MAS - TMC Technologies Of West Virginia Corp - GS35F0359P

Federal Supply Schedule

Authorized

Federal Supply Service

Multiple Award Schedule (IT Category) Price List

General Purpose Commercial Information Technology Equipment Software and Services

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage System. Agencies can browse GSA Advantage by accessing the Federal Supply Service’s Home Page via the Internet at http://www.fss.gsa.gov/.

TMC Technologies of West Virginia Corp.

2050 Winners Drive Fairmont, WV 26554

304.816.3600 voice

304.816.3411 fax

Contract: GS‐35F‐0359P Period Covered By Contract:

3/15/2004 – 3/14/2024 Pricelist Current through Modification:

Mod 0052 9/24/2019 Special Item Numbers:

54151S

GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY

EQUIPMENT, SOFTWARE AND SERVICES

SIN 54151S - INFORMATION TECHNOLOGY (IT) PROFESSIONAL SERVICES

FPDS Code D301 IT Facility Operation and Maintenance FPDS Code D302 IT Systems Development Services FPDS Code D306 IT Systems Analysis Services FPDS Code D307 Automated Information Systems Design and Integration Services FPDS Code D308 Programming Services FPDS Code D310 IT Backup and Security Services FPDS Code D311 IT Data Conversion Services FPDS Code D313 Computer Aided Design/Computer Aided Manufacturing (CAD/CAM) Services FPDS Code D316 IT Network Management Services FPDS Code D317 Creation/Retrieval of IT Related Automated News Services, Data Services, or

Other Information Services (All other information services belong under Schedule 76)

FPDS Code D399 Other Information Technology Services, Not Elsewhere Classified

Note 1: All non-professional labor categories must be incidental to and used solely to support hardware, software and/or professional services, and cannot be purchased separately.

Note 2: Offerors and Agencies are advised that the Group 70 – Information Technology Schedule is not to be used as a means to procure services which properly fall under the Brooks Act. These services include, but are not limited to, architectural, engineering, mapping, cartographic production, remote sensing, geographic information systems, and related services. FAR 36.6 distinguishes between mapping services of an A/E nature and mapping services which are not connected nor incidental to the traditionally accepted A/E Services.

Note 3: This solicitation is not intended to solicit for the reselling of IT Professional Services, except for the provision of implementation, maintenance, integration, or training services in direct support of a product. Under such circumstances the services must be performance by the publisher or manufacturer or one of their authorized agents.

TMC Technologies of West Virginia Corp.

2050 Winners Drive Fairmont WV 26554

Telephone: (304) 816-3600 Fax: (304) 816-3411 www.tmctechnologies.com

Contract Number: GS-35F-0359P

Period Covered by Contract: March 15, 2004 through March 14, 2024

General Services Administration Federal Acquisition Service

Price list current through Modification #52, dated 9/24/2019

Products and ordering information in this Authorized FSS Information Technology Schedule Pricelist are also available on the GSA Advantage! System. Agencies can browse GSA Advantage! by accessing the Federal Acquisition Service’s Home Page via the Internet at http://www.fss.gsa.gov/.

http://www.tmctechnologies.com/ http://www.fss.gsa.gov/

TABLE OF CONTENTS

1. GEOGRAPHIC SCOPE OF CONTRACT:

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

3. LIABILITY FOR INJURY OR DAMAGE

4. STATICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD

FORM 279:

5. FOB DESTINATION: Shipment is FOB destination for all services offered under 132-51

6. DELIVERY SCHEDULE

7. DISCOUNTS:

8. TRADE AGREEMENTS ACT OF 1979, as amended:

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

10. SMALL REQUIREMENTS:

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.) 6

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY SCHEDULE

CONTRACTS. In accordance with FAR 8.404:

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS:

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

16. GSA ADVANTAGE!

17. PURCHASE OF OPEN MARKET ITEMS

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

19. OVERSEAS ACTIVITIES

20. BLANKET PURCHASE AGREEMENTS (BPAs)

BEST VALUE BLANKET PURCHASE AGREEMENT FEDERAL SUPPLY SCHEDULE

21. CONTRACTOR TEAM ARRANGEMENTS

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

23. SECTION 508 COMPLIANCE

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997) (FAR 52.228-5)

26. INDUSTRIAL FUNDING FEE

27. ADVANCE PAYMENTS

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES SPECIAL ITEM NUMBER (SIN) 132-51

1. SCOPE

2. PERFORMANCE INCENTIVES

3. ORDERING PROCEDURES FOR SERVICES (REQUIRING A STATEMENT OF WORK) (G-FCI-

920) (MAR 2003)

