HC102821R0045 San Antonio PA solicitation.docx

HC102821R0045

Section SF 1449 - CONTINUATION SHEET

PWS

Performance Work Statement (PWS) For Public Address (PA) System Repair Data Center San Antonio April 21, 2021

Award

Contract Number:

Task Order Number:

Contractor Name

1. Contracting Officer’s Representative (COR).

a. Primary COR.

Name:

Organization:

Address:

Phone Number:

E-Mail Address:

b. DISA Technical POC.

Name:

Organization:

Address:

Phone Number:

E-Mail Address:

c. Data Center San Antonio Site POC Name:

Organization:

Address:

Phone Number:

E-Mail Address:

2. Contract or Task Order Title. Public Address System Repair, Data Center San Antonio

3. Background. Public Address System for mass notification provides real-time information and instructions to people in the building and surrounding area using intelligible voice communications. The Data Center San Antonio does not currently have a fully functioning public address system for mass notification which is required for mission security and life safety.

4. Objectives. Replace the existing Public Address system at the Defense Information Systems Agency (DISA) San Antonio Data Center with a mass notification PA system. The new system shall be compatible with the existing building fire alarm system.

5. Scope. Replace the existing Public Address system at Data Center San Antonio with a fully operational PA system for mass notification public address system with audibly links to all administrative spaces, computer rooms, and common areas in and around the immediate exterior of Building 200. The PA mass notification system shall interface with the fire alarm notification system and have ability for pre-recorded messages and announcements to be saved and activated through the phone system when required and have paging capability. Work includes removal of old equipment and installation of new equipment, electrical connections, testing and commissioning, labeling, and parts and labor warranty.

5.1 Task 1 – Project Management. Develop a work plan through site investigation of existing conditions to include a project schedule, installation schematics and shop drawings for approval by the Government. Floor plans with reflective ceiling layouts are provided at Appendix A. Submit product data sheets for approval. Schedule project meetings and record meeting minutes, maintain a clean work area, provide notification of hazardous conditions, and follow applicable Standards and Guidelines as listed within this PWS.

5.2 Task 2 – PA System Installation. Install a Public Address system equipment for mass notification that shall be compatible with the fire alarm system and have a Paging interface. The system shall have specific features and functions to include: pre-recorded messages and announcements to be saved and activated through the phone system when required, and utilize existing PA speakers if compatible. The PA system shall be integrated with the existing speaker system to ensure proper announcement functions. Provide additional speakers throughout the facilities for intelligibility to accommodate public address for mass notification, paging, and maintaining fire alarm notification to buildings occupants. Remove and dispose off-site in an environmentally safe manner all existing out-of-date public address system to include unnecessary speakers, legacy wiring, amplifiers and other components.

5.3 Task 3 – System Test. Conduct testing of the Public Address system throughout the facility to ensure the system meets current building and fire codes and the requirements of Unified Facilities Criteria (UFC) 4-021-01 at Appendix B. The test shall be in accordance with the National Fire Protection Association (NFPA) 3, Recommended Practice for Commissioning and Integrated Testing of Fire Protection and Life Safety Systems.

5.4 Task 4 – Project Close-out Documents. The contractor shall provide Operation and Maintenance (O&M) training and project completion documents included in an O&M binder with equipment manuals, drawings, parts list, and written warrantee(s).

6. Performance Requirements.

6.1 Task 1: Project Management. The contractor shall provide project management to execute the requirements per this PWS based on site investigation of existing conditions and prepared project schedule, shop drawings, and product data sheets provided to the Government for approval. The contractor shall identify systems and process steps involved, installation sequence, conveyance paths, and the rooms where work will be performed.

6.1.1 Subtask 1.1 - Investigate Existing Conditions. The contractor shall perform investigation of existing conditions and review the as-built drawings to gather information on existing conditions and have a complete understanding of existing conditions and required work. The contractor shall investigate and verify all existing conditions, including, but not limited to working conditions, access, and other items/systems. DISA’s existing record drawings are available to the contractor, but these record drawings shall not be viewed as complete and accurate. The contractor shall field verify all existing conditions and verify from field surveys that conveyance paths and equipment locations are free of obstructions.

6.1.2 Subtask 1.2 - Project Schedule. The contractor shall submit a detailed project schedule in MS Project® format or similar program identifying key dates of the system installation for review and approval. Schedule shall use ‘critical path’ method and identify all milestones; the schedule shall include start date, submittal dates, equipment installation dates, and testing and commissioning dates as a minimum. The Project Schedule shall be reviewed at recurring Progress Meetings.

6.1.3 Subtask 1.3 – Submittals. The contractor shall submit Product Data Sheets with equipment specifications to meet requirements of this PWS, testing and commissioning plan, installation drawings, for review and acceptance by the Government. Prepare and submit detailed installation schematics and shop drawings with PA system components identified to include location of amplifiers, control panels, and speakers. DISA’s existing record drawings will be made available to the contractor, but these record drawings should not be viewed as complete and accurate. The contractor shall field verify all existing conditions. Allow 14 calendar days for Government review of each submittal.

