JOTFOC - 70Z08521P40026B00.pdf

120 KB Posted

Attached to
Cooler, Fluid, Industrial
Solicitation number
70Z08521Q40026B00
Issued by

View the file

Other files

File Type Posted
FBO SHIPPING REQUIREMENTS.docx DOCX document
RFQ 70Z08521Q40026B00.docx DOCX document
FAR Clauses - 70Z08521P40026B00.pdf PDF
FBO PAYMENT TERMS.docx DOCX document

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

PROJECT/TASK

NUMBER

CODE

ONE LEVEL ABOVE CONTRACTING OFFICER TELEPHONE NUMBER DATE

SIMPLIFIED ACQUISITION PROCEDURES (SAP)

JUSTIFICATION FOR OTHER THAN FULL AND OPEN COMPETITION (J&A)

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE. THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER. WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE, THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENT’S REQUIREMENT. STATEMENTS SUCH AS “ONLY KNOWN SOURCE” OR “ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE” ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE. THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:

PURCHASE REQUEST OR REQUISTION NUMBER ESTIMATED AMOUNT (OVER $3,000 BUT NOT EXCEEDING $150,000)

BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED, AND THE INTENDED USE

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE, WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED.

REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES

EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN

DEVELOPED OR ARE NOT AVAILABLE

PROVIDE A STATEMENT OF ACTIONS, IF ANY, THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE

ACQUISITIONS ARE REQUIRED

SIGNATURE AND TITLE OF CUSTOMER

TELEPHONE NUMBER

DATE

SIGNATURE OF CONTRACTING OFFICER TELEPHONE NUMBER DATE

Sheet1

SOLICITATIONS MAY BE LIMITED TO ONE SOURCE ONLY IF THE CONTRACTING OFFICER DETERMINES THAT ONLY ONE SOURCE IS REASONABLY AVAILABILE THIS DETERMINATION MUST BE SUPPORTED WITH FULL JUSTIFICATION FOR SOLE SOURCE FROM CUSTOMER WHEN THE CUSTOMER DESCRIBES AN ITEM WITH A PURCHASE DESCRIPTION WHICH LIMITS THE AVAILABILITY TO ONE SOURCE THE JUSTIFICATION MUST EXPLAIN WHY THE ITEM IS THE ONLY ONE THAT WILL MEET THE GOVERNMENTS REQUIREMENT STATEMENTS SUCH AS ONLY KNOWN SOURCE OR ONLY SOURCE WHICH CAN MEET THE REQUIRED DELIVERY DATE ARE INADEQUATE TO SUPPORT A SOLE SOURCE PURCHASE THE CUSTOMER SHALL PROVIDE THE FOLLOWING INFORMATION:
PURCHASE REQUEST OR REQUISTION NUMBER:
PROJECTTASK NUMBER:
ESTIMATED AMOUNT OVER 3000 BUT NOT EXCEEDING 150000:
BRIEF DESCRIPTION OF SUPPLIES OR SERVICES REQUIRED AND THE INTENDED USE: Purchase of three (8) Cooler, Fluid, NSN: 4420-01-505-9267, P/N: 5 115 04 030 006

From OEM: Fluid Handling LLC DBA Xylem Standard Xchange, CAGE 6LE50 Used on WLM-175 Z-Drive propulsion system

UNIQUE CHARACTERISTICS THAT LIMIT AVAILABILITY TO ONLY ONE SOURCE WITH THE REASON NO OTHER SUPPLIES OR SERVICES CAN BE USED: These items are lubrication oil coolers for the Z-Drive propulsion system installed on WLM-175 class cutters. They are critical components, the failure of which could cause damage to the ship's propulsion system. The OEM parts are known to be fully compatible with the existing propulsion system. The USCG does not possess the proprietary drawings, design, and technical data that would be needed to determine the compatibility of alternate parts.
REASON THAT SUGGESTED SOURCE IS THE ONLY SOURCE WHICH CAN PROVIDE THE SUPPLIES OR SERVICES: The Coast Guard did not purchase the manufacturer's proprietary data rights, and therefore, cannot determine with certainty that an alternative part number would mount to, interface with, or operate effectively with Coast Guard Cutters. Failure of an alternative part, not conforming to the OEM's specifications, could cause damage to the cutters. The manufacturing drawing and specifications have not been purchased by the Coast Guard.
EXPLAIN WHY AN ADEQUATE PURCHASE DESCRIPTION OR OTHER INFORMATION SUITABLE TO SOLICIT BY FULL AND OPEN COMPETITION HAS NOT BEEN DEVELOPED OR ARE NOT AVAILABLE: When the Coast Guard purchased the original equipment there were no requirements for manufacturer's drawings, detailed parts lists, design or testing procedures. OEM is the only known manufacturer that has the techniques, design specifications, testing, quality assurance capability, and documentation necessary to manufacture these parts as used on board Coast Guard WLM-175 class Cutters
PROVIDE A STATEMENT OF ACTIONS IF ANY THE GOVERNMENT MAY TAKE TO REMOVE OR OVERCOME ANY BARRIERS TO COMPETITION BEFORE FUTURE ACQUISITIONS ARE REQUIRED: COR will continue to conduct market research with a focus on locating vendors that are able to meet requirement.
SIGNATURE AND TITLE OF CUSTOMER:
CODE:
TELEPHONE NUMBER:
DATE:
SIGNATURE OF CONTRACTING OFFICER:
CODE_2:
TELEPHONE NUMBER_2:
DATE_2:
ONE LEVEL ABOUT CONTRACTING OFFICER:
CODE_3:
TELEPHONE NUMBER_3:
DATE_3:

File details come from the government source that posted it. Updated .