The_Telehandler_must_meet_the_following_minimum_requirements.doc
DOC document 24 KB Posted
- Attached to
- Telehandler
- Solicitation number
- HSCG-29-16-Q-L2350
About this file
This is a advised copy.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Revised.copy._Telehandler.minimum_requirements.doc | DOC document | |
| far.clauses.Mar.16.doc | DOC document | |
| The_Telehandler_must_meet_the_following_minimum_requirements.doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Advised copy dated 6/22/16.
The Telehandler must meet the following minimum requirements:
1. 10,000 pound lift capacity; 4000 pounds when fully extended; & 3000 pounds at maximum reach
2. Max Lift height 56ft 10in
3. Max reach of 42ft
4. Minimum mast tilt of -7 degrees lowered and 70 degrees fully extended.
5. Overhead guard rated at capacity of the lift for protection of the operator.
6. 48 in carriage and pallet forks.
7. Four wheel design all with fenders and full time 4WD/4WS.
8. Full gauge cluster with engine diagnostic display with battery discharge indicator, hour meter, reverse motion alarm & boom angle indicator.
9. Hydraulic power assisted steering.
10. 3 speed forward & reverse power shift transmission
11. Rear axle stabilization system, front axle differential lock, twin axle mounted stabilizers,
12. Air filled rough terrain tires
13. Enclosed Cab with A/C
14. ANSI/ITSDF B56.6, CSA B335 Standards Compliance
15. Standard manufacturer warranty Note: Add Line item # 13 Enclosed Cab with A/C.
File details come from the government source that posted it. Updated .