0. Product Data Sheets of PA System equipment shall be submitted for review and approval prior to ordering equipment.

0. Installation Drawings. Contractor shall submit installation scheme plans and shop drawings in AutoCAD 2021® compatible DWG and PDF formats for approval. All measurements on project drawings shall be in United States Customary System (USCS) units. Update existing or if unavailable generate new AutoCAD 2021® compatible as-built drawings and PDF format drawings reflecting existing configuration. Drawings shall include layout and details of the system components. The contractor shall update supplied AutoCAD Planning drawings to show current system configuration to include:

(a) Location of discovered abandoned-in-place PA systems, equipment, components, and conveyances.

(b) Location of all conduit, equipment, and component as part of this project.

(c) No IT equipment (racks, cabinets, telephone switches) shall be shown on any drawings.

(d) All ceiling, floor and wall penetrations/openings with a general detail showing the proper remediation for each type of penetration/opening shall be provided with classification of sealant required.

(e) Redline drawings shall be provided in electronic and hard-copy format by the designer through the government contracting office to the technical engineer at the end of the project in AutoCAD 2015 compatible and PDF formats prior to final project close-out. Two (2) sets of hardcopy drawings in not less than ANSI ‘C’ size are required for all formal transmittals. Transmittals shall be made simultaneously to the project Technical POC and the DISA Facility Manager at the site

0. Subtask 1.4 – Project Meetings. The contractor shall conduct a project Kick-off meeting within 14 calendar days of Notice to Proceed (NTP) and recurring project status meetings, no less than monthly, over conference calls with e-mailed meeting minutes within 3 calendar days of meetings to include review of schedule progress and any project issues.

0. Subtask 1.5 – General Requirements.

6.1.5.1 Dust-Free Work Environment. Clean work areas at least once a day and remove debris from inside the building daily. No dust can be generated in some areas. Use HEPA filter vacuums and use tack-pads (at room entrances) in rooms with IT equipment. Do not carry out any cutting operations inside the building.

6.1.5.2. Applicable Standards and Guidelines. When there are conflicts between codes and standards that are not specifically addressed in this PWS, the more stringent shall apply. The codes, standards and publications most current at the date of contract acceptance shall be those referenced for the design. All work shall be done in accordance with the latest version(s) and/or edition(s) of the following codes and standards:

· National Fire Protection Association (NFPA) 3 Recommended Practice for Commissioning and Integrated Testing of Fire Protection and Life Safety Systems

· NFPA 70 National Electrical Code

· NFPA 70E Standard for Electrical Safety in the Workplace

· NFPA 72 National Fire Alarm and Signaling Code

· NFPA 101 Life Safety Code Handbook

· International Building Code (IBC)

· UFC 4-021-01, Design and O&M: Mass Notification Systems, Change 1, Jan 2010 (Appendix B)

· United States Army Corp of Engineers (USACE) Engineer Research and Development Center (A/E/C) Computer Aided Design (CAD) Standard Release 6

Deliverables:

Prior to ordering equipment

* Standard Distribution: One (1) electronic copy of the transmittal letter without the deliverable to the Contracting Officer; one (1) hardcopy of the transmittal letter with the electronic deliverables to the COR; one (1) hardcopy and one electronic copy of the transmittal letter with the deliverable to DISA San Antonio Security Manager.

0. Task 2: PA System Installation.

0. Subtask 2.1 – P A System Installation. The contractor shall install the PA system throughout the DISA buildings based on the installation plan approved by the Government. The system shall allow pre-recorded messages and announcements to be saved and activated through the phone system when required, and utilize existing PA speakers if compatible. The PA system shall be integrated with the existing speaker system to ensure proper announcement functions and have a Paging interface capability. All equipment shall be installed per the manufacturer’s recommendations by manufacturer’s certified technicians.

0. The PA system shall have two access control points for head-end systems, a primary in the Security Management Office, Room 112, and secondary system in the Site Manager’s office, Room 105. Specific locations to be coordinated with the site Security Manager.

0. The head-end equipment shall include: Announcement Control System, Multi-channel Network Amplifier, and a Touch Screen Digital Communication Station.

0. Announcement Control System shall be plug and play ready, support Voice of Internet Protocol (VoIP) and allow announcements, pre-recorded messages, and paging functions.

0. Multi-channel Network Amplifier shall have two each 600-watt 70V/100V configuration level, networkable, with a minimum of four balanced line inputs.

0. Touch Screen Digital Communication Station shall have a fully programmable touch screen user interface, supervision of the microphone element, handheld version, Network Ready with Redundant Ethernet ports, Power over Ethernet (PoE), and integrated digital messaging over the network capability.

0. PA system interconnections shall be made using fiber communication connections within the main DISA Building 200.

0. PA system shall connect to existing fire alarm system speakers, ensuring the PA system does not interfere, but is compatible with the fire alarm system speakers.

