TURBO_15-R-20137.doc

HSCG40-15-R-20137

HSCG40-15-R-20137

THIS PAGE IS LEFT OPEN FOR THE SF1449 TO BE INSERTED

NOTICE FOR FILING AGENCY PROTESTS

United States Coast Guard Ombudsman Program

It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time-consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the Government Accountability Office (GAO).

Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the Contracting Officer or Ombudsman.

Informal Forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the applicable Contracting Officer. If the Contracting Officer is unable to satisfy their concerns, interested parties are encouraged to contact the U.S. Coast Guard Ombudsman for Agency Protests. Under this informal process the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable).

Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester’s concerns are unresolved, an Independent Review is available by the Ombudsman. The protester may file a formal agency protest to either the Contracting Officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency’s goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth in FAR 33.103(d) (2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. To be timely protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted to:

COMMANDANT (CG-9131)

U S COAST GUARD

OMBUDSMAN PROGRAM FOR AGENCY PROTESTS

2100 2ND ST SW STOP 7112

WASHINGTON DC 20593-7112

The Ombudsman Hotline telephone number is 202.372.3695.

Table of Contents

DESCRIPTION:

PAGE

Notice for Filing Agency Protests

Standard Form 1449 (SF1449)

Table of Contents

Addendum to Standard Form 1449:

Blocks 19 – 26, Schedule of Supplies/Services

4-60

Block 15, Deliveries, Packaging and Marking

61-63

Contract Administration Data/Invoicing Requirements

64-66 Special Contract Requirements

Addendum to FAR Clause 52.212-4, Contract Terms and Conditions –

Commercial Items

68-75 FAR Clause 52.212-5, Contract Terms and Conditions Required to Implement

Statutes or Executive Orders – Commercial Items

76-83 Addendum to FAR Provision 52.212-1, Instructions to Offerors –

84-87 Commercial Items

FAR Clause 52.212-2 – Evaluation- Commercial Items 88 Addendum to FAR Clause 52.212-2 – Evaluation- Commercial Items 89-90 FAR Provision 52.212-3 – Offeror Representations and Certifications –

91-108 Commercial Items

ATTACHMENTS:

Attachment 1: Specification R-251-0120 for Overhaul Specification for Alco Turbochargers used on 210’ and 270’ WMEC Coast Guard Vessels, dated 6/1992 Attachment 2: DHS Form 700-5 Contractor Report of Government Property Attachment 3: Government Furnished Property Discrepancy Report

ADDENDUM TO STANDARD FORM 1449

THE SCHEDULE

DESCRIPTION/SPECIFICATION/WORK STATEMENT

CLINS (Contract Line Item Number) 0001 through 4007 are for the Overhaul of Turbochargers, Type 1 (Model 131, P/N 22602171-2), Type 2 (Model 165, P/N 22602128-2) and Type 3 (Model 720, P/N 22600172-4), to be performed in strict accordance with USCG SFLC Specification R-251-120, Overhaul Specification for Alco Turbochargers used on 210’ and 270’ WMEC Coast Guard Vessels.

NOTICE TO OFFERORS

***All questions regarding this solicitation MUST be submitted in writing. You may email them to Florence Harwood at Florence.m.harwood@uscg.mil. No inquiries will be answered verbally!!

Contractor’s shall not modify, change or update any part number or incorporate any notes into the solicitation. If a Contractor believes that any portion of this solicitation is incorrect, or an ambiguity exists, the Contractor shall notify the Contracting Office, in writing, prior to the date and time specified for receipt of proposals. Failure to follow this direction may render your proposal unacceptable and rejected.

IN ORDER TO BE TECHNICALLY ACCEPTABLE AND TO BE CONSIDERED FOR AN AWARD, OFFERORS ARE REQUIRED TO BE THE ORIGINAL EQUIPMENT MANUFACTURER (OEM) OR AN AUTHORIZED REPAIR FACILITY.

**SEE ADDENDUM TO 52.212-2, EVALUATION CRITERIA (PAGE 88), FOR MORE INFORMATION REGARDING THIS REQUIREMENT.

TYPE OF CONTRACT

This is a Requirements-Type Contract with one (1) Base Year and four (4) Option Years. A Requirements Type Contract is defined in FAR Clause 52.216-21 (Oct 1995). The period of performance will begin on the date of contract award and end one year afterward; each subsequent option year, if exercised, will begin one day after the end of the previous contract year and end one year thereafter.