4. ORDER

5. PERFORMANCE OF SERVICES

6. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

7. INSPECTION OF SERVICES

8. RESPONSIBILITIES OF TMC TECHNOLOGIES OF WEST VIRGINIA CORP

9. RESPONSIBILITIES OF THE ORDERING ACTIVITY

10. INDEPENDENT CONTRACTOR

11. ORGANIZATIONAL CONFLICTS OF INTEREST

12. INVOICES

13. PAYMENTS

14. RESUMES

15. INCIDENTAL SUPPORT COSTS

16. APPROVAL OF SUBCONTRACTS

17. DESCRIPTION OF IT SERVICES AND PRICING

18. USA COMMITMENT TO PROMOTE SMALL BUSINESS PARTICIPATION PROCUREMENT

PROGRAMS

INFORMATION FOR ORDERING ACTIVITIES

APPLICABLE TO ALL SPECIAL ITEM NUMBERS

SPECIAL NOTICE TO AGENCIES: Small Business Participation SBA strongly supports the participation of small business concerns in the Federal Supplies Schedules Program. To enhance Small Business Participation SBA policy allows agencies to include in their procurement base and goals, the dollar value of orders expected to be placed against the Federal Supply Schedules, and to report accomplishments against these goals.

For orders exceeding the micro purchase threshold, FAR 8.404 requires agencies to consider the catalogs/pricelists of at least three schedule contractors or consider reasonably available information by using the GSA Advantage! on-line shopping service (www.fss.gsa.gov). The catalogs/pricelists, GSA

Advantage! and the Federal Supply Service Home Page (www.fss.gsa.gov) contain information on a broad array of products and services offered by small business concerns.

This information should be used as a tool to assist ordering activities in meeting or exceeding established small business goals. It should also be used as a tool to assist in including small, small disadvantaged, and women-owned small businesses among those considered when selecting pricelists for a best value determination.

For orders exceeding the micropurchase threshold, customers are to give preference to small business concerns when two or more items at the same delivered price will satisfy their requirement.

1. GEOGRAPHIC SCOPE OF CONTRACT:

The geographical scope of this contract is in the 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC, and U.S. Territories.

2. CONTRACTOR’S ORDERING ADDRESS AND PAYMENT INFORMATION:

Ordering & Payment Address: Contracts Administrator

TMC Technologies of WV Corp. Contracts Administrator 2050 Winners Drive P: (304)-816-3608 Fairmont, WV 26554 F: (304)-816-3411 URL: www.tmctechnologies.com e-mail: eric.mohan@tmctechnologies.com

TMC Technologies of West Virginia Corp. is required to accept credit cards for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Credit cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice. The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance:

Ordering Phone number: 304-816-3600 Fax: 304-816-3411

3. LIABILITY FOR INJURY OR DAMAGE

The Contractor shall not be liable for any injury to ordering activity personnel or damage to ordering activity property arising from the use of equipment maintained by TMC Technologies, unless such injury or damage is due to the fault or negligence of TMC Technologies.

mailto:eric.mohan@tmctechnologies.com

4. STATICAL DATA FOR GOVERNMENT ORDERING OFFICE COMPLETION OF STANDARD

FORM 279:

Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS) Number: 96-2024274 Block 30: Type of Contractor - B. Other Small Business Block 31: Woman-Owned Small Business - _No_ Block 36: Contractor's Taxpayer Identification Number (TIN): 27-1812321

4a. CAGE Code: 5Y6N7

4b. TMC Technologies of West Virginia Corp. has registered with the Central Contractor Registration Database.

5. FOB DESTINATION: Shipment is FOB destination for all services offered under 132-51.

FOB TERMS: FOB destination within 48 contiguous states, Alaska, Hawaii, Puerto Rico, Washington, DC.

6. DELIVERY SCHEDULE

a. TIME OF DELIVERY: The Contractor shall deliver to destination within the number of calendar days after receipt of order (ARO), as negotiated between the ordering agency and TMC Technologies of West Virginia Corp.

b. URGENT REQUIREMENTS: When the Federal Supply Schedule contract delivery period does not meet the bona fide urgent delivery requirements of an ordering activity, ordering activities are encouraged, if time permits, to contact TMC Technologies of West Virginia Corp. for the purpose of obtaining accelerated delivery. TMC Technologies shall reply to the inquiry within 3 workdays after receipt. (Telephonic replies shall be confirmed by TMC Technologies of in writing.) If TMC Technologies offers an accelerated delivery time acceptable to the ordering activity, any order(s) placed pursuant to the agreed upon accelerated delivery time frame shall be delivered within this shorter delivery time and in accordance with all other terms and conditions of the contract.

7. DISCOUNTS:

Prices shown are NET Prices; All Basic Discounts are negotiated on an individual basis.

a. Prompt Payment: No Prompt Payment Discounts

b. Quantity: No Standard Discount

c. Dollar Volume: No Dollar Volume Discounts

d. Government Educational Institutions: No Standard Discount - Offered the same discount as all other government customers.

e. Other: No Standard Discount

8. TRADE AGREEMENTS ACT OF 1979, as amended:

All items are U.S. made end products, designated country end products, Caribbean Basin country end products, Canadian end products, or Mexican end products as defined in the Trade Agreements Act of 1979, as amended.

