Letter RFP SPRTA1-25-Q-0273.pdf

MEMORANDUM FOR: Ryan Miller / RTX Corporation d/b/a Pratt & Whitney

FROM: DLA Aviation – AOAA / 3001 Staff Dr., 2B95 / Tinker AFB, OK 73145

SUBJECT: Letter Solicitation SPRTA1-25-Q-0273

This Solicitation is issued for the purpose of acquiring the Seal, Air Aircraft G, NSN: 2840-01-205-7555NZ; PN:4061976

CLIN P/N NSN Noun Quantity 0001 4061976 2840-01-205-7555NZ Tube Assembly, Metal 15 each

Please provide pricing and delivery for purchase of this NSN in accordance with the terms and conditions of SPE4A1-21-G-0001.

Pratt & Whitney is requested to provide capacity, PLT and pricing based upon the quantity listed below.

Required Quantity: 15 each

IUID APPLIES: DFARS 252.211.7003

Critical Safety Item (CSI): YES

Inspection: Origin Acceptance: Origin Inspection/Acceptance Report: Receiving Report Required.

Quality Assurance: Higher Level Contract Quality Requirements, ISO 9001:2008 Buy American Act/balance of Payments Program

Requested Delivery: 15 each on or before 15 AUG 2025

Ship to:

CLIN 0001 – SW3211

The terms and conditions of SPE4A1-21-G-0001 will apply to this NSN. Please respond with your pricing and delivery for the item by the solicitation closing date of 28 APRIL 2025. If you have any further questions, please contact David Todd Isaac at david.isaac.4@us.af.mil.

Sincerely, //SIGNED//

David Todd Isaac Contacting Specialist

ATTACHMENTS:

NOTE 1 – Packaging to be accomplished IAW the Packaging Requirements documents attached.

NOTE 2 - Transportation to be accomplished IAW the applicable Transportation documents attached.

NOTE 3 – IUID Checklist

DEFENSE LOGISTICS AGENCY

AVIATION AT OKLAHOMA CITY

3001 STAFF DRIVE POST 2B95

TINKER AIR FORCE BASE, OKLAHOMA 73145-3015

28 MAR 2025

mailto:david.isaac.4@us.af.mil

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20302500134-00 VERSION: 1

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAA MIL Long Line Packaging MIL B

ITEM(S):

2840012057555NZ

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

UNIT PACK

LENGTH

UNIT PACK

WIDTH

UNIT PACK

DEPTH

UNIT PACK

CUBE OPI

1 000 33 1 00 GB NA B ED 00 B 17 6.00 20.5 20.5 6.5 1.580 O

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Davis, Richard R

PHONE NUMBER:

405-371-9037 / 582-5972

SIGNATURE:

//SIGNED//Davis, Richard R

DATE:

24225 - 12 AUG 2024

Page 1 of 1AFMC 158 Version 1Generated by PRPS using Jasper Reports on 13 Aug 2024

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20302500134-00

DATE INITIATED:

12 AUG 2024

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 Freight Classification Description 52.247-53 Marking of Shipments 47.305-10 Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 97X4930.FC04 644 47GT 15380N 01N000 00000 000000 503000 F03000 FSR: 013352 PSR: K35164

First Destination Transportation Account Code: FRS2

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA:

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 2840012057555NZ

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): SW3211

Mark For: Acct 09

Ship To (Address): DLA DISTRIBUTION DEPOT OKLAHOMA

TINKER AFB OK 73145-8000

TINKER AFB OK

73145 - 8000

USA

WPOD:

APOD:

BBP / CCP:

RIC: 1

Requisition Number:

Supplemental Address:

FMS Case:

3301 F AVE CEN REC BLDG 506 DR 22

Ship To (Remarks):

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

NAME

Langford, Dorothy A

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-327-6593 / 497-6593

SIGNATURE

//SIGNED//Langford, Dorothy A

DATE

12 AUG 2024

Page 1 of 1DD FORM 1653 Version 1Generated by PRPS using Jasper Reports on 13 Aug 2024

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (i) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

2840012057555NZ

VERSION NUMBER

NOUN

SEAL,AIR,AIRCRAFT G

INITIATOR

Riffle, Anthony C

ORGANIZATION CODE / OFFICE SYMBOL

AFLCMC / LPSB

COMMERCIAL PHONE

405-736-3006

DSN PHONE

736-3006

CAGE / REFERENCE NUMBER

77445 / 4061976

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Bag/Tag

MARKING METHOD

BAG/TAG

DESCRIPTION / LOCATION

Bag and Tag

REMARKS

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2840012057555NZ

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

REMARKS

ATTACHMENT(S)

Page 1 of 1IUID Version 3Generated by PRPS using Jasper Reports on 13 Aug 2024