0. Provide additional speakers or horns throughout the facilities for intelligibility to accommodate public address for mass notification and fire alarm notification to buildings occupants. Utilize existing PA speakers where available and compatible. Ensure no dead zones where announcements cannot be heard audibly over equipment noises.

0. All ceiling, floor and wall penetrations and openings created to run cabling shall be properly remediated for each type of penetration/opening with sealant as required.

0. Remove existing out-of-date public address systems.

0. Wiring, conduits and fittings shall comply with NFPA 70.

0. Subtask 2.2 – PA System Connection to Remote shelters. The contractor shall provide connection to the two remote emergency generator shelters and speakers.

0. Subtask 2.3 – Systems, Equipment, and Components (SEC) Equipment Inventory. The contractor shall provide a Systems, Equipment, and Components (SEC) Equipment Inventory spreadsheet as provided in Appendix C - SEC spreadsheet format of all new or replaced equipment shall be provided with the following information: make, model number, serial number, capacity, capacity units, building number, room number, raised floor grid number (as applicable), date installed, warranty expiration date, and SEC label designator for all added or removed, modified or altered equipment under this contract at the completion of PA system installation.

0. Subtask 2.4 – Warranty. The contractor shall provide a minimum one-year parts and labor on all installed equipment with a written warranty letter including warranty points of contact information. The warranty period shall start upon acceptance of final testing of installed equipment.

Deliverables:

* Standard Distribution: One (1) electronic copy of the transmittal letter without the deliverable to the Contracting Officer; one (1) hardcopy of the transmittal letter with the electronic deliverables to the COR; one (1) hardcopy and one electronic copy of the transmittal letter with the deliverable to DISA San Antonio Security Manager.

0. Task 3: System Testing.

0. Subtask 3.1 – System Testing. The contractor shall provide testing of the installed system and equipment in accordance with manufacturer’s procedures. The PA system shall meet current building and fire codes in accordance with NFPA 3, NFPA 72, and in accordance with UFC 4-021-01 (Appendix B). Ensure no interference to the fire alarm system. The test shall be in accordance with the National Fire Protection Association (NFPA) 3, Recommended Practice for Commissioning and Integrated Testing of Fire Protection and Life Safety Systems.

0. Subtask 3.2 – Functional Test Report. The contractor shall provide written test report at completion of Functional Testing. Testing shall include all performance testing of controls, messaging, and sound levels.

Deliverables:

* Standard Distribution: One (1) electronic copy of the transmittal letter without the deliverable to the Contracting Officer; one (1) hardcopy of the transmittal letter with the electronic deliverables to the COR; one (1) hardcopy and one electronic copy of the transmittal letter with the deliverable to DISA San Antonio Security Manager.

0. Task 4: Project Close-out Documents. The contractor shall provide O&M training and project completion documents to include equipment Operation and Maintenance (O&M) binder and written warrantee(s).

1. Subtask 4.1 - O&M Training. The contractor shall provide the required training to use/maintain the new equipment, conducted at the project site within 30 days prior to substantial completion of the installation for a period of not more than one (1) day. Training shall include at a minimum: Physical layout of each piece of equipment; Configuration, Operating, Troubleshooting, and Diagnostics procedures; and Preventative maintenance procedures and schedules. The contractor shall provide the operations manuals and review the operations for the training.

1. Subtask 4.2 - Operation & Maintenance (O&M) Binder(s). The project shall require one (1) set of hard copy and two (2) sets of soft copies of O&M binders be provided to DISA at least 30 days before substantial completion. One set of hard and soft copies each are to be distributed to the site, and one soft copy to the DISA SEL42 facilities engineer. The O&M binders shall include:

1. Installation and Operation & Maintenance manuals for all items of equipment

1. Drawings of final equipment installation floor plan and Red-Line drawings (showing changes to original plans).

1. Systems, Equipment, and Components (SEC) Equipment Inventory spreadsheet (Appendix C).

1. Spare parts list shall be provided based on equipment manufacturers’ recommendations.

1. System test reports and commissioning documents.

1. Training documents.

1. Warranty letter with points of contact information.

Deliverables:

* Standard Distribution: One (1) electronic copy of the transmittal letter without the deliverable to the Contracting Officer; one (1) hardcopy of the transmittal letter with the electronic deliverables to the Primary COR; one (1) hardcopy and one electronic copy of the transmittal letter with the deliverable to DISA San Antonio Security Manager.

1. Performance Standards.

6.1 Task 1: Project Management Plan

8. Incentives. None

9. Place of Performance. 3326 General Hudnell Drive, Building 200, San Antonio TX 78226

10. Period of Performance. The Period of Performance is six (6) months after award.

11. Security Requirements.

All equipment installation work under this requirement is UNCLASSIFIED. All personnel working in the facility shall be escorted and must comply with facility security policies and guidelines. Personal electronic devices, including cell phones, Wi-Fi and Bluetooth devices are not allowed in Government restricted/controlled areas. Such devices include, but are not limited to, phones, tablets, computers, fit-bits, and power tool that are not allowed in most areas of the building. All personnel must attend a security briefing on site prior to being accessing the facility. The primary point of contact for security and facility access issues is the Data Center San Antonio POC. All documents, both hardcopy and electronic media, shall be clearly marked, “UNCLASSIFIED – FOR OFFICIAL USE ONLY”. All information relating to the project must be protected against release to the general public. Hardcopies of documents, including CD’s, shall be shredded before disposal. The contractor shall comply with Security Requirements. Contractors will be required to apply for temporary access to the base to gain entrance through the gate and be able to drive to the work site.