9. STATEMENT CONCERNING AVAILABILITY OF EXPORT PACKING:

None

10. SMALL REQUIREMENTS:

The minimum dollar value of orders to be issued is $100.00.

11. MAXIMUM ORDER (All dollar amounts are exclusive of any discount for prompt payment.)

a. The Maximum Order value for the following Special Item Number (SIN) is $500,000.00:

Special Item Number 132-51 - Information Technology (IT) Professional Services

12. USE OF FEDERAL SUPPLY SERVICE INFORMATION TECHNOLOGY SCHEDULE CONTRACTS.

In accordance with FAR 8.404:

[NOTE: Special Ordering procedures have been established for Special Item Number (SIN) 132-51 IT Professional Services; refer to the terms and conditions.]

Orders placed pursuant to a Multiple Award Schedule (MAS), using the procedures in FAR 8.404, are considered to be issued pursuant to full and open competition. Therefore, when placing orders under Federal Supply Schedules, ordering offices need not seek further competition, synopsize the requirement, make a separate determination of fair and reasonable pricing, or consider small business set-asides in accordance with subpart 19.5. GSA has already determined the prices of items under schedule contracts to be fair and reasonable. By placing an order against a schedule using the procedures outlined below, the ordering office has concluded that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government’s needs.

a. Orders placed at or below the micro-purchase threshold Ordering offices can place orders at or below the micro-purchase threshold with any Federal Supply Schedule Contractor. Government purchase card(s) are accepted.

b. Orders exceeding the micro-purchase threshold but not exceeding the maximum order threshold Orders should be placed with the Schedule Contractor that can provide the supply or service that represents the best value. Government purchase card(s) are accepted. Before placing an order, ordering offices should consider reasonably available information about the supply or service offered under MAS contracts by using the “GSA Advantage!” on–line shopping service, or by reviewing the catalogs/pricelists of at least three Schedule Contractors and selecting the delivery and other options available under the schedule that meets the agency’s needs. In selecting the supply or service representing the best value, the ordering office may consider –

(1) Special features of the supply or service that are required in effective program performance and that are not provided by a comparable supply or service;

(2) Trade-in considerations;

(3) Probable life of the item selected as compared with that of a comparable item;

(4) Warranty considerations;

(5) Maintenance availability;

(6) Past performance; and

(7) Environmental and energy efficiency considerations.

c. Orders exceeding the maximum order threshold Each schedule contract has an established maximum order threshold. This threshold represents the point where it is advantageous for the ordering office to seek a price reduction. Government purchase card(s) are accepted. In addition, to following the procedures in paragraph b, above, and before placing an order that exceeds the maximum order threshold, ordering offices shall –

(1) Review additional Schedule Contractors’ catalogs/pricelists or use the “GSA Advantage!” on-line shopping service;

(2) Based upon the initial evaluation, generally seek price reductions from the Schedule Contractor(s) appearing to provide the best value (considering price and other factors); and

(3) After price reductions have been sought, place the order with the Schedule Contractor that provides the best value and results in the lowest overall cost alternative. If further price reductions are not offered, an order may still be placed, if the ordering office determines that it is appropriate.

NOTE: For order exceeding the maximum order threshold, the Contractor may:

(1) Offer a new lower price for this requirement (the Price Reduction FAR 52.216-19 Order Limitations);

(2) Offer the lowest price available under the contract; or

(3) Decline the order (orders must be returned in accordance with FAR 52.216-19).

d. Blanket purchase agreements (BPAs) The establishment of Federal Supply Schedule BPAs is permitted when following the ordering procedures in FAR 8.404. All schedule contracts contain BPA provisions. Ordering offices may use BPAs to establish accounts with Contractors to fill recurring requirements. BPAs should address the frequency of ordering and invoicing, discounts, and delivery locations and times.

e. Price reductions In addition to the circumstances outlined paragraph c, above, there may be instances where ordering offices will find it advantageous to request a price reduction. For example, when the ordering office finds a schedule supply or service elsewhere at a lower price or when a BPA is being established to fill recurring requirements, requesting a price reduction could be advantageous. The potential volume of orders under these agreements, regardless of the size of the individual order, may offer the ordering office the opportunity to secure greater discounts. Schedule Contractors are not required to pass on to all schedule users a price reduction extended only to an individual agency for a specific order.

f. Small business For orders exceeding the micro-purchase threshold, ordering offices should give preference to the items of small business concerns when two or more items at the same delivered price will satisfy the requirement.

g. Documentation Orders should be documented, at a minimum, by identifying the Contractor the item was purchased from, the item purchased, and the amount paid. If an agency requirement in excess of the micro-purchase threshold is defined so as to require a particular brand name, product, or feature of a product peculiar to one manufacturer, thereby precluding consideration of a product manufactured by another company, the ordering office shall include an explanation in the file as to why the particular brand name, product, or feature is essential to satisfy the agency’s needs.