ESTIMATED REQUIREMENTS/ QUANTITIES

The quantities shown in the attached Addendum to Blocks 19-24 of the Standard Form 1449 are estimates of the Coast Guard’s annual requirements for the base year and each corresponding option year. These estimated requirements are for information purposes only and shall not be considered as orders. However, the U.S. Coast Guard SFLC is obligated to order such quantities as may be needed to fill Coast Guard requirements for the overhaul(s) specified during the term of the contract. Except as otherwise provided for herein, the Contractor is obligated to deliver all such quantities as may be required to fulfill the requirements of each individual task order.

ORDERING/TASK ORDERS

a. Supplies and services will be ordered by the issuance of individual task orders. Refer to FAR Clause 52.216-18 Ordering, page 73.

b. Any supplies or services to be furnished under this contract shall be ordered by issuance of task orders by the following activity:

U.S. Coast Guard – Surface Forces Logistics Center WMEC Product Line (C&P1) 707 E. Ordnance Road Baltimore, MD 21226

c. All task orders issued hereunder are subject to the terms and conditions of this contract which shall control in the event of conflict with any task order.

d. The Contractor shall fill Task Orders in the same sequence in which they are received, unless otherwise instructed by the Contracting Officer.

OPTIONS

Each Option extending the term of this Contract shall be for a period of one (1) year from the effective date of each Option and shall be issued in accordance with FAR 52.217-9 (Mar 2000).

GOVERNMENT FURNISHED PROPERTY (GFP)

The Government shall provide only that property set forth below, notwithstanding any terms or conditions of the specification to the contrary. All property provided to the Contractor by the Government under this contract shall be subject to the Government Property clause of this contract. Actual quantities furnished will be determined on individual task orders.

NOTE: The Contractor’s property control system may be reviewed for approval, in accordance with Government Property requirements. Each turbocharger, upon transfer from the Government to the Contractor, shall be examined for completeness, proper type, quantity, and damage. The Contractor shall be fully and solely responsible for any damage to such material while in the contractor’s custody and until it is returned to the US Coast Guard Surface Forces Logistics Center (SFLC) and accepted by the Contracting Officer or authorized representative. Discrepancies shall be reported to the Contracting Officer on the provided Government Furnished Property Discrepancy Report (Attachment 3 to this solicitation).

GFP/ITEM VALUE/EA.

Contract Line Item Number (CLIN) 0001 – 4001, Turbocharger $61,706.47

NSN 2950-01-233-3468, Model #131 Contract Line Item Number (CLIN) 0002 – 4002, Turbocharger $67,906.15

NSN 2950-01-118-7979, Model # 165 Contract Line Item Number (CLIN) 0003 – 4003, Turbocharger $59,573.64 NSN 2950-01-363-1644, Model #720

ADDRESS FOR SHIPMENT OF GOVERNMENT FURNISHED PROPERTY

Firm Name: _________________________________________

Street Address: ______________________________________

City, State, Zip Code: _________________________________

ADDENDUM TO STANDARD FORM 1449

SUPPLIES OR SERVICES AND PRICE/COST

BASE YEAR REQUIREMENTS

CLIN 0001

NSN 2950-01-233-3468

Turbocharger, Model 131, P/N 22602171-2

EST UNIT TOTAL

DESCRIPTION

QTY PRICE PRICE

0001a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________ with Paragraph 3.3 of Specification R-251-0120

0001b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3.4, 3.5 & 3.6 of Specification R-251-0120

(This cost shall include all mandatory parts for Model 131.)

0001c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________ for disposal of this CLIN if asset is determined BER.

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

0001d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

Paragraph 3.7 of Specification R-251-0120.

