Sol_L15PS00458.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

LDA

BOISE ID 83709

1387 S. VINNELL WAY

BLM ID STATE OFC HR&ADMN (ID953)

0004276377 CODE 16. ADMINISTERED BYCODE

X

X

X

332420

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED ORLDA

RFPIFB

10. THIS ACQUISITION ISCODE

RFQ

14. METHOD OF SOLICITATION

13b. RATING

NAICS:

SMALL BUSINESS

06/05/2015 1200 MD

05/26/2015

(208) 373-3910Patricia A Fort (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

L15PS00458

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 2 0040213321OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

POCATELLO ID 83204

4350 CLIFFS DRIVE

BLM-ID POCATELLO FIELD OFFICE

15. DELIVER TO

BOISE ID 83709

1387 S. VINNELL WAY

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

11.

SEE SCHEDULE

12. DISCOUNT TERMS

THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

8(A)

BLM ID-STATE OFC HR&ADM SVC (ID953)

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Delivery: 08/11/2015

00010 24'Vertical Water Storage Tank 1 EA

Period of Performance: 06/10/2015 to 08/11/2015

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

XX

DATED

Patricia A Fort

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

OFFER

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT:

REF.

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 2/2012) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

2 2 of

This is a combined Synopsis/Solicitation for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation;

proposals are being requested and a written solicitation will not be issued. Firm, fixed-price quotes are requested under Request for Quotation (RFQ) Solicitation number L15PS00458. This document incorporates provisions and clauses which are in effect through Federal Acquisition Circular (FAC) 2005-82. This solicitation is set-aside for small business under North American Industry Classification System (NAICS) code 332420. The small business size standard for a concern which submits an offer in its own name, other than on a construction or service contract, but which proposes to furnish a product which it did not itself manufacture, is 500 employees.

The line item number is: 13125 (01) Vertical Water Storage Tanks per the specifications below, Quantity 1 Each.

Delivery to: Vard Neal 9701 S 24000 W Malad City, ID 83252

This solicitation is "All or None"

Deliver Date: 60 Days after award.

Note: Contractor will notify BLM at (208) 478-6388 three (3) business days prior to delivery. Delivery must be made before 4:00 p.m. Mountain Daylight Time.

F.O.B. Point: Destination

Usage Tax: Quotes must include all Federal, State usage, and local taxes.

SPECIFICATIONS

SECTION 13215 - VERTICAL WATER-STORAGE TANKS

PART 1 - GENERAL

1.1 SUMMARY

A. Description of Work: This section includes furnishing and delivering one 30-60 mil flexible PVC (NSF61) lined steel water storage tank with roof center hatch cap, inspection hatch access, side and roof ladder systems and other appurtenances necessary to complete the water storage tank. The capacity shall be approximately 45,000 to 48,000 gallons. Shall also include the insulation package necessary for installing the liner and Engineers drawings signed and sealed by a qualified Idaho Professional Engineer.

B. Location: Delivery for this contract is located in Oneida County, and to the address of VARD NEAL, 9701 S 24000 W, STONE, IDAHO 83252 as per map drawings. Google map list the address as 9701 S 24000 W, Malad City, Idaho.

1.2 DEFINITIONS

A. Reservoir: Flat-bottomed, cylindrical, surface water-storage tank with shell height equal to or less than its diameter.

B. Standpipe: Flat-bottomed, cylindrical, surface water-storage tank with shell height greater than its diameter.

C. PVC: Polyvinyl chloride plastic.

1.3 PERFORMANCE REQUIREMENTS

A. Structural Performance: Surface water-storage tank, including structural reinforcement and foundation, shall be capable of withstanding the effects of dead and live gravity loads and winds of 110 mph.

B. Seismic Performance: Surface water-storage tank, including structural reinforcement and foundation, shall be capable of withstanding the effects of earthquake motions in seismic category C and determined according to authorities having jurisdiction.