13. FEDERAL INFORMATION TECHNOLOGY/TELECOMMUNICATION STANDARDS

REQUIREMENTS:

Ordering activities acquiring products from this Schedule must comply with the provisions of the Federal Standards Program, as appropriate (reference: NIST Federal Standards Index). Inquiries to determine whether or not specific products listed herein comply with Federal Information Processing Standards (FIPS) or Federal Telecommunication Standards (FED-STDS), which are cited by ordering activities, shall be responded to promptly by the Contractor.

13.1 FEDERAL INFORMATION PROCESSING STANDARDS PUBLICATIONS (FIPS PUBS):

Information Technology products under this Schedule that do not conform to Federal Information Processing Standards (FIPS) should not be acquired unless a waiver has been granted in accordance with the applicable "FIPS Publication." Federal Information Processing Standards Publications (FIPS PUBS) are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act. Information concerning their availability and applicability should be obtained from the National Technical Information Service (NTIS), 5285 Port Royal Road, Springfield, Virginia 22161. FIPS PUBS include voluntary standards when these are adopted for Federal use. Individual orders for FIPS PUBS should be referred to the NTIS Sales Office, and orders for subscription service should be referred to the NTIS Subscription Officer, both at the above address, or telephone number (703) 487-4650.

13.2 FEDERAL TELECOMMUNICATION STANDARDS (FED-STDS):

Telecommunication products under this Schedule that do not conform to Federal Telecommunication Standards (FED-STDS) should not be acquired unless a waiver has been granted in accordance with the applicable "FED-STD." Federal Telecommunication Standards are issued by the U.S. Department of Commerce, National Institute of Standards and Technology (NIST), pursuant to National Security Act.

Ordering information and information concerning the availability of FED-STDS should be obtained from the GSA, Federal Acquisition Service, Specification Section, 470 East L’Enfant Plaza, Suite 8100, SW, Washington, DC 20407, telephone number (202)619-8925. Please include a self-addressed mailing label when requesting information by mail. Information concerning their applicability can be obtained by writing or calling the U.S. Department of Commerce, National Institute of Standards and Technology, Gaithersburg, MD 20899, telephone number (301)975-2833.

14. CONTRACTOR TASKS / SPECIAL REQUIREMENTS (C-FSS-370) (NOV 2003)

(a) Security Clearances: The Contractor may be required to obtain/possess varying levels of security clearances in the performance of orders issued under this contract. All costs associated with obtaining/possessing such security clearances should be factored into the price offered under the Multiple Award Schedule.

(b) Travel: The Contractor may be required to travel in performance of orders issued under this contract. Allowable travel and per diem charges are governed by Pub .L. 99-234 and FAR Part 31, and are reimbursable by the ordering agency or can be priced as a fixed price item on orders placed under the Multiple Award Schedule. Travel in performance of a task order will only be reimbursable to the extent authorized by the ordering agency. The Industrial Funding Fee does NOT apply to travel and per diem charges.

(c) Certifications, Licenses and Accreditations: As a commercial practice, the Contractor may be required to obtain/possess any variety of certifications, licenses and accreditations for specific FSC/service code classifications offered. All costs associated with obtaining/ possessing such certifications, licenses and accreditations should be factored into the price offered under the Multiple Award Schedule program.

(d) Insurance: As a commercial practice, the Contractor may be required to obtain/possess insurance coverage for specific FSC/service code classifications offered. All costs associated with obtaining/possessing such insurance should be factored into the price offered under the Multiple Award Schedule program.

(e) Personnel: The Contractor may be required to provide key personnel, resumes or skill category descriptions in the performance of orders issued under this contract. Ordering activities may require agency approval of additions or replacements to key personnel.

(f) Organizational Conflicts of Interest: Where there may be an organizational conflict of interest as determined by the ordering agency, the Contractor’s participation in such order may be restricted in accordance with FAR Part 9.5.

(g) Documentation/Standards: The Contractor may be requested to provide products or services in accordance with rules, regulations, OMB orders, standards and documentation as specified by the agency’s order.

(h) Data/Deliverable Requirements: Any required data/deliverables at the ordering level will be as specified or negotiated in the agency’s order.

(i) Government-Furnished Property: As specified by the agency’s order, the Government may provide property, equipment, materials or resources as necessary.

(j) Availability of Funds: Many Government agencies’ operating funds are appropriated for a specific fiscal year. Funds may not be presently available for any orders placed under the contract or any option year. The Government’s obligation on orders placed under this contract is contingent upon the availability of appropriated funds from which payment for ordering purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are available to the ordering Contracting Officer.

(k) Overtime: For professional services, the labor rates in the Schedule should not vary by virtue of the Contractor having worked overtime. For services applicable to the Service Contract Act (as identified in the Schedule), the labor rates in the Schedule will vary as governed by labor laws (usually assessed at time and a half of the labor rate).