0001e Quality Program in accordance with paragraph 4.3

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

0001f Government Property Reports

$___NSP_____ $____NSP____

Mandatory Replacement Parts, Model 131, QTY

a. Gasket, P/N 2151091501 (21510915-1)

b. O-Ring, P/N 21526718-1

c. Gasket, P/N 21536512

d. Gasket, P/N 2154432-2

e. Gasket, P/N 2154433-2

f. Gasket, P/N 2154434-1

g. Gasket, P/N 2154435-1

h. Bearing Assembly, P/N 2260164-1

i. Bearing Assembly, P/N 2260165-1

j. Shim, P/N 22610217

k. Shim, P/N 22610218

l. Shim, P/N 22610221-1

m. Oil Seal, P/N 22612117

n. Oil Seal, P/N 22612118-2

o. Installation Kit P/N 25000388-1

p. Lifting Eyebolt P/N GT1000064

Contingency Replacement Parts, Model 131, Contractor shall provide prices for individual contingency replacement parts:

QTY PRICE PRICE

a. Pipe Plug, P/N 16393723

1 $___________ $____________

b. Capscrew, Special, P/N 21512863 16 $___________ $____________

c. Capscrew, P/N 21512865

18 $___________ $____________

d. Lockwasher, P/N 2151311-1

2 $___________ $____________

e. Lockwasher, P/N 2151312-1

42 $___________ $____________

f. Lockwasher, P/N 2151313-1

43 $___________ $____________

g. Capscrew, P/N 21513510-1

12 $___________ $____________

h. Capscrew, P/N 21513513-1 4 $___________ $____________

i. Capscrew, P/N 2151352-1

2 $___________ $____________

j. Washer, P/N 2151495-1 4 $___________ $____________

k. Nut, P/N 2151697-1

21 $___________ $____________

l. Dowel, P/N 21517744-1

6 $___________ $____________

m. Flathead Screw, P/N 21529627 2 $___________ $____________

n. Plug, P/N 2153284

1 $___________ $____________

o. Plug, P/N 2153286

p. Dowel, P/N 2154765

q. Capscrew, P/N 21555893

42 $___________ $____________

r. Air Discharge Casing, P/N 22600431-1 1 $___________ $____________

s. Air Inlet Assembly, P/N 22600452-1

1 $___________ $____________

t. Gas Inlet Assembly, P/N 22600454

1 $___________ $____________

u. Rotor Assembly, P/N 22600456-1

v. Impeller P/N 2670014-1

w. Shaft assembly P/N 2260114-1

1 $___________ $____________

x. Washer Comp. P/N 22611314-1

1 $___________ $____________

y. Turbine Disc Assmy P/N 22600714-2 1 $___________ $____________

z. Turbine Blades P/N 22618137

58 $___________ $____________

aa. Blade locks P/N 22618137

ab. Air Inlet Casing, P/N 22610525-1

ac. Capscrew, P/N 22611513

6 $___________ $____________

ad. Gas Inlet Casing, P/N 2261260 (22612620) 1 $___________ $____________

ae. Basic Assembly, P/N 22612622-1

1 $___________ $____________

af. Turbine Casing, P/N 22612715-1

ag. Cover, P/N 22613016-1

ah. Cover, P/N 22613017-1

ai. Cover, P/N 22611309-1

aj. Nozzle Clamp, P/N 2261462-1

ak. Connector, P/N 2261553

al. Shroud Ring, P/N 2261611-1

am. Nozzle Ring, P/N 22616526-1

an. Diffuser Ring, P/N 22616715

ao. Cover, P/N 2402085

ap. Cover, P/N 2402086

aq. Cover, P/N 2402087

ar. Capscrew, P/N 21549661

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 0001 $___________________

CLIN 0002

NSN 2950-01-118-7979

Turbocharger, Model 165, P/N 22602128-2

0002a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________ with Paragraph 3.3 of Specification R-251-0120.

0002b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3.4, 3.5 & 3.6 of Specification R-251-0120.

(This cost shall include all mandatory parts for Model 165.)

