Ignition Element Loaded Assembly_SOW-AETC_RevA.docx
DOCX document 15 KB Posted
- Attached to
- Ignition Element Loaded Assembly
- Solicitation number
- N00174-25-SIMACQ-JPO-0019
About this file
This Statement of Work outlines requirements for manufacturing 150 ignition element loaded assemblies (part #30003-3205AS318) for the Naval Surface Warfare Center Indian Head. The contractor must deliver the assemblies within 6 weeks of contract award, provide a Certificate of Conformance confirming compliance with drawing requirements, and furnish Ammunition Data Cards through the WARP system per MIL-STD-1168 standards.
The associated Special Notice indicates NSWC IHEODTD's intent to sole source this requirement to AETC in Burton, TX as a firm-fixed-price contract under NAICS 325920. Interested parties must demonstrate capability by December 25, 2024 at 10AM EST by contacting James Ludwick. The total period of performance is 8 weeks after award, with delivery to NSWC IHD in Indian Head, MD. Technical oversight will be provided by Benjamin Kerlin of the CAD/PAD Joint Program Office.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work for CAD/PAD JM92 Ignition Element Loaded Assembly, 3205AS318
1.0 Introduction
1.1 Scope. This Statement of Work (SOW) defines the contractor’s efforts required to manufacture ignition element loaded assemblies, 30003-3205AS318, that meet the dimensional, material, and specified characteristics and performance requirements outlined in the government DWG 30003-3205AS318.
2.0 Applicable Documents
30003-3205AS318
3.0 Requirements
3.1 Contractor shall manufacture and ship a lot of 150 each of the ignition element loaded assemblies in accordance with 30003-3205AS318 to NSWC Indian Head for Government Evaluation no later than 6 weeks after contract award (CDRL A001). The Contractor shall also provide a Certificate of Conformance for each lot of ignition element loaded assemblies (CDRL A001) that explicitly states all the Drawing requirements have been met.
The contractor shall also provide an Ammunition Data Card (ADC) for the full assembly (CDRL A002). Under the direction of MIL-STD-1168, the Contractor shall furnish Ammunition Data Cards (ADC) for each shipment (test and production) as generated using the Worldwide Ammunition- data Repository Program (WARP). Preparation instructions are found in DI-MISC-80043B and on the WARP website in the WARP User's Manual. All components and subassemblies shall be listed on the ADC per DI-MISC-80043B, paragraph 3.
NOTE: The WARP system for Ammo Data Cards requires Contractors to hold a certificate to access the system and communicate with the secure DoD server.
The site to obtain ECA Access Certificate is: http://www.identrust.com/warp/index.html The WARP login website is: https://mhpwarp.redstone.army.mil
Lot numbers for all explosive components and explosive subassemblies shall be in accordance with MIL-STD-1168 (Ammunition Lot Numbering and Ammunition Data Card), and shall be included in the components section of the Ammunition Data Card.
4.0 Deliverables
4.1 Data. The Contractor shall provide the certificate of conformance for the ignition element loaded assembly lot to the DWG, 30003-3205AS318. The Contractor shall also provide the ADC for the ignition element loaded assembly lot.
4.2 Material. The Contractor shall deliver the loaded element ignition assembly lot, 150 each of 3000-3205AS318.
5.0 Period of Performance is 8 weeks after contract award.
6.0 Points of Contact
Technical POC:
Benjamin Kerlin CAD/PAD Joint Program Office, Advanced Development Lead Benjamin.m.kerlin.civ@us.navy.mil 301-744-4590
Shipping Address:
NSWC IHD
RECEIVING OFFICER
Attn: Ben Kerlin
5021 SAFE HAVEN WAY
INDIAN HEAD, MD 20640-5173
File details come from the government source that posted it. Updated .