C. Thermal Movements: Surface water-storage tank, including structural reinforcement and foundation, shall allow for thermal movements resulting from the following maximum change (range) in ambient and surface temperatures by preventing buckling, opening of joints, overstressing of components, failure of connections, and other detrimental effects. Base engineering calculations on surface temperatures of materials due to both solar heat gain and nighttime-sky heat loss.

1. Temperature Change (Range): -30 degrees Fahrenheit to 180 degrees Fahrenheit material surfaces.

1.4 SUBMITTALS

A. Product Data: Include rated capacities, accessories, appurtenances, and furnished specialties for each surface water-storage tank indicated.

B. Shop Drawings: Signed and sealed by a qualified Idaho Professional Engineer. Show fabrication and installation details for each surface water-storage tank, including the following:

1. Tank, roof, and shell openings.

2. Safety railings and ladders.

3. Plans, elevations, sections, details, and attachments to other work.

4. Structural analysis data signed and sealed by the qualified professional engineer responsible for their preparation.

5. Power, signal, and control wiring.

C. Welding Certificates.

D. Qualification Data: For fabricator.

E. Bacteriological Test Results.

F. Field Quality-Control Test Reports.

G. Operation and Maintenance Data: For the following to include in emergency, operation, and maintenance manuals:

1. Obstruction lighting.

2. Lightning protection.

3. Cathodic protection.

4. Tank heaters.

1.5 QUALITY ASSURANCE

A. Fabricator Qualifications: Employ a qualified structural engineer to prepare calculations, Shop Drawings, and other structural data for fabrication and erection of surface water-storage tanks.

1. Engineering Responsibility: Preparation of data for surface water-storage tanks, accessories, specified appurtenances, and concrete supports and foundations, including Shop Drawings, based on testing and engineering analysis of manufacturer's standard units in assemblies similar to those indicated for this Project.

B. Welding: Qualify procedures and personnel according to the following:

AWS D1.1/D1.1M Structural Welding Code--Steel AWS D1.3 Structural Welding Code--Sheet Steel AWS D1.4 Structural Welding Code--Reinforcing Steel

C. Pipe Welding: Qualify procedures and personnel according to ASME Boiler and Pressure Vessel Code:

Section IX, "Welding and Brazing Qualifications."

D. Electrical Components, Devices, and Accessories: Listed and labeled as defined in NFPA 70, Article 100, by a testing agency acceptable to authorities having jurisdiction, and marked for intended use.

E. Comply with AWWA D103, "Factory-Coated Bolted Steel Tanks for Water Storage," and with AWWA M42, "Steel Water-Storage Tanks," for bolted-steel, surface water-storage tanks.

F. Comply with ASTM American Society for Testing and Materials 100 Barr Harbor Dr., West Conshohocken PA 19429-2959

ASTM A 123 REV A-89 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products ASTM A 526/A 526 M-90 Steel Sheet, Zinc-Coated (Galvanized) by Hot-Dip Process, Commercial Quality ASTM A 53 REV B-90 Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless

PART 2: PRODUCTS

2.1 BOLTED-STEEL STORAGE TANK RESERVOIR

A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following:

B. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

1. American Tank Company, Inc.; Bolted Tank Sales and Service.

2. Columbian TecTank.

3. Engineered Storage Products Company.

4. Pittsburg Tank & Tower Co., Inc.

5. Superior Tank Co., Inc.

6. SCAFCO Grain Systems Co.

7. National Storage Tank, Inc.

8. Water Storage Tanks, INC (CORGAL TANKS)

C. Description: Bolted-steel plates, bolts, rods, and reinforcing steel; designed and fabricated according to AWWA D100 and AWWA M42.