0002c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

0002d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

0002e Quality Program in accordance with Paragraph 4.3

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

0002f Government Property Reports

Mandatory Replacement Parts, Model 165, NSN 2950-01-118-7979

a. O-Ring, P/N 21526719-1

b. Gasket Connector, P/N 2153654-1

c. Gasket, Cover Plate, P/N 2154432-2

d. O-Ring, P/N 215267260 (21526726)

e. Shim, Turbo to Support, P/N 226120213

f. Shim, Air Seal, P/N 22610223-1

g. Shim, Bearing Carrier, P/N 22610224

h. Shim, Oil Seal, P/N 22610225-1

i. Thrust Washer, Small, P/N 22611310-1

j. Thrust Washer, P/N 2261139-1

k. Bearing, P/N 2612012-1 (22612012-1)

l. Oil Seal, P/N 22612120-1

m. Oil Seal, P/N 22612121-1

n. Air Seal, P/N 2261631-1

o. Bearing Assembly TE P/N 2260162-1

p. Bearing assembly BE P/N 2260161-1

q. Installation kit P/N 25000378-1

r. Lifting Eyebolt P/N GT100064

Contingency Replacement Parts, Model 165, UNIT

TOTAL

a. Elbow, P/N 24023642

b. Pipe Plug, P/N 16393718

c. Pipe Plug, P/N 1639374

d. Tube, P/N 16394015-1

e. Dowel, P/N 21511010-1

f. Capscrew, P/N 21512863

8 $___________ $____________

g. Lockwasher, P/N 2151312-1

24 $___________ $____________

h. Lockwasher, P/N 2151313-1

41 $___________ $____________

i. Lockwasher, P/N 21513513-1

j. Capscrew, P/N 21513513-1

20 $___________ $____________

k. Stud, P/N 21513513-1

l. Washer, P/N 2151495-1

m. Nut, P/N 2151697-1

n. Guide Pin, P/N 21517741

3 $___________ $____________

o. Dowel, P/N 21517744-1

p. Capscrew, P/N 2152866

10 $___________ $____________

q. Machine Screw, P/N 21529624

r. Straight Dowel, P/N 2154765

s. Capscrew, P/N 2154961

t. Capscrew, P/N 2154962

u. Capscrew, P/N 21549629

13 $___________ $____________

v. Capscrew, P/N 21549632

w. Capscrew, P/N 21549549

x. Capscrew, P/N 21549715

y. Capscrew, P/N 21553616

z. Capscrew, P/N 21555893

aa. Blower Casing, P/N 22600723

1 $___________ $____________

ab. Gas Inlet Casing, P/N 22600437

ac. Rotor, P/N 22600540-2

ad. Rotor, P/N 22600540-2

ae. Impeller P/N 22610815

af. Shaft Assy P/N 2260111

ag. Washer P/N 22611313

ah. Inducer P/N 22610913-2

ai. Turbine Disc Assembly P/N 22616553

aj. Turbine blade P/N 22618017

ak. Blade lock P/N 2261595-1

al. Nozzle Clamp Ring, P/N 22610459-1

am. Diffuser, P/N 22610460

an. Air Nozzle, P/N 22610464-1

ao. Nozzle Ring

ap. Air Inlet Casing, P/N 22610534

1 $___________ $____________

aq. Retainer Washer, P/N 22611311-1

ar. Dowel Pin, P/N 2261221-2

as. Dowel Pin, P/N 2261222-1

at. Bearing Retainer, P/N 22612312

1 $___________ $____________

au. Bearing Retainer, P/N 2261237

av. Retainer Ring, P/N 2261238

aw. Retainer Ring, P/N 2261239

ax. Main Casing, P/N 22612710-1

ay. Cover Plate, P/N 22613011-2

az. Cover Plate, P/N 22613012-1

ba. Shroud Ring, P/N 2261614

bb. Diffuser, P/N 2261674

bc. Tube Clamp, P/N 2401298-1

bd. Tube Clamp, P/N 441079

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 0002 $___________________

CLIN 0003

NSN 2950-01-363-1644

Turbocharger, Model 720, P/N 22600172-4

0003a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

0003b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3.4, 3.5 & 3.6 of Specification R-251-0120 .

(This cost shall include all mandatory parts for Model 720.)