The contractor shall coordinate site visits with site POCs at least 72 hours prior to requiring any site access. Contractor personnel without security clearances performing any task under this PWS must be escorted by Government personnel who are cleared.

This section shall be considered a supplement to Block 13 of the Government provided DD Form 254, DoD Contract Security Classification Specification. The following security requirements shall apply to this effort.

References:

1. DISA Form 786, DISA Statement of Information System Use and Acknowledgement of User Responsibilities

1. DISA Policy Letter, Unauthorized Connections to Network Devices, 11 September 2013

1. DISA Instruction 240-110-8, Information Security

1. DISA Instruction 240-110-36, Personnel Security

1. DISA Instruction 240-110-38, Industrial Security

1. DISA Instruction 240-110-43, Insider Threat Program

1. DISA Instruction 630-230-19, Cybersecurity

1. DoDM 5200.01, Vol 1-4 Information Security Program, 24 February 2012

1. DOD 5200.02, Procedures for the DoD Personnel Security Program, 3 April 2017

1. DOD 5220.22-M, National Industrial Security Program Operating Manual, February 2006 Incorporating Change 02 May 2016

11.1 Facility Security Clearance. The work to be performed under this contract/order is Unclassified. Therefore the company does not require a Secret Facility Clearance.

11.2 Security Clearance and Information Technology (IT) Level. All personnel performing on or supporting a DISA contract/order in any way shall be U.S. citizens. The personnel security requirements for this contract/order cover the individuals supporting the Task Areas delineated in the table below.

11.3 Investigation Requirements. Not Applicable.

11.4 Adjudication for Secret IT-I access. Not Applicable.

11.5 Visit Authorization Letters (VAL). All personnel performing on or supporting a DISA contract/order in any way shall be U.S. citizens. Visit requests shall be processed and verified through the Joint Personnel Adjudication System (JPAS) to SMO DKAWKE (DISA San Antonio). JPAS visits for contracts are identified as “Other” or “TAD/TDY” and will include the Contract/Order Number and ADP/IT-Access Level of the contract/order in the Additional Information section. Contractors that do not have access to JPAS may submit visit authorizations by e-mail in a password protected .pdf to the Contracting Officer Representative (COR) or Alternate COR specified in PWS Section 1.0.

If JPAS is not available, the VAL must contain the following information on company letterhead:

· Company’s name, address, telephone number, assigned CAGE Code, facility security clearance

· CAGE Code

· Contract/Order Number

· Name, SSN, date and place of birth, and citizenship of the employee intending to visit

· Certification of personnel security clearance and any special access authorizations required for the visit (type of investigation & date, adjudication date & agency, and IT access level).

· Name of COR/Alt COR

· Dates or period the VAL is to be valid.

11.6 Security Contacts. DISA Security Personnel can be contacted for Industrial Security related issues at (301)225-1235 or via mail at:

11.6.1 Data Center San Antonio specific security related matters shall be worked directly with the Data Center Security Manager at:

Name: Jessica Hopkins -or- Dewain Freeman Phone Number: (210) 672-3102 E-mail: disa.jbsa.opa.mbx.security-mgmt-office@mail.mil

11.7 Information Security and other miscellaneous requirements.

11.7.1 Contractor personnel shall comply with all local security requirements including entry and exit control for personnel and property at the government facility.

11.7.2 Contractor employees shall be required to comply with all Government security regulations and requirements. Initial and periodic safety and security training and briefings will be provided by Government security personnel. Failure to comply with Government security regulations and requirements shall require the company to provide the Government with a written remediation/corrective action plan; furthermore, failure to comply with such requirements can be cause for removal and the contractor will not be able to provide service on this contract/order.

11.7.3 Contractor employees with an incident report in JPAS who have had their access to classified suspended will not be permitted to fill positions requiring access to classified information on a DISA contract/order.

11.7.4 The Contractor shall not divulge any information, classified or unclassified, about DoD files, data processing activities or functions, user identifications, passwords, or any other knowledge that may be gained, to anyone who is not authorized to have access to such information. The Contractor shall observe and comply with the security provisions in effect at the DoD facility. Identification shall be worn and displayed as required.

11.7.5 DISA retains the right to request removal of contractor personnel regardless of prior clearance or adjudication status, whose actions, while assigned to this contract, clearly conflict with the interest of the Government.