15. CONTRACT ADMINISTRATION FOR ORDERING ACTIVITIES:

Any ordering activity, with respect to any one or more delivery orders placed by it under this contract, may exercise the same rights of termination as might the GSA Contracting Officer under provisions of FAR 52.212-4, paragraphs (l) Termination for the ordering activity’s convenience, and (m) Termination for Cause (See 52.212-4)

16. GSA ADVANTAGE!

GSA Advantage! is an on-line, interactive electronic information and ordering system that provides on-line access to vendors' schedule prices with ordering information. GSA Advantage! will allow the user to perform various searches across all contracts including, but not limited to:

(1) Manufacturer;

(2) Manufacturer's Part Number; and

(3) Product categories.

Agencies can browse GSA Advantage! by accessing the Internet World Wide Web utilizing a browser (ex.: NetScape). The Internet address is http://www.fss.gsa.gov/.

17. PURCHASE OF OPEN MARKET ITEMS

NOTE: Open Market Items are also known as incidental items, noncontract items, non-Schedule items, and items not on a Federal Supply Schedule contract. ODCs (Other Direct Costs) are not part of this contract and should be treated as open market purchases. Ordering Activities procuring open market items must follow FAR 8.402(f).

For administrative convenience, an ordering activity contracting officer may add items not on the Federal Supply Multiple Award Schedule (MAS) -- referred to as open market items -- to a Federal Supply Schedule blanket purchase agreement (BPA) or an individual task or delivery order, only if-

(1) All applicable acquisition regulations pertaining to the purchase of the items not on the Federal Supply Schedule have been followed (e.g., publicizing (Part 5), competition requirements (Part 6), acquisition of commercial items (Part 12), contracting methods (Parts 13, 14, and 15), and small business programs (Part 19));

(2) The ordering activity contracting officer has determined the price for the items not on the Federal Supply Schedule is fair and reasonable;

(3) The items are clearly labeled on the order as items not on the Federal Supply Schedule; and http://www.fss.gsa.gov/

(4) All clauses applicable to items not on the Federal Supply Schedule are included in the order.

18. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS

a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:

(1) Time of 1/installation quotations for individual orders;

(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.

(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.

b. The above is not intended to encompass items not currently covered by the GSA Schedule contract.

19. OVERSEAS ACTIVITIES

The terms and conditions of this contract shall apply to all orders for installation, maintenance and repair of equipment in areas listed in the pricelist outside the 48 contiguous states and the District of Columbia, except as indicated below:

None

Upon request of the Contractor, the ordering activity may provide the Contractor with logistics support, as available, in accordance with all applicable ordering activity regulations. Such ordering activity support will be provided on a reimbursable basis, and will only be provided to the Contractor's technical personnel whose services are exclusively required for the fulfillment of the terms and conditions of this contract.

20. BLANKET PURCHASE AGREEMENTS (BPAs)

Federal Acquisition Regulation (FAR) 13.303-1(a) defines Blanket Purchase Agreements (BPAs) as “…a simplified method of filling anticipated repetitive needs for supplies or services by establishing ‘charge accounts’ with qualified sources of supply.” The use of Blanket Purchase Agreements under the Federal Supply Schedule Program is authorized in accordance with FAR 13.303-2(c)(3), which reads, in part, as follows:

“BPAs may be established with Federal Supply Schedule Contractors, if not inconsistent with the terms of the applicable schedule contract.”

Federal Supply Schedule contracts contain BPA provisions to enable schedule users to maximize their administrative and purchasing savings. This feature permits schedule users to set up “accounts” with Schedule Contractors to fill recurring requirements. These accounts establish a period for the BPA and generally address issues such as the frequency of ordering and invoicing, authorized callers, discounts, delivery locations and times. Agencies may qualify for the best quantity/volume discounts available under the contract, based on the potential volume of business that may be generated through such an agreement, regardless of the size of the individual orders. In addition, agencies may be able to secure a discount higher than that available in the contract based on the aggregate volume of the business possible under a BPA. Finally, Contractors may be open to a progressive type of discounting where the discount would increase once the sales accumulated under the BPA reach certain prescribed levels. Use of a BPA may be particularly useful with the new Maximum Order feature.

Following is a Suggested BPA Format for customers to consider when using this purchasing tool.

BEST VALUE

BLANKET PURCHASE AGREEMENT

FEDERAL SUPPLY SCHEDULE

(Insert Customer Name)

In the spirit of the Federal Acquisition Streamlining Act (ordering activity) and (TMC Technologies of West Virginia Corp.) enter into a cooperative agreement to further reduce the administrative costs of acquiring commercial items from the General Services Administration (GSA) Federal Supply Schedule Contract(s)

Federal Supply Schedule contract BPAs eliminate contracting and open market costs such as: search for sources; the development of technical documents, solicitations and the evaluation of offers. Teaming Arrangements are permitted with Federal Supply Schedule Contractors in accordance with Federal Acquisition Regulation (FAR) 9.6.