0003c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

0003d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

0003e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

0003f Government Property Reports

Mandatory Replacement Parts, Model 720, NSN 2950-01-363-1644

a. Gasket, Connector, P/N 21536511-1

b. Gasket, P/N 21548714-1

c. Shim, Diffuser, P/N 22610210-1

d. O-Ring, P/N 2261121

e. Gasket, P/N 2261175-1

f. Bearing, P/N 2261208

g. Bearing, P/N 2261209

h. Seal, Oil, P/N 2261211-1

i. Seal, Oil, P/N 2261212-1

j. Stud P/N 2153004

k. Installation kit P/N 25000374-1

l. Lifting Eyebolt P/N GT1000064

Contingency Replacement Parts, Model 720, UNIT TOTAL

a. Connector, P/N 240122823

c. Pipe Plug, P/N 1639375

d. Pipe Plug, 1639379

e. Tube, P/N 16394015-1

f. Reducer, P/N 1639462

g. Lockwasher, P/N 2151311-1

12 $___________ $____________

h. Lockwasher, P/N 2151312-1

3 $___________ $____________

i. Lockwasher, P/N 21513120

16 $___________ $____________

j. Lockwasher, P/N 2151313-1

24 $___________ $____________

k. Capscrew, P/N 21513510-1

12 $___________ $____________

l. Capscrew, P/N 21513526-1

m. Stud, P/N 21514265

12 $___________ $____________

n. Nut, P/N 2151692-1

o. Nut, P/N 2151697-1

p. Capscrew, P/N 21523520-1

q. Capscrew, P/N 21523523

16 $___________ $____________

r. Screw, P/N 21526088

s. Screw, P/N 21529623

t. Screw, P/N 21529624

5 $___________ $____________

u. Washer, Heat Shield, P/N 21553815

v. Bolt, P/N 2155891

w. Intermediate Casing, P/N 2260031-1

x. Rotor, P/N 22600547

y. Impeller P/N 2670073-1

z. Shaft P/N 2261329

aa. Thrust Collar P/N 2261295

1 $___________ $____________

ab. Turbine Disc Assy P/N 22600716-1 1 $___________ $____________

ac. Turbine Blade P/N 22616873-1

50 $___________ $____________

ad. Blade lock P/N 2261592-1

50 $___________ $____________

ae. Gas Inlet Casing/Ring, P/N 22601020-5

af. Diffuser, P/N 22610415

ag. Nozzle Ring, P/N 22610433-3

1 $___________ $____________

ah. Blower Inlet Casing, P/N 22610511 1 $___________ $____________

ai. Blower Casing, P/N 2261052-2

1 $___________ $____________

aj. Turbine Casing, P/N 2261053

ak. Oil Pipe, P/N 2261111-1

al. Lube Oil Line, P/N 2261114

am. Washer, P/N 2261131

an. Nut, Special P/N 2261143-1

ao. Capscrew, P/N 2261158

ap. Eyebolt, P/N 2261161

aq. Pin, Special, P/N 2261221-1

2 $___________ $____________

ar. Retaining Ring, P/N 226123-1 (2261231-1) 1 $___________ $____________

as. Reinforcing Ring, P/N 2261541

at. Connector, P/N 2261551

au. Heat Shield, P/N 2261602-1

av. Clamp, P/N 24018356

aw. Clamp, P/N 24018357

ax. Pipe Plug, 515576A

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 0003 $___________________

OPTION YEAR 1 REQUIREMENTS

CLIN 1001

1001a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

1001b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

1001c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

1001d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

1001e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

1001f Government Property Reports

a. Pipe Plug, P/N 16393723

1 $___________ $____________

b. Capscrew, Special, P/N 21512863 16 $___________ $____________

c. Capscrew, P/N 21512865

18 $___________ $____________

d. Lockwasher, P/N 2151311-1

2 $___________ $____________

e. Lockwasher, P/N 2151312-1

42 $___________ $____________

f. Lockwasher, P/N 2151313-1

43 $___________ $____________

g. Capscrew, P/N 21513510-1

12 $___________ $____________

h. Capscrew, P/N 21513513-1 4 $___________ $____________

i. Capscrew, P/N 2151352-1

2 $___________ $____________

j. Washer, P/N 2151495-1

6 $___________ $____________

m. Flathead Screw, P/N 21529627

1 $___________ $____________

s. Air Inlet Assembly, P/N 22600452-1

1 $___________ $____________

t. Gas Inlet Assembly, P/N 22600454

1 $___________ $____________

u. Rotor Assembly, P/N 22600456-1

1 $___________ $____________

x. Washer Comp. P/N 22611314-1

1 $___________ $____________

y. Turbine Disc Assmy P/N 22600714-2 1 $___________ $____________

z. Turbine Blades P/N 22618137

1 $___________ $____________

ae. Basic Assembly, P/N 22612622-1

1 $___________ $____________

af. Turbine Casing, P/N 22612715-1

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 1001 $___________________

CLIN 1002

NSN 2950-01-118-7979

1002a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________ with paragraph 3.3 of Specification R-251-0120.