11.7.6 Contractor personnel will generate or handle documents that contain For Official Use Only information at the Government facility. Contractor shall have access to, generate, and handle classified material only at the location(s) listed in the place of performance section of this document. All contractor deliverables shall be marked in accordance with DoDM 5200.1, Vol. 3, Vol. 4, Information Security, DoD 5400.7-R, Freedom of Information Act Program, unless otherwise directed by the Government. The contractor shall comply with the provisions of the DoD Industrial Security Manual for handling classified material and producing deliverables. The contractor shall comply with DISA Instruction 630-230-19, Cybersecurity.

11.7.7 The Contractor shall afford the Government access to the contractor’s facilities, installations, operations, documentation, databases and personnel used in performance of the contract. Access shall be provided to the extent required to carry out a program of IT inspection (to include vulnerability testing), investigation and audit to safeguard against threats and hazards to the integrity, availability and confidentiality of data or to the function of information technology systems operated on behalf of DISA or DoD, and to preserve evidence of computer crime.

12. Government Furnished Property (GFP)/Government-Furnished Equipment (GFE)/Government-Furnished Information (GFI). Not Applicable.

13. Other Pertinent Information or Special Considerations. Not Applicable.

a. Identification of Possible Follow-on Work. Not Applicable.

b. Identification of Potential Conflicts of Interest (COI). Not Applicable.

c. Identification of Non-Disclosure Requirements. Not Applicable.

d. Packaging, Packing and Shipping Instructions.

The delivery information in Paragraph 1 above is for US Postal Mail. Contact the COR or TM for FedEx or other courier deliveries. Outer packages shall not have any special marking other than standard information used in common business practice. Documents, CDs, etc. shall be marked in accordance with Paragraph 12 above. For electronic submissions, documents shall be submitted in searchable (not scanned) Adobe Acrobat version 10 or later. Shop drawings shall be in AutoCAD (.dwg) 2021 format in addition to, not in lieu of, Adobe Acrobat (.pdf). All electronic files shall be scanned for viruses prior to submission. Email transmittal of electronic documents is acceptable, providing each document does not exceed 5Mb attached file size. Multiple files to meet this requirement are acceptable

e. Inspection and Acceptance Criteria.

Inspection shall be performed by visual observation by Government representatives. Successful system demonstration is required by the contractor prior to Government acceptance.

f. Property Accountability. Not Applicable.

g. Transitioning. Not Applicable.

h. Supply Chain Risk Management (SCRM). Not Applicable

i. Training. Not Applicable

14. Section 508 Accessibility Standards. The following Section 508 Accessibility Standard(s) (Technical Standards and Functional Performance Criteria) are applicable (if box is checked) to this acquisition.

Technical Standards

|_| 1194.21 - Software Applications and Operating Systems |_| 1194.22 - Web Based Intranet and Internet Information and Applications |_| 1194.23 - Telecommunications Products |_| 1194.24 - Video and Multimedia Products |_| 1194.25 - Self-Contained, Closed Products |_| 1194.26 - Desktop and Portable Computers |_| 1194.41 - Information, Documentation and Support

The Technical Standards above facilitate the assurance that the maximum technical standards are provided to the Offerors. Functional Performance Criteria is the minimally acceptable standards to ensure Section 508 compliance. This block is checked to ensure that the minimally acceptable electronic and information technology (E&IT) products are proposed.

Functional Performance Criteria

|_| 1194.31 - Functional Performance Criteria

List of Appendices:

Appendix A – Floor Plans Appendix B – Unified Facilities Criteria (UFC) 4-021-01 Appendix C – Systems, Equipment, and Components (SEC) Spreadsheet

WAGE DETERMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5253 Daniel W. Simms Division of | Revision No.: 12 Director Wage Determinations| Date Of Last Revision: 12/21/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2021. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Texas

Area: Texas Counties of Atascosa Bandera Bexar Comal Guadalupe Kendall Medina Wilson

