AMENDMENT_A0001__HSCG85-16-Q-P45H85.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE PAGE OF PAGES

1 2

2. AMENDMENT/MODIFICATION NO.

A0001

3. EFFECTIVE DATE

29JUN2016

4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (If applicable)

6. ISSUED BY CODE 52000 7. ADMINISTERED BY (If other than Item 6) CODE 52000

USCG SURFACE FORCES LOGISTICS CENTER

300 E. MAIN ST. SUITE 600

NORFOLK, VA 23510

USCG SURFACE FORCES LOGISTICS

CENTER 300 E. MAIN ST. SUITE 600

NORFOLK, VA 23510

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION

NO.

HSCG85-16-Q-P45H85

9B. DATED (SEE ITEM 11)

21 June 2016

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE

PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment your desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO.

IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

FY2016 SLEDGE DRYDOCK REPAIR

1. The following solicitation HSCG85-15-Q-P45H85 is hereby amended to answer questions submitted by contractors. See following pages.

2. USCGC SLEDGE work specification Rev-0, 04 MAY 2016 is incorporated.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

KATHRYN STARK

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

29JUN2016

NSN 7540-01-152-8070

Previous edition unusable

STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

HSCG85-16-Q-P45H85

USCG SLEDGE (WLIC-75303) DRYDOCK REPAIRS

DRYDOCK REPAIRS FOR USCGC SLEDGE (WLIC 75303)

QUESTION: #1 D-007 Cathodic Protection / Zinc Anodes, Renew - Tender

The table in paragraph 1.1 identifies the sea chest zincs as ZHB/23, 3” x 12” x 1.25”. Please verify the designation as ZHB and the description of 23#. Normally 3” x 12” x 1.25” zincs are

13# zincs.

RESPONSE: Confirmed per specification

QUESTION: #2 D-007 Cathodic Protection / Zinc Anodes, Renew - Tender

The table in paragraph 1.1 identifies the majority of the zincs to be installed as ZHB/23, 6” x 12” x 1.25”. Please verify the zinc type designation (ZHB). ZHS zincs are normally installed and the ZHB designation (bronze straps vs steel) increases the price of the zinc by 400%.

RESPONSE: ZHB equals Bolt On, ZHS equals Strap

RFQ Number: HSCG85-16-Q-P45H85

SOLICITATION SECTION: PARA NO.

DEFINITE/OPTIONAL ITEM NO. PARA NO.

TITLE:

3. All other terms and conditions remain unchanged.