Attachment 1_PD_Wrestling Mat_Amend 01.pdf

PRODUCT DESCRIPTION

Naval Special Warfare Advanced Training Command (NSW ATC)

Wrestling Mats

1. BACKGROUND

1.1. NSW ATC requires wrestling mat(s) to support training. Due to the daily sustainment training and high number of NSW personnel training wrestling mat(s) are necessary with sufficient shock absorption to prevent injury to operators. The wrestling mat(s) will be used multiple times a day as an added layer of safety prevention.

2. OBJECTIVE

2.1. NSWATC DET Coronado Combatives Cell (N33T) requires wrestling mats to be used in the Combatives space as and added layer of operator safety. The new mats will lay over top of the existing mats, providing an added layer of shock absorbing support to prevent knee, shoulder, and head injuries during daily training.

2.2. The wrestling mat(s) shall be specifically designed to absorb and cushion the impacts that happen under normal wrestling conditions. In the interest of safety, The American Society of Testing and Materials (ASTM) International has established specifications for competition wrestling mats. These guidelines test the construction and durability of mats that pass for shock absorbing properties. A wrestling mat of this type will ensure the safety of NSW personnel training daily.

3. DESCRIPTION OF REQUIREMENT

3.1. Brand Name or Equal: Resilite, Classic Wrestling Mat(s) – Custom fit

3.2. The wrestling mat(s) shall be a total of approximately 3,576 square feet, designed to lay flat and seamless next to each other.

3.2.1. The wrestling mat(s) should come in three (3) approximately equal separate pieces for ease of movement

(made as a whole, then cut to fit, accounting for any shrinkage).

3.2.2. All three (3) wrestling mat pieces shall be black in color.

3.2.3. One (1) wrestling mat piece shall include a trident logo in gold color in the center.

3.2.3.1. The logo will be provided electronically to the contractor after award.

3.2.3.2. The logo shall be coated to prevent peeling.

3.3. Specifications/Salient Characteristics include, but are not limited to:

• The wrestling mat(s) shall be 1.25” Thick

• The wrestling mat(s) shall be Vinyl-Coated o Wrestling Mat foam shall be coated on all sides and edges using a hot-spray #457 Polyvinyl coating for added durability, cleaning purposes.

o Vinyl fabric-covered mats, or heat-laminated mats are not acceptable.

• Wrestling Mat(s) shall be two-sided to provide wrestling areas on both sides of the mat.

• Wrestling Mat(s) shall use a fire-retardant, elastomeric rubber nitrile foam core.

o Mats manufactured using a cross link, polyethylene foam are not acceptable.

o Foam Core shall have compression/deflation of 5.0-7.0 psi and meet ASTM testing standard D1056

“Specification for Flexible Cellular Materials-Sponge” (Fungus Prevention) o Foam Core shall have a tensile strength of 75 psi or greater and meet ASTM testing standard D412-

98A(2002)e1 “Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension.”

o Foam Core shall have an elongation property of 125% and meet ASTM testing standard D412-

98A(2002)e1 “Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension.”

• The Wrestling Mat(s) shall be tested by an independent laboratory in accordance with “Standard Specification for Competition Wrestling Mats.”

o The foam core shall have received a PASS rating of (<) 100 maximum G-max when tested in accordance with “Test Method for Shock Absorbing Properties of Playing Surface Systems and Materials.

o Mats that do not receive an average G-max range below 100 G-max are not acceptable.

o To further determine the mats ability to impact absorption the Wrestling Mat shall be tested for impact protection using an Electronic Impact Surface Tester such as the Triax 200, in accordance with

ASTM F-1292-04.

The wrestling mat(s) shall have a G-max reading of less than (<) 200 and a HIC score (Head Injury Criterion) of less than (<) 1,000 from a four foot drop height.

o Contractor shall be able to provide 3rd party, independent test results upon request.

• The following ASTM standards shall be met o ASTM D-1056 Compression Resistance @ 25% 5.5-7.5(psi) o ASTM D-1056 Compression Set @ 50% 25%(max) o ASTM D-1056 Density 4.0-7.0 (lb/ft3) o ASTM D-1056 Water Absorption % 10 max (%) o ASTM D-412 Tensile 75 min (psi) o ASTM D-412 Elongation 100 min. (%) o ASTM D-624 C-Tear Strength 17.5 min (lbs/in) o FMVSS302 Flammability – PASS o ASTM E648 Flammability- Critical Radiant Flux of Floor Coverings – PASS/Class I o ASTM D-1056 Temperature Use 0 (cold crack) 200 (high) o ASTM F-1081-03 Standard Specification for Competition Wrestling Mats – Meets or Exceeds o ASTM F-355-01 Test Method for Shock Absorbing Properties – PASS o ASTM F-1292-04 Impact Attenuation for Surface Materials (Free Fall Method) – PASS

• Wrestling Mat(s) shall have the standard industry warranty – which is guaranteed at least 3 years from the date of delivery.

• The wrestling mat(s) should be able to be used with any NCAA boxing or wrestling type shoe.

• The following shall be included;

o One wrestling mat storage tube for each piece (3 total) o At least 10 rolls of mat tape o Wrestling mat straps sufficient to store and move the mats

3.4. Quantity: See Section 3.2 above.

4. DELIVERY INFORMATION

4.1. Required delivery date: A maximum of 24 weeks after receipt of order.

4.2. Delivery POC Name: To be provided at time of award.

4.3. Delivery address: N33T Comabtives Cell, NAVSPECWARADVTRACOM, BLDG 272, 1 Hooper Blvd, Imperial

Beach, Ca 91932

4.4. Special instructions: Vendor will need an escort on to base and into building 272. The vendor will be monitored and always escorted. The vendor will not enter any other spaces in building 272.

5. SECURITY

5.1. N/A

6. QUALITY ASSURANCE

6.1. The Government reserves the right to perform inspections and surveillance to evaluate the Contractor’s compliance to the contract terms to include proper delivery of quantity and type of goods. The Government will make every effort to ensure that the surveillance methods used are conducted in an objective, fair, and consistent manner.