LWIR.MWIR SOW FEB 20.pdf
PDF 96 KB Posted
- Attached to
- Multispectral Cameras Federal contract opportunity
- Solicitation number
- FA860121Q0044
About this file
This document outlines requirements for two multispectral imaging systems. The first section specifies the minimum requirements for a Medium Wave Infrared (MWIR) multispectral imager, including an InSb detector, 1.5-5.5um spectral range, 640x512 resolution, 25um pitch, 800Hz full frame rate, 40,000Hz subframe rate, 25mK NETD, and eight filter bands. The second section lists identical requirements for a Long Wave Infrared (LWIR) multispectral imager but with a 7.5-11.5um spectral range and SLS detector. Both systems must operate from -15 to 50 degrees C. Delivery to the Air Force Institute of Technology is required within 180 days of award.
The related federal contract opportunity is solicitation FA860121Q0044 for the supply of multispectral cameras meeting the Statement of Work requirements. Proposals are due by March 31, 2021. The award will be a fixed-price contract for commercial items to the offeror meeting acceptability standards and having the lowest price. The Department of the Air Force Materiel Command Lifecycle Management Center at Wright Patterson Air Force Base is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation Amendment FA860121Q00440001 SF 30.pdf | ||
| LWIR.MWIR 3.19.pdf | ||
| FA860121Q0044.pdf | ||
| Brand name MWIR printed_Redacted.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MINIMUM REQUIREMENTS
FOR A
MWIR MULTISPECTRAL IMAGER\
LWIR MULTISPECTRAL IMAGER
02 FEB 21
GENERAL
The following specification lists the minimum (threshold) requirements for a Medium Wave Infrared (MWIR) Multispectral Imager:
1. Detector type InSb
2. Spectral range: 1.5 m-5.5 m
3. Spatial resolution: 640 x 512 pixels
4. Detector pitch: 25m
5. Frame rate (full frame with filter wheel): 800 Hz
6. Frame rate (64 x 8 sub frame): 40,000 Hz
7. Typical Noise Equivalent Temp Difference: 25 mK
8. Scene temperature range: Up to 1500 degrees C
9. Filter bands: 8
10. Operating temperature range: -15 degrees C to 50 degrees C
The following specification lists the minimum (threshold) requirements for a Long Wave Infrared (LWIR) Multispectral Imager:
1. Detector type SLS
2. Spectral range: 7.5 m-11.5 m
3. Spatial resolution: 640 x 512 pixels
4. Detector pitch: 25m
5. Frame rate (full frame with filter wheel): 800 Hz
6. Frame rate (64 x 8 sub frame): 40,000 Hz
7. Typical Noise Equivalent Temp Difference: 25 mK
8. Scene temperature range: Up to 1500 degrees C
9. Filter bands: 8
10. Operating temperature range: -15 degreesC to 50 degreesC
PERIOD OF PERFORMANCE
The Air Force Institute of Technology (AFIT)—shall receive all components within 180 days of contract award.
DELIVERY
The contractor shall deliver in accordance with Section F Delivery/ Performance of the award.
DELIVERY PROCEDURES – COMMERCIAL VEHICLES
All vehicles larger than a large pick-up truck are required to be inspected by the Wright- Patterson Air Force Base Commercial Vehicle Delivery Gate (CVDG) prior to entering the Installation.
Vehicles to be inspected include, but are not limited to, the following:
- Step van/panel truck
- Tractor/trailer, box and flat-bed containing cargo
- Tanker trucks
- Box trucks
- Tour buses
- Garbage/recycled waste trucks
- Concrete trucks/mixers, dump trucks
- Cranes, recreational vehicles, petroleum tanker
This inspection will be conducted at Gate 26A located off State Route 235. The following are exemptions to vehicles utilizing the CVDG:
- If the vehicle has the product inside (concrete and asphalt trucks) and timely delivery is necessary due to product deterioration, it does not need to enter the CVDG. To bypass the CVDG, the contractor shall submit a list containing drivers’ names, social security Numbers, and the state in which the driver's license is held for those drivers who will be entering the base. This shall be accomplished 24 hours prior to requested entry time. If entry is requested on Monday, this list must be submitted by Friday at 1630 hours. All lists shall be submitted to the 88th ABW/CE Directorate contract inspector. The only gates that may be used under this exemption shall be 15A, 26A, 38A, and gate 1B. If the driver's name is not on the list, he/she will not be allowed access to the installation through these gates and the base will not assume liability for denied access.
- If a delivery vehicle must exit, and then re-enter the base to complete its route, the vehicle shall be resealed upon exiting the base. After initially passing through the commercial vehicle delivery gate, trucks shall be resealed at Gates 15A, 38A and 22B. The resealing of the trucks will allow them to continue to any other area of the installation (Areas A, B, or Kittyhawk) without reprocessing through the CVDG. To receive resealing assistance, the drivers shall physically stop at one of the three authorized gates and request the installation entry controller to reseal their truck and provide the next location of their delivery. The controller will reseal the truck and give the delivery driver a pre-clearance form. The driver shall present the pre-clearance form to the entry controller at the next point of installation entry. This reentry can be through any base gate.
Vehicles may be subject to an inspection at any of installation entry control points during a directed random antiterrorism measure (RAM). Any commercial vehicle, regardless of size, can be directed to the CVDG at the discretion of the installation entry controller.
WARRANTY
Free from defects in material and workmanship, under normal and proper use in accordance with equipment user manual, for the period of time of three years after receipt.
PAYMENTS
100% payment after delivery.
File details come from the government source that posted it. Updated .