This BPA will further decrease costs, reduce paperwork, and save time by eliminating the need for repetitive, individual purchases from the schedule contract. The end result is to create a purchasing mechanism for the ordering activity that works better and costs less.

Signatures

Ordering Activity Date TMC Technologies of West Virginia Corp. Date

BPA NUMBER_____________

(CUSTOMER NAME)

BLANKET PURCHASE AGREEMENT

Pursuant to GSA Federal Supply Schedule Contract Number(s)____________, Blanket Purchase Agreements, the Contractor agrees to the following terms of a Blanket Purchase Agreement (BPA) EXCLUSIVELY WITH (ordering activity):

(1) The following contract items can be ordered under this BPA. All orders placed against this BPA are subject to the terms and conditions of the contract, except as noted below:

MODEL NUMBER/PART NUMBER *SPECIAL BPA DISCOUNT/PRICE

(2) Delivery:

DESTINATION DELIVERY SCHEDULES / DATES

(3) The ordering activity estimates, but does not guarantee, that the volume of purchases through this agreement will be _________________________.

(4) This BPA does not obligate any funds.

(5) This BPA expires on _________________ or at the end of the contract period, whichever is earlier.

(6) The following office(s) is hereby authorized to place orders under this BPA:

OFFICE POINT OF CONTACT

(7) Orders will be placed against this BPA via Electronic Data Interchange (EDI), FAX, or paper.

(8) Unless otherwise agreed to, all deliveries under this BPA must be accompanied by delivery tickets or sales slips that must contain the following information as a minimum:

(a) Name of Contractor;

(b) Contract Number;

(c) BPA Number;

(d) Model Number or National Stock Number (NSN);

(e) Purchase Order Number;

(f) Date of Purchase;

(g) Quantity, Unit Price, and Extension of Each Item (unit prices and extensions need not be shown when incompatible with the use of automated systems; provided, that the invoice is itemized to show the information); and

(h) Date of Shipment.

(9) The requirements of a proper invoice are specified in the Federal Supply Schedule contract.

Invoices will be submitted to the address specified within the purchase order transmission issued against this BPA.

(10) The terms and conditions included in this BPA apply to all purchases made pursuant to it. In the event of an inconsistency between the provisions of this BPA and the Contractor’s invoice, the provisions of this BPA will take precedence.

21. CONTRACTOR TEAM ARRANGEMENTS

Contractors participating in contractor team arrangements must abide by all terms and conditions of their respective contracts. This includes compliance with Clauses 552.238-74, Industrial Funding Fee and Sales Reporting, i.e., each contractor (team member) must report sales and remit the IFF for all products and services provided under its individual contract.

22. INSTALLATION, DEINSTALLATION, REINSTALLATION

The Davis-Bacon Act (40 U.S.C. 276a-276a-7) provides that contracts in excess of $2,000 to which the United States or the District of Columbia is a party for construction, alteration, or repair (including painting and decorating) of public buildings or public works with the United States, shall contain a clause that no laborer or mechanic employed directly upon the site of the work shall received less than the prevailing wage rates as determined by the Secretary of Labor. The requirements of the Davis-Bacon Act do not apply if the construction work is incidental to the furnishing of supplies, equipment, or services. For example, the requirements do not apply to simple installation or alteration of a public building or public work that is incidental to furnishing supplies or equipment under a supply contract. However, if the construction, alteration or repair is segregable and exceeds $2,000, then the requirements of the Davis- Bacon Act apply.

The ordering activity issuing the task order against this contract will be responsible for proper administration and enforcement of the Federal labor standards covered by the Davis-Bacon Act. The proper Davis-Bacon wage determination will be issued by the ordering activity at the time a request for quotations is made for applicable construction classified installation, deinstallation, and reinstallation services under SIN 132-8.

23. SECTION 508 COMPLIANCE

If applicable, Section 508 compliance information on the supplies and services in this contract are available in Electronic and Information Technology (EIT) at the following: www.tmctechnologies.com

TMC complies with Section 508 for all software development efforts applicable under this standard.

The EIT standard can be found at: www.Section508.gov/.

24. PRIME CONTRACTOR ORDERING FROM FEDERAL SUPPLY SCHEDULES

Prime Contractors (on cost reimbursement contracts) placing orders under Federal Supply Schedules, on behalf of an ordering activity, shall follow the terms of the applicable schedule and authorization and include with each order:

(a) A copy of the authorization from the ordering activity with whom the contractor has the prime contract (unless a copy was previously furnished to the Federal Supply Schedule contractor); and

(b) The following statement:

This order is placed under written authorization from _______ dated _______. In the event of any inconsistency between the terms and conditions of this order and those of your Federal Supply Schedule contract, the latter will govern.

http://www.section508.gov/

25. INSURANCE—WORK ON A GOVERNMENT INSTALLATION (JAN 1997) (FAR 52.228-5)

(a) The Contractor shall, at its own expense, provide and maintain during the entire performance of this contract, at least the kinds and minimum amounts of insurance required in the Schedule or elsewhere in the contract.