1. Capacity: 45,000 TO 48,000 Gal.

2. Shell Roof: Comply with AWWA D103.

3. Reservoir Shell Diameter: maximum 24 ft.

4. Flexible PVC liner for suspension inside the water tank to form a water-tight membrane.

5. Roof Inspection Hatch: Steel, hinged cover, 18 by 24 inches minimum with 4-inch minimum neck and 2-inch minimum downward overlap with hasp and lock, located over interior ladder and adjacent to exterior ladder.

6. Roof Center Hatch Manhole Cap: Steel, removable, 20 inch minimum-diameter cover with 4-inch minimum neck and 2-inch minimum downward overlap with hasp and lock. Construct opening with capability of supporting ventilation fan.

7. Bolts, Nuts, Washers, and Expansion Sleeve Inserts: Heat Treated, Stainless steel or equivalent coated or plated weather resistant material.

8. Heavy Duty Anchor System-designed to resist horizontal loads.

2.2 DELIVERY. STORAGE AND HANDLING

A. Delivery: Protect products incorporated into the work from damage while in transit to the site. Products must be delivered in original unopened containers with manufacturer's name, brand designation, and contents legibly indicated. The containers shall bear the referenced specification number, type, and class as applicable.

B. Handling: Load and unload products protecting them from damage.

C. Inspection: Products shall be inspected by the contracting Officer before unloading for damage and as a quantity check compared to invoice.

PART 3: EXECUTION

3.1 WARRANTY

A. Requirements: Materials and equipment furnished under this Contract shall be covered by the most favorable commercial warranties given to customers for such materials or equipment. The rights or remedies provided herein are in addition to and do not limit rights afforded to the Government by other clauses of this Contract.

With respect to warranties, expressed or implied, from manufacturers or suppliers for materials or equipment furnished under the Contract the Contractor shall:

1. Obtain warranties that would be given in normal commercial practices.

2. Require warranties to be executed, in writing, for the benefit of the Government.

3. Submit warranties to the Contracting Officer prior to the final inspection.

END OF SECTION 13215

The following provisions and clauses apply to this procurement: FAR 52.212-1 Instructions to Offerors - Commercial Items; FAR 52,212-2, Evaluation-Commercial Items is applicable, and the following shall be included in paragraph (a) of this provision. Quotes will be evaluated on past performance, and price listed in descending order of importance. Past performance will be based on the Contracting Officer’s knowledge, contacting provided references, and other reasonable sources. FAR 52.212-3 Offeror Representations and Certifications - Commercial Items; FAR 52.212-4 Contract Terms and Conditions - Commercial Items; FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Items (paragraph (b) following clauses apply; FAR 52.219-6; FAR 52.222-3; FAR 52.222-21; FAR 52.222-22; FAR 52.222-26; FAR 52.222-36; FAR 52.225-1; FAR 52.232-33); (paragraph (c) following clauses apply; FAR 52.204-7 System for Award Management; FAR 52.204-16 Commercial and Government Entity Code Reporting; FAR 52.204-17 Ownership or Control of Offeror; FAR 52.204-19 Incorporation by Reference of Representations and Certifications; FAR 52.211-5 Material Requirements; FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies; 52.222-55, Minimum Wages Under Executive Order 13658; FAR 52.223-3 Alt. 1 Hazardous Material Identification and Material Safety Data; FAR 52.223-6 Drug-Free Workplace; FAR 52.223-18 Encouraging Contractor Policies to Ban Text Messaging while Driving; FAR 52.242-15 Stop-Work Order. The full text of these provisions and clauses may be accessed electronically at http://www.acquisition.gov/far or upon request to the Contracting Officer.

Quotes shall be submitted in writing on company letterhead and must include the RFQ number, the company name, point of contract, address, phone number, fax number, DUNS number, the delivery period in terms of the number of days, the unit price, the extended price. Offers are due to the BLM, Idaho State Office, 1387 S Vinnell Way, Boise, ID 83709 by 12:00 Noon MST, June 5, 2015. All questions regarding this requirement shall be directed to the contracting officer at

(208) 373-3910 or by email to pfort@blm.gov.