HANGAR DOOR SCOPE final repair.docx

CUI

INFORMATION SENSITIVE (FOR OFFICIAL USE ONLY)

Organization: AUG/TDA 1106th TASMG Contract Name: Horizontal Hangar Door Repair

Required delivery date(s): 15 JUN 23

Scope: The contractor shall provide all personnel, equipment, tools, materials, supervision, and quality control necessary to perform repair of the horizontal hangar doors. Requirements are listed below in requirements listing. The repairs are a one time service and shall take no more than 30 days to complete.

Objective: To be able to open and close the horizontal hangar doors via the existing control buttons.

Background: TASMG Hangar (5168 E. Dakota Ave, Fresno, Ca 93727) has inoperable horizontal hangar doors at the Corrosion Control Facility. The facility is located at the south end of the flightline. The inoperable doors currently hinder day to day operations and incur additional time required for maintenance personnel to move aircraft.

Requirements: The contractor shall:

1. Replace damaged busbar and necessary hardware

2. Reconnect all conductors

3. Lube points of friction, bearing and rollers

4. Balance and alignment of doors

5. Test door operation

Site of Work:

Project Manager: CW4 Lloyd Wilfong Duty Position: Facility Manager Phone Number: 559-347-5653 Email: lloyd.l.wilfong.nfg@army.mil

Scope prepared by: SSG Sourtanh Bounxou Duty Position: Purchasing & Contracting NCOIC Phone Number: 559-347-5689 Email: Sourtanh.y.bounxou.mil@army.mil

Organization: AUG/TDA 1106th TASMG Contract Name: Horizontal Hangar Door Repair

EXIT DOORS

D.P. Industries is the original program management company of hangar doors. Dave Payne and David Payne are no longer located in the state of California.

pg. 2 RFI image1.jpeg image2.jpeg image3.jpeg image4.jpeg image5.jpeg image6.jpeg image7.jpeg image8.jpeg image9.jpeg image10.jpeg