(b) Before commencing work under this contract, the Contractor shall notify the Contracting Officer in writing that the required insurance has been obtained. The policies evidencing required insurance shall contain an endorsement to the effect that any cancellation or any material change adversely affecting the Government's interest shall not be effective:

(1) For such period as the laws of the State in which this contract is to be performed prescribe;

or

(2) Until 30 days after the insurer or the Contractor gives written notice to the Contracting

Officer, whichever period is longer.

(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in subcontracts under this contract that require work on a Government installation and shall require subcontractors to provide and maintain the insurance required in the Schedule or elsewhere in the contract. The Contractor shall maintain a copy of all subcontractors' proofs of required insurance, and shall make copies available to the Contracting Officer upon request.

26. INDUSTRIAL FUNDING FEE

In accordance with the Industrial Funding Fee Clauses GSAR 552.238-74, TMC Technologies of West Virginia Corp. has agreed to pay the IFF in accordance with the Clause 552.238-76 payment of .75%.

27. ADVANCE PAYMENTS

A payment under this contract to provide a service or deliver an article for the United States Government may not be more than the value of the service already provided or the article already delivered. Advance or pre-payment is not authorized or allowed under this contract (31 U.S.C. 3324).

TERMS AND CONDITIONS APPLICABLE TO INFORMATION TECHNOLOGY (IT) PROFESSIONAL

SERVICES SPECIAL ITEM NUMBER (SIN) 132-51

1. SCOPE

a. The prices, terms and conditions stated under Special Item Number 132-51 Information Technology Professional Services apply exclusively to IT Services within the scope of this Information Technology Schedule.

b. The Contractor shall provide services at the Contractor’s facility and/or at the ordering activity location, as agreed to by the Contractor and the ordering activity.

2. PERFORMANCE INCENTIVES

a. Performance incentives may be agreed upon between the Contractor and the ordering activity on individual fixed price orders or Blanket Purchase Agreements under this contract in accordance with this clause.

b. The ordering activity must establish a maximum performance incentive price for these services and/or total solutions on individual orders or Blanket Purchase Agreements.

c. Incentives should be designed to relate results achieved by the contractor to specified targets.

To the maximum extent practicable, ordering activities shall consider establishing incentives where performance is critical to the ordering activity’s mission and incentives are likely to motivate the contractor. Incentives shall be based on objectively measurable tasks.

3. ORDERING PROCEDURES FOR SERVICES (REQUIRING A STATEMENT OF WORK) (G-FCI-

920) (MAR 2003)

FAR 8.402 contemplates that GSA may occasionally find it necessary to establish special ordering procedures for individual Federal Supply Schedules or for some Special Item Numbers (SINs) within a Schedule. GSA has established special ordering procedures for services that require a Statement of Work. These special ordering procedures take precedence over the procedures in FAR 8.404 (b)(2) through (b)(3).

When ordering services over $100,000, Department of Defense (DOD) ordering offices and non-DOD agencies placing orders on behalf of the DOD must follow the policies and procedures in the Defense Federal Acquisition Regulation Supplement (DFARS) 208.404-70 – Additional ordering procedures for services. When DFARS 208.404-70 is applicable and there is a conflict between the ordering procedures contained in this clause and the additional ordering procedures for services in DFARS 208.404-70, the DFARS procedures take precedence.

GSA has determined that the prices for services contained in the contractor’s price list applicable to this Schedule are fair and reasonable. However, the ordering activity using this contract is responsible for considering the level of effort and mix of labor proposed to perform a specific task being ordered and for making a determination that the total firm-fixed price or ceiling price is fair and reasonable.

(a) When ordering services, ordering activities shall—

(1) Prepare a Request (Request for Quote or other communication tool):

(i) A statement of work (a performance-based statement of work is preferred) that outlines, at a minimum, the work to be performed, location of work, period of performance, deliverable schedule, applicable standards, acceptance criteria, and any special requirements (i.e., security clearances, travel, special knowledge, etc.) should be prepared.

(ii) The request should include the statement of work and request the contractors to submit either a firm-fixed price or a ceiling price to provide the services outlined in the statement of work. A firm-fixed price order shall be requested, unless the ordering activity makes a determination that it is not possible at the time of placing the order to estimate accurately the extent or duration of the work or to anticipate cost with any reasonable degree of confidence. When such a determination is made, a labor hour or time-and materials proposal may be requested. The firm-fixed price shall be based on the rates in the schedule contract and shall consider the mix of labor categories and level of effort required to perform the services described in the statement of work. The firm-fixed price of the order should also include any travel costs or other incidental costs related to performance of the services ordered, unless the order provides for reimbursement of travel costs at the rates provided in the Federal Travel or Joint Travel Regulations. A ceiling price must be established for labor-hour and time-and-materials orders.

