ID hose by 3 feet long (Note: inside diameter in inches)

Must have T-bolt style hose clamps for each hose (2 each end) (84 total pcs)

Hose quick coupling adapter for both ends of each hose size

One piece: 2" Aluminum Wye connection with quick disconnects for dual cooling water return systems

1" ID cooling column supply hose and 2.0" ID drain hoses included (Both 10 ft. long)

Includes wall mounted hose rack or cabinet for hose storage

CLIN 27 QTY: 2 - QD 2" COUPLER TO 3" NPTM AL: MFR: POWER TEST P/N 13494

CLIN 28: SYSTEM EQUIPMENT INSTALLATION SERVICES

Facility installation planning, pre-construction site meeting, on-site supervision

Uncrate, position and Installation of above listed Dynamometer system and stationary equipment options.

Plumbing: Connection of water supply to Dynamometer, Water Pressure Regulation System, Engine

Cooling Column, Charge Air Cooler, Oil Cooler. Provide and install new iron piping (threaded connections) as required in test cell for all required water supply and drain connections. Quick-Disconnect

(QD) water hose connections to Dynamometer Engine Cooling Column supply and drain. QD / flex hose water connections to Oil Cooler and CAC10 supply and drain.

Electrical: Install and connect data acquisition control system, Servo load control, DC Power Supply, Outlets (as required) for CAC10 and portable fuel day tank. Route data acquisition communications cable overhead between data acquisition sensor box and Station PC.

Customer responsible for offload and storage of materials prior to installation, all existing equipment removal/demolition per per-construction site visit, dumpster for debris, forklift and operator for positioning of equipment, etc.

All aspects of installation will be completed in 3 days.

CLIN 29: TRAINING.

Contractor shall provide a factory representative on-site to provide commissioning and training. Training should coincide with completion of the 3 days utilized for installation. Training shall be sufficient and the customer should have a general understanding of the operation of new system and equipment.

Included in this line item: includes cost of airfare, travel visas, ground transportation, meals, and lodging expenses in accordance with Defense Travel Regulations. This line item shall be quoted as a firm fixed price with no variable or extra costs.

CLIN 30 QTY: 1 SPARE PARTS -MUFFLER

Muffler (To connect with existing system), with 5 inch diameter connection.

Must be compatible with all parts quoted and SL3 items. See salient characteristic text.

CLIN 31 QTY: 1 SPARE PARTS –FLEXIBLE EXHAUST TUBE

5 inch diameter, stainless steel, flexible exhaust tube, 8-10 inch long.

Must be compatible with all parts quoted and SL3 items. See salient characteristic text.

SL3 PARTS: THESE PARTS ARE CURRENTLY ON HAND, ALL PARTS QUOTED BRAND NAME OR

EQUAL TO POWER TEST SHALL BE COMPATIBLE WITH ALL PARTS QUOTED (TURN KEY) AND

THE ITEMS LISTED IN SL3 PARTS ATTACHEMENT.

(End of Summary of Changes)