Attachment_B_-_Specification_for_Purchase_of_Honda_Outboard_Engine_Parts.pdf

REVISION No. . CHANGE NO. .

SPECIFICATION FOR PURCHASE OF

HONDA OUTBOARD ENGINE PARTS

P-XXX-XXXX

ORGINATED BY Thomas J. Kraemer DATE 8-31-16

COMMAND / DIVISION SMALL BOAT PRODUCT LINE (SBPL)

DEPARTMENT / DIVISION CENTRAL ENGINE OVERHAUL

INTERNAL REVIEWER ___________________ DATE _____

SOWRB APPROVAL __ DATE _______

USCG – SBPL

HONDA OUTBOARD ENGINE PARTS PURCHASE SPECIFICATION

1.0. SCOPE

This specification defines the requirements for the purchase and provisioning of various engine parts, components and equipment used on Honda Outboard Engines from American Honda Motor

Co., Inc. The following is a list of parts manuals listing all of the parts required under this contract for purchasing through executed delivery orders using the Honda Network website. The amount and required delivery date shall be established through the Contract.

Engine Model Manual Number

A. BF50 BF50D-BF50DK2 USCG Edition January 2011

B. BFP60 BFP60A-BFP60AK1 USCG Edition January 2009

C. BF150 BF150A6-BF150AK0 USCG Edition April 2011

D. Bf225 BF225A6-BF225AK0 USCG Edition April 2011

2.0. APPLICABLE DOCUMENTS

2.1. General - The documents listed in this section are referenced in section 3 and 4 of this specification. This section does not include documents sited in other sections of this specification, which are recommended for additional information or used as examples.

While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements cited in section 3 and 4 of this specification, whether or not the referenced documents are listed here.

2.2. Industry Publications - The following documents of the issues specified form a part of this specification to the extent referenced herein. Suffixes denoting the specific issue of each document will be omitted from the future references to the document in this specification.

Organization Specification No. Title

A. American Society for D3951 Standard Practice for

Testing and Materials Commercial Packaging

(ASTM)

B. Military Standards MIL-STD-129P Standard Practice for

Military Markings

C. USCG Engineering D-000-100 USCG Bar Coding

Logistics Center

Specification for

Bar Coding

USCG – SBPL

2.3. Specification and Order of Precedence - In the event of a conflict between the text of this specification and the references cited herein, the text of this specification takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

3.0. REQUIREMENTS

3.1. Design

3.1.1 Design, Dimensions and Dimensional Tolerances – All items shall conform to OEM design, dimensions and tolerances.

3.3. MARKING

3.3.1. Identification Marking- For tracking purposes, each item shall be identified by identification marking. The marking shall be stamped, engraved, or otherwise permanently affixed to each item and must contain at least the following: NSN, Part

Number, Unit of Issue, Condition Code (A) and Contract number.

4 PACKAGING

4.1 Each item is to individually packaged in accordance with ASTM D 391 “Standard

Practice for Commercial Packaging”. Each unit is to individually marked in accordance with MIL-STD-129. Bar coding is required and will be in accordance with

ANSI/AIM BC1.