(iii) The request may ask the contractors, if necessary or appropriate, to submit a project plan for performing the task, and information on the contractor’s experience and/or past performance performing similar tasks.

(iv) The request shall notify the contractors what basis will be used for selecting the contractor to receive the order. The notice shall include the basis for determining whether the contractors are technically qualified and provide an explanation regarding the intended use of any experience and/or past performance information in determining technical qualification of responses. If consideration will be limited to schedule contractors who are small business concerns as permitted by paragraph (2) below, the request shall notify the contractors that will be the case.

(2) Transmit the Request to Contractors:

Based upon an initial evaluation of catalogs and price lists, the ordering activity should identify the contractors that appear to offer the best value (considering the scope of services offered, pricing and other factors such as contractors’ locations, as appropriate) and transmit the request as follows:

NOTE: When buying IT professional services under SIN 132—51 ONLY, the ordering office, at its discretion, may limit consideration to those schedule contractors that are small business concerns. This limitation is not applicable when buying supplies and/or services under other SINs as well as SIN 132-51.

The limitation may only be used when at least three (3) small businesses that appear to offer services that will meet the agency’s needs are available, if the order is estimated to exceed the micro-purchase threshold.

(i) The request should be provided to at least three (3) contractors if the proposed order is estimated to exceed the micro-purchase threshold, but not exceed the maximum order threshold.

(ii) For proposed orders exceeding the maximum order threshold, the request should be provided to additional contractors that offer services that will meet the ordering activity’s needs.

(iii) In addition, the request shall be provided to any contractor who specifically requests a copy of the request for the proposed order.

(iv) Ordering activities should strive to minimize the contractors’ costs associated with responding to requests for quotes for specific orders. Requests should be tailored to the minimum level necessary for adequate evaluation and selection for order placement. Oral presentations should be considered, when possible.

(3) Evaluate Responses and Select the Contractor to Receive the Order:

After responses have been evaluated against the factors identified in the request, the order should be placed with the schedule contractor that represents the best value. (See FAR 8.404)

(b) The establishment of Federal Supply Schedule Blanket Purchase Agreements (BPAs) for recurring services is permitted when the procedures outlined herein are followed. All BPAs for services must define the services that may be ordered under the BPA, along with delivery or performance time frames, billing procedures, etc. The potential volume of orders under BPAs, regardless of the size of individual orders, may offer the ordering activity the opportunity to secure volume discounts. When establishing BPAs, ordering activities shall—

(1) Inform contractors in the request (based on the ordering activity’s requirement) if a single BPA or multiple BPAs will be established, and indicate the basis that will be used for selecting the contractors to be awarded the BPAs.

(i) SINGLE BPA: Generally, a single BPA should be established when the ordering activity can define the tasks to be ordered under the BPA and establish a firm-fixed price or ceiling price for individual tasks or services to be ordered. When this occurs, authorized users may place the order directly under the established BPA when the need for service arises. The schedule contractor that represents the best value should be awarded the BPA. (See FAR 8.404)

(ii) MULTIPLE BPAs: When the ordering activity determines multiple BPAs are needed to meet its requirements, the ordering activity should determine which contractors can meet any technical qualifications before establishing the BPAs. When establishing the BPAs, the procedures in (a)(2) above must be followed. The procedures at (a)(2) do not apply to orders issued under multiple BPAs. Authorized users must transmit the request for quote for an order to all BPA holders and then place the order with the Schedule contractor that represents the best value.

(2) Review BPAs Periodically: Such reviews shall be conducted at least annually. The purpose of the review is to determine whether the BPA still represents the best value. (See FAR 8.404)

(c) The ordering activity should give preference to small business concerns when two or more contractors can provide the services at the same firm-fixed price or ceiling price.

(d) When the ordering activity’s requirement involves both products as well as executive, administrative and/or professional, services, the ordering activity should total the prices for the products and the firm-fixed price for the services and select the contractor that represents the best value. (See FAR 8.404)

(e) The ordering activity, at a minimum, should document orders by identifying the contractor from which the services were purchased, the services purchased, and the amount paid. If other than a firm-fixed price order is placed, such documentation should include the basis for the determination to use a labor-hour or time-and-materials order. For ordering activity requirements in excess of the micro-purchase threshold, the order file should document the evaluation of Schedule contractors’ quotes that formed the basis for the selection of the contractor that received the order and the rationale for any trade-offs made in making the selection.

4. ORDER

a. Agencies may use written orders, EDI orders, blanket purchase agreements, individual purchase orders, or task orders for ordering services under this contract. Blanket Purchase Agreements shall not extend beyond the end of the contract period; all services and delivery shall be made and the contract terms and conditions shall continue in effect until the completion of the order.