1002b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

1002c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

1002d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

1002e

1 $___NSP_____ $____NSP____

of Specification R-251-0120 1002f Government Property Reports

p. Bearing assembly BE P/N 2260161-1

1 $___________ $____________

ab. Gas Inlet Casing, P/N 22600437

1 $___________ $____________

aq. Retainer Washer, P/N 22611311-1

1 $___________ $____________

au. Bearing Retainer, P/N 2261237

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 1002 $___________________

CLIN 1003

NSN 2950-01-363-1644

1003a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________ with paragraph 3.3 of Specification R-251-0120.

1003b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3.4, 3.5 & 3.6 of Specification R-251-0120

1003c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

1003d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

1003e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

1003f Government Property Reports

a. Connector, P/N 240122823

12 $___________ $____________

h. Lockwasher, P/N 2151312-1

3 $___________ $____________

i. Lockwasher, P/N 21513120

16 $___________ $____________

j. Lockwasher, P/N 2151313-1

24 $___________ $____________

k. Capscrew, P/N 21513510-1

12 $___________ $____________

l. Capscrew, P/N 21513526-1

1 $___________ $____________

ab. Turbine Disc Assy P/N 22600716-1 1 $___________ $____________

ac. Turbine Blade P/N 22616873-1

50 $___________ $____________

ad. Blade lock P/N 2261592-1

50 $___________ $____________

ae. Gas Inlet Casing/Ring, P/N 22601020-5

ah. Blower Inlet Casing, P/N 22610511 1 $___________ $____________

ai. Blower Casing, P/N 2261052-2

1 $___________ $____________

aj. Turbine Casing, P/N 2261053

2 $___________ $____________

ar. Retaining Ring, P/N 226123-1

(2261231-1) 1 $___________ $____________

as. Reinforcing Ring, P/N 2261541

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 1003 $___________________

OPTION YEAR 2 REQUIREMENTS

CLIN 2001

2001a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

2001b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

2001c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

2001d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

2001e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

2001f Government Property Reports

a. Pipe Plug, P/N 16393723

1 $___________ $____________

b. Capscrew, Special, P/N 21512863 16 $___________ $____________

c. Capscrew, P/N 21512865

18 $___________ $____________

d. Lockwasher, P/N 2151311-1

2 $___________ $____________

e. Lockwasher, P/N 2151312-1

42 $___________ $____________

f. Lockwasher, P/N 2151313-1

43 $___________ $____________

g. Capscrew, P/N 21513510-1

12 $___________ $____________

h. Capscrew, P/N 21513513-1 4 $___________ $____________

i. Capscrew, P/N 2151352-1

2 $___________ $____________

j. Washer, P/N 2151495-1

6 $___________ $____________

m. Flathead Screw, P/N 21529627

1 $___________ $____________

s. Air Inlet Assembly, P/N 22600452-1

1 $___________ $____________

t. Gas Inlet Assembly, P/N 22600454

1 $___________ $____________

u. Rotor Assembly, P/N 22600456-1

1 $___________ $____________

x. Washer Comp. P/N 22611314-1

1 $___________ $____________

y. Turbine Disc Assmy P/N 22600714-2 1 $___________ $____________

z. Turbine Blades P/N 22618137

1 $___________ $____________

ae. Basic Assembly, P/N 22612622-1

1 $___________ $____________

af. Turbine Casing, P/N 22612715-1

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 2001 $___________________

CLIN 2002

NSN 2950-01-118-7979

2002a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

2002b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

2002c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

2002d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

2002e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

2002f Government Property Reports

p. Bearing assembly BE P/N 2260161-1

NSN 2950-01-118-7979

Contractor shall provide prices for individual contingency replacement parts:

1 $___________ $____________

ab. Gas Inlet Casing, P/N 22600437

1 $___________ $____________

aq. Retainer Washer, P/N 22611311-1

1 $___________ $____________

au. Bearing Retainer, P/N 2261237

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 2002 $___________________

CLIN 2003

NSN 2950-01-363-1644

2003a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

2003b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

2003c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

2003d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

2003e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

2003f Government Property Reports

NSN 2950-01-363-1644

a. Connector, P/N 240122823

12 $___________ $____________

h. Lockwasher, P/N 2151312-1

3 $___________ $____________

i. Lockwasher, P/N 21513120

16 $___________ $____________

j. Lockwasher, P/N 2151313-1

24 $___________ $____________

k. Capscrew, P/N 21513510-1

12 $___________ $____________

l. Capscrew, P/N 21513526-1

1 $___________ $____________

ab. Turbine Disc Assy P/N 22600716-1 1 $___________ $____________

ac. Turbine Blade P/N 22616873-1

50 $___________ $____________

ad. Blade lock P/N 2261592-1

50 $___________ $____________

ae. Gas Inlet Casing/Ring, P/N 22601020-5

ah. Blower Inlet Casing, P/N 22610511 1 $___________ $____________

ai. Blower Casing, P/N 2261052-2

1 $___________ $____________

aj. Turbine Casing, P/N 2261053

2 $___________ $____________

ar. Retaining Ring, P/N 226123-1

(2261231-1) 1 $___________ $____________

as. Reinforcing Ring, P/N 2261541

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 2003 $___________________

OPTION YEAR 3 REQUIREMENTS

CLIN 3001

3001a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

3001b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3001c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

3001d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

3001e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

3001f Government Property Reports

a. Pipe Plug, P/N 16393723

1 $___________ $____________

b. Capscrew, Special, P/N 21512863 16 $___________ $____________

c. Capscrew, P/N 21512865

18 $___________ $____________

d. Lockwasher, P/N 2151311-1

2 $___________ $____________

e. Lockwasher, P/N 2151312-1

42 $___________ $____________

f. Lockwasher, P/N 2151313-1

43 $___________ $____________

g. Capscrew, P/N 21513510-1

12 $___________ $____________

h. Capscrew, P/N 21513513-1 4 $___________ $____________

i. Capscrew, P/N 2151352-1

2 $___________ $____________

j. Washer, P/N 2151495-1

6 $___________ $____________

m. Flathead Screw, P/N 21529627

1 $___________ $____________

s. Air Inlet Assembly, P/N 22600452-1

1 $___________ $____________

t. Gas Inlet Assembly, P/N 22600454

1 $___________ $____________

u. Rotor Assembly, P/N 22600456-1

1 $___________ $____________

x. Washer Comp. P/N 22611314-1

1 $___________ $____________

y. Turbine Disc Assmy P/N 22600714-2 1 $___________ $____________

z. Turbine Blades P/N 22618137

1 $___________ $____________

ae. Basic Assembly, P/N 22612622-1

1 $___________ $____________

af. Turbine Casing, P/N 22612715-1

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 3001 $___________________

CLIN 3002

NSN 2950-01-118-7979

3002a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

3002b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3002c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

3002d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

3002e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

3002f Government Property Reports

p. Bearing assembly BE P/N 2260161-1

NSN 2950-01-118-7979

Contractor shall provide prices for individual contingency replacement parts:

1 $___________ $____________

ab. Gas Inlet Casing, P/N 22600437

1 $___________ $____________

aq. Retainer Washer, P/N 22611311-1

1 $___________ $____________

au. Bearing Retainer, P/N 2261237

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 3002 $___________________

CLIN 3003

NSN 2950-01-363-1644

3003a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

3003b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

3003c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

3003d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

3003e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

3003f Government Property Reports

NSN 2950-01-363-1644

a. Connector, P/N 240122823

12 $___________ $____________

h. Lockwasher, P/N 2151312-1

3 $___________ $____________

i. Lockwasher, P/N 21513120

16 $___________ $____________

j. Lockwasher, P/N 2151313-1

24 $___________ $____________

k. Capscrew, P/N 21513510-1

12 $___________ $____________

l. Capscrew, P/N 21513526-1

1 $___________ $____________

ab. Turbine Disc Assy P/N 22600716-1 1 $___________ $____________

ac. Turbine Blade P/N 22616873-1

50 $___________ $____________

ad. Blade lock P/N 2261592-1

50 $___________ $____________

ae. Gas Inlet Casing/Ring, P/N 22601020-5

ah. Blower Inlet Casing, P/N 22610511 1 $___________ $____________

ai. Blower Casing, P/N 2261052-2

1 $___________ $____________

aj. Turbine Casing, P/N 2261053

2 $___________ $____________

ar. Retaining Ring, P/N 226123-1

(2261231-1) 1 $___________ $____________

as. Reinforcing Ring, P/N 2261541

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 3003 $___________________

OPTION YEAR 4 REQUIREMENTS

CLIN 4001

4001a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

4001b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

4001c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

4001d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

4001e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

4001f Government Property Reports

a. Pipe Plug, P/N 16393723

1 $___________ $____________

b. Capscrew, Special, P/N 21512863 16 $___________ $____________

c. Capscrew, P/N 21512865

18 $___________ $____________

d. Lockwasher, P/N 2151311-1

2 $___________ $____________

e. Lockwasher, P/N 2151312-1

42 $___________ $____________

f. Lockwasher, P/N 2151313-1

43 $___________ $____________

g. Capscrew, P/N 21513510-1

12 $___________ $____________

h. Capscrew, P/N 21513513-1 4 $___________ $____________

i. Capscrew, P/N 2151352-1

2 $___________ $____________

j. Washer, P/N 2151495-1

6 $___________ $____________

m. Flathead Screw, P/N 21529627

1 $___________ $____________

s. Air Inlet Assembly, P/N 22600452-1

1 $___________ $____________

t. Gas Inlet Assembly, P/N 22600454

1 $___________ $____________

u. Rotor Assembly, P/N 22600456-1

1 $___________ $____________

x. Washer Comp. P/N 22611314-1

1 $___________ $____________

y. Turbine Disc Assmy P/N 22600714-2 1 $___________ $____________

z. Turbine Blades P/N 22618137

1 $___________ $____________

ae. Basic Assembly, P/N 22612622-1

1 $___________ $____________

af. Turbine Casing, P/N 22612715-1

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 4001 $___________________

CLIN 4002

NSN 2950-01-118-7979

4002a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________

4002b Overhaul Turbocharger in accordance with Paragraph 4 $___________ $____________

4002c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

4002d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

4002e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

4002f Government Property Reports

p. Bearing assembly BE P/N 2260161-1

NSN 2950-01-118-7979

Contractor shall provide prices for individual contingency replacement parts:

1 $___________ $____________

ab. Gas Inlet Casing, P/N 22600437

1 $___________ $____________

aq. Retainer Washer, P/N 22611311-1

1 $___________ $____________

au. Bearing Retainer, P/N 2261237

TOTAL COST OF CONTINGENCY PARTS FOR CLIN 4002 $___________________

CLIN 4003

NSN 2950-01-363-1644

4003a Arrival Inspection/Disassembly Inspection in accordance 4 $___________ $____________ with Paragraph 3.3.

4003b Overhaul Turbocharger in accordance with paragraph 4 $___________ $____________

3.4, 3.5 & 3.6 (This cost shall include all mandatory parts for Model 720.)

4003c Beyond Economical Repair (BER) – Provide pricing 1 $___________ $____________

Cost shall be for open, inspect and report of BER only, and the reassembly and return to the Coast Guard or disposal at Contractor’s facility, as directed.

4003d Reassembly Report/Test Report in accordance with 1 $___NSP_____ $____NSP____

4003e

1 $___NSP_____ $____NSP____

of Specification R-251-0120.

4003f Government Property Reports

$___NSP_____ $____NSP____

NSN 2950-01-363-1644

a. Connector, P/N 240122823

12 $___________ $____________

h. Lockwasher, P/N 2151312-1

3 $___________ $____________

i. Lockwasher, P/N 21513120

16 $___________ $____________

j. Lockwasher, P/N 2151313-1

24 $___________ $____________

k. Capscrew, P/N 21513510-1

12 $___________ $____________

l. Capscrew, P/N 21513526-1

12 $