SOW_Fence.pdf

SCOPE OF WORK

INSTALL PRIVACY FENCE AT UPH

UNITED STATES COAST GUARD

TRAINING CENTER CAPE MAY

MAY 16, 2016

This Scope of Work shall include the procurement and installation of a privacy fence at

USCG Training Center. The work included is to order approximately 100 linear feet of six foot privacy fence and 60 linear feet of four foot picket fence.

Work shall include but not be limited to the following:

Procure vinyl fence in color selected by owner from manufacturer standard color selections.

Fence should be similar to specified sizes and styles outlined in specifications section.

Provide shop drawings for post installations.

Install new fence and posts at the site specified, working around any interferences shown on map.

Any additional labor, supervision, mobilization, demobilization, restoration and clean up.

The work above shall include all labor, materials, equipment, supervision and all other incidentals necessary to complete the work.

FENCE SPECIFICATIONS

PART 1 GENERAL

1.1 SUMMARY

A. Section Includes:

1. Fence sections including pickets, rails, posts, and caps

2. Concrete encased posts.

3. Miscellaneous hardware.

4. Excavation and anchorage for posts

1.2 SUBMITTALS

A. Manufacturer's technical literature with fence and gate installation instructions

B. Shop drawings showing fence design

C. Material samples if requested:

PART 2 PRODUCTS

2.1 MATERIALS AND COMPONENTS

A. Materials and Components: Typical sizes

Cross Section

Wall Thickness

Posts 4" x 4" 0.140 "

Rails 2 " x 6 " Hollow 0.125 "

Pickets 7/8 " x 3 " 0.060 "

2.2 MATERIALS

A. The fence is constructed with materials made of rigid Poly Vinyl Chloride (PVC) formulated to resist impact and for Ultra Violet (UV) stabilization

2.3 COMPONENTS

A. Rails, Pickets, Posts

1. Are cut to specific lengths as required for style specified

2. Rails are routed to receive pickets

3. Posts are routed to receive rails at correct heights

B. Stiffener Channel

1. Bottom rails for residential and commercial applications contain steel reinforcing for additional strength. Refer to style channel available upon request.

C. Post Caps

1. Caps are PVC molded

2. External fit flat for 4" x 4"

PART 3 EXECUTION

3.1 POST INSTALLATION

A. Install posts plumb and in alignment. Set post in 3000 psi concrete. Cure concrete and grout a minimum of 72 hours before any further work is done on the posts.

B. Install posts, panels and accessories in accordance with ASTM F567.

END OF SECTION

6’ Privacy Fence with Lattice Top (or similar)

4’ Picket Style Fence (or similar)