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.45 01012 - Accounting Clerk II 17.35 01013 - Accounting Clerk III 19.41 01020 - Administrative Assistant 26.99 01035 - Court Reporter 29.44 01041 - Customer Service Representative I 12.60 01042 - Customer Service Representative II 14.17 01043 - Customer Service Representative III 15.46 01051 - Data Entry Operator I 14.68 01052 - Data Entry Operator II 16.02 01060 - Dispatcher Motor Vehicle 18.48 01070 - Document Preparation Clerk 16.02 01090 - Duplicating Machine Operator 16.02 01111 - General Clerk I 12.95 01112 - General Clerk II 14.13 01113 - General Clerk III 15.86 01120 - Housing Referral Assistant 20.74 01141 - Messenger Courier 14.50 01191 - Order Clerk I 14.80 01192 - Order Clerk II 16.14 01261 - Personnel Assistant (Employment) I 17.04 01262 - Personnel Assistant (Employment) II 19.23 01263 - Personnel Assistant (Employment) III 21.26 01270 - Production Control Clerk 22.22 01290 - Rental Clerk 14.90 01300 - Scheduler Maintenance 16.63 01311 - Secretary I 16.63 01312 - Secretary II 18.61 01313 - Secretary III 20.74 01320 - Service Order Dispatcher 16.52 01410 - Supply Technician 26.99 01420 - Survey Worker 16.65 01460 - Switchboard Operator/Receptionist 13.14 01531 - Travel Clerk I 15.82 01532 - Travel Clerk II 16.80 01533 - Travel Clerk III 17.65 01611 - Word Processor I 15.76 01612 - Word Processor II 17.70 01613 - Word Processor III 19.80 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 20.44 05010 - Automotive Electrician 19.63 05040 - Automotive Glass Installer 18.33 05070 - Automotive Worker 18.33 05110 - Mobile Equipment Servicer 15.87 05130 - Motor Equipment Metal Mechanic 20.85 05160 - Motor Equipment Metal Worker 18.33 05190 - Motor Vehicle Mechanic 20.85 05220 - Motor Vehicle Mechanic Helper 14.75 05250 - Motor Vehicle Upholstery Worker 17.09 05280 - Motor Vehicle Wrecker 18.33 05310 - Painter Automotive 19.63 05340 - Radiator Repair Specialist 18.33 05370 - Tire Repairer 12.63 05400 - Transmission Repair Specialist 20.85 07000 - Food Preparation And Service Occupations 07010 - Baker 13.05 07041 - Cook I 13.42 07042 - Cook II 15.50 07070 - Dishwasher 10.63 07130 - Food Service Worker 13.09 07210 - Meat Cutter 16.62 07260 - Waiter/Waitress 9.23 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 16.53 09040 - Furniture Handler 10.93 09080 - Furniture Refinisher 17.26 09090 - Furniture Refinisher Helper 12.97 09110 - Furniture Repairer Minor 15.04 09130 - Upholsterer 17.26 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.51 11060 - Elevator Operator 11.51 11090 - Gardener 17.74 11122 - Housekeeping Aide 12.36 11150 - Janitor 12.36 11210 - Laborer Grounds Maintenance 13.89 11240 - Maid or Houseman 10.95 11260 - Pruner 12.51 11270 - Tractor Operator 16.48 11330 - Trail Maintenance Worker 13.89 11360 - Window Cleaner 13.72 12000 - Health Occupations 12010 - Ambulance Driver 17.43 12011 - Breath Alcohol Technician 19.66 12012 - Certified Occupational Therapist Assistant 37.60 12015 - Certified Physical Therapist Assistant 34.93 12020 - Dental Assistant 17.64 12025 - Dental Hygienist 37.06 12030 - EKG Technician 26.71 12035 - Electroneurodiagnostic Technologist 26.71 12040 - Emergency Medical Technician 17.43 12071 - Licensed Practical Nurse I 17.60 12072 - Licensed Practical Nurse II 19.70 12073 - Licensed Practical Nurse III 21.96 12100 - Medical Assistant 14.96 12130 - Medical Laboratory Technician 22.05 12160 - Medical Record Clerk 17.89 12190 - Medical Record Technician 20.02 12195 - Medical Transcriptionist 13.76 12210 - Nuclear Medicine Technologist 33.53 12221 - Nursing Assistant I 11.46 12222 - Nursing Assistant II 12.88 12223 - Nursing Assistant III 14.06 12224 - Nursing Assistant IV 15.79 12235 - Optical Dispenser 15.68 12236 - Optical Technician 15.20 12250 - Pharmacy Technician 17.51 12280 - Phlebotomist 15.18 12305 - Radiologic Technologist 29.67 12311 - Registered Nurse I 24.40 12312 - Registered Nurse II 29.85 12313 - Registered Nurse II Specialist 29.85 12314 - Registered Nurse III 36.11 12315 - Registered Nurse III Anesthetist 36.11 12316 - Registered Nurse IV 43.28 12317 - Scheduler (Drug and Alcohol Testing) 24.35 12320 - Substance Abuse Treatment Counselor 21.02 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 20.96 13012 - Exhibits Specialist II 25.97 13013 - Exhibits Specialist III 31.76 13041 - Illustrator I 20.55 13042 - Illustrator II 25.47 13043 - Illustrator III 29.28 13047 - Librarian 28.76 13050 - Library Aide/Clerk 13.62 13054 - Library Information Technology Systems 25.97 Administrator 13058 - Library Technician 16.09 13061 - Media Specialist I 18.74 13062 - Media Specialist II 20.96 13063 - Media Specialist III 23.37 13071 - Photographer I 18.74 13072 - Photographer II 20.96 13073 - Photographer III 25.18 13074 - Photographer IV 28.67 13075 - Photographer V 34.79 13090 - Technical Order Library Clerk 17.25 13110 - Video Teleconference Technician 18.24 14000 - Information Technology Occupations 14041 - Computer Operator I 16.14 14042 - Computer Operator II 18.05 14043 - Computer Operator III 20.12 14044 - Computer Operator IV 22.36 14045 - Computer Operator V 24.76 14071 - Computer Programmer I (see 1) 22.64 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.14 14160 - Personal Computer Support Technician 22.36 14170 - System Support Specialist 30.98 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.36 15020 - Aircrew Training Devices Instructor (Rated) 35.53 15030 - Air Crew Training Devices Instructor (Pilot) 42.58 15050 - Computer Based Training Specialist / Instructor 29.36 15060 - Educational Technologist 33.62 15070 - Flight Instructor (Pilot) 42.58 15080 - Graphic Artist 25.52 15085 - Maintenance Test Pilot Fixed Jet/Prop 42.58 15086 - Maintenance Test Pilot Rotary Wing 42.58 15088 - Non-Maintenance Test/Co-Pilot 42.58 15090 - Technical Instructor 22.73 15095 - Technical Instructor/Course Developer 27.82 15110 - Test Proctor 18.36 15120 - Tutor 18.36 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.71 16030 - Counter Attendant 9.71 16040 - Dry Cleaner 11.79 16070 - Finisher Flatwork Machine 9.71 16090 - Presser Hand 9.71 16110 - Presser Machine Drycleaning 9.71 16130 - Presser Machine Shirts 9.71 16160 - Presser Machine Wearing Apparel Laundry 9.71 16190 - Sewing Machine Operator 12.45 16220 - Tailor 13.05 16250 - Washer Machine 10.52 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 20.50 19040 - Tool And Die Maker 25.60 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 15.51 21030 - Material Coordinator 22.22 21040 - Material Expediter 22.22 21050 - Material Handling Laborer 13.88 21071 - Order Filler 13.56 21080 - Production Line Worker (Food Processing) 15.51 21110 - Shipping Packer 15.49 21130 - Shipping/Receiving Clerk 15.49 21140 - Store Worker I 11.37 21150 - Stock Clerk 15.34 21210 - Tools And Parts Attendant 15.51 21410 - Warehouse Specialist 15.51 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 27.66 23019 - Aircraft Logs and Records Technician 21.45 23021 - Aircraft Mechanic I 26.16 23022 - Aircraft Mechanic II 27.66 23023 - Aircraft Mechanic III 29.17 23040 - Aircraft Mechanic Helper 18.50 23050 - Aircraft Painter 24.62 23060 - Aircraft Servicer 21.45 23070 - Aircraft Survival Flight Equipment Technician 24.62 23080 - Aircraft Worker 23.00 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 23.00 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 26.16

II

23110 - Appliance Mechanic 22.01 23120 - Bicycle Repairer 17.52 23125 - Cable Splicer 29.53 23130 - Carpenter Maintenance 19.14 23140 - Carpet Layer 18.53 23160 - Electrician Maintenance 23.39 23181 - Electronics Technician Maintenance I 24.05 23182 - Electronics Technician Maintenance II 25.75 23183 - Electronics Technician Maintenance III 27.36 23260 - Fabric Worker 18.87 23290 - Fire Alarm System Mechanic 22.48 23310 - Fire Extinguisher Repairer 17.52 23311 - Fuel Distribution System Mechanic 19.42 23312 - Fuel Distribution System Operator 15.76 23370 - General Maintenance Worker 16.66 23380 - Ground Support Equipment Mechanic 26.16 23381 - Ground Support Equipment Servicer 21.45 23382 - Ground Support Equipment Worker 23.00 23391 - Gunsmith I 17.52 23392 - Gunsmith II 20.23 23393 - Gunsmith III 23.01 23410 - Heating Ventilation And Air-Conditioning 24.12 Mechanic 23411 - Heating Ventilation And Air Contidioning 25.51 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 24.86 23440 - Heavy Equipment Operator 18.60 23460 - Instrument Mechanic 24.33 23465 - Laboratory/Shelter Mechanic 21.66 23470 - Laborer 13.88 23510 - Locksmith 18.73 23530 - Machinery Maintenance Mechanic 24.43 23550 - Machinist Maintenance 22.41 23580 - Maintenance Trades Helper 14.85 23591 - Metrology Technician I 24.33 23592 - Metrology Technician II 25.73 23593 - Metrology Technician III 27.13 23640 - Millwright 23.13 23710 - Office Appliance Repairer 17.42 23760 - Painter Maintenance 17.49 23790 - Pipefitter Maintenance 22.84 23810 - Plumber Maintenance 21.50 23820 - Pneudraulic Systems Mechanic 23.01 23850 - Rigger 19.79 23870 - Scale Mechanic 20.23 23890 - Sheet-Metal Worker Maintenance 19.00 23910 - Small Engine Mechanic 19.99 23931 - Telecommunications Mechanic I 23.50 23932 - Telecommunications Mechanic II 24.85 23950 - Telephone Lineman 26.30 23960 - Welder Combination Maintenance 20.01 23965 - Well Driller 18.89 23970 - Woodcraft Worker 23.01 23980 - Woodworker 17.52 24000 - Personal Needs Occupations 24550 - Case Manager 16.29 24570 - Child Care Attendant 9.97 24580 - Child Care Center Clerk 12.44 24610 - Chore Aide 10.57 24620 - Family Readiness And Support Services 16.29 Coordinator 24630 - Homemaker 16.29 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.50 25040 - Sewage Plant Operator 20.21 25070 - Stationary Engineer 23.50 25190 - Ventilation Equipment Tender 16.62 25210 - Water Treatment Plant Operator 20.21 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.65 27007 - Baggage Inspector 14.62 27008 - Corrections Officer 21.15 27010 - Court Security Officer 25.66 27030 - Detection Dog Handler 16.36 27040 - Detention Officer 21.15 27070 - Firefighter 27.34 27101 - Guard I 14.62 27102 - Guard II 16.36 27131 - Police Officer I 25.77 27132 - Police Officer II 28.63 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.12 28042 - Carnival Equipment Repairer 14.12 28043 - Carnival Worker 9.96 28210 - Gate Attendant/Gate Tender 15.38 28310 - Lifeguard 11.05 28350 - Park Attendant (Aide) 17.21 28510 - Recreation Aide/Health Facility Attendant 12.56 28515 - Recreation Specialist 19.65 28630 - Sports Official 13.70 28690 - Swimming Pool Operator 16.31 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.20 29020 - Hatch Tender 24.20 29030 - Line Handler 24.20 29041 - Stevedore I 22.57 29042 - Stevedore II 25.91 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.17 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.70 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.50 30021 - Archeological Technician I 17.56 30022 - Archeological Technician II 19.64 30023 - Archeological Technician III 24.33 30030 - Cartographic Technician 24.33 30040 - Civil Engineering Technician 27.46 30051 - Cryogenic Technician I 26.94 30052 - Cryogenic Technician II 29.76 30061 - Drafter/CAD Operator I 17.56 30062 - Drafter/CAD Operator II 19.64 30063 - Drafter/CAD Operator III 21.89 30064 - Drafter/CAD Operator IV 26.94 30081 - Engineering Technician I 15.91 30082 - Engineering Technician II 17.86 30083 - Engineering Technician III 19.98 30084 - Engineering Technician IV 24.75 30085 - Engineering Technician V 30.27 30086 - Engineering Technician VI 36.63 30090 - Environmental Technician 22.96 30095 - Evidence Control Specialist 24.33 30210 - Laboratory Technician 21.89 30221 - Latent Fingerprint Technician I 23.10 30222 - Latent Fingerprint Technician II 25.51 30240 - Mathematical Technician 28.72 30361 - Paralegal/Legal Assistant I 20.24 30362 - Paralegal/Legal Assistant II 25.07 30363 - Paralegal/Legal Assistant III 30.67 30364 - Paralegal/Legal Assistant IV 37.11 30375 - Petroleum Supply Specialist 29.76 30390 - Photo-Optics Technician 24.33 30395 - Radiation Control Technician 29.76 30461 - Technical Writer I 24.59 30462 - Technical Writer II 30.08 30463 - Technical Writer III 34.17 30491 - Unexploded Ordnance (UXO) Technician I 25.53 30492 - Unexploded Ordnance (UXO) Technician II 30.89 30493 - Unexploded Ordnance (UXO) Technician III 37.02 30494 - Unexploded (UXO) Safety Escort 25.53 30495 - Unexploded (UXO) Sweep Personnel 25.53 30501 - Weather Forecaster I 26.94 30502 - Weather Forecaster II 32.77 30620 - Weather Observer Combined Upper Air Or (see 2) 21.89 Surface Programs 30621 - Weather Observer Senior (see 2) 24.33 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.89 31020 - Bus Aide 14.96 31030 - Bus Driver 20.58 31043 - Driver Courier 14.51 31260 - Parking and Lot Attendant 10.78 31290 - Shuttle Bus Driver 15.62 31310 - Taxi Driver 12.86 31361 - Truckdriver Light 15.62 31362 - Truckdriver Medium 16.83 31363 - Truckdriver Heavy 19.94 31364 - Truckdriver Tractor-Trailer 19.94 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.06 99030 - Cashier 11.25 99050 - Desk Clerk 10.74 99095 - Embalmer 27.53 99130 - Flight Follower 25.53 99251 - Laboratory Animal Caretaker I 12.69 99252 - Laboratory Animal Caretaker II 13.66 99260 - Marketing Analyst 36.49 99310 - Mortician 28.38 99410 - Pest Controller 20.47 99510 - Photofinishing Worker 15.16 99710 - Recycling Laborer 17.89 99711 - Recycling Specialist 21.23 99730 - Refuse Collector 16.12 99810 - Sales Clerk 12.05 99820 - School Crossing Guard 13.57 99830 - Survey Party Chief 23.22 99831 - Surveying Aide 16.20 99832 - Surveying Technician 19.34 99840 - Vending Machine Attendant 13.78 99841 - Vending Machine Repairer 17.04 99842 - Vending Machine Repairer Helper 13.78

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor 3 weeks after 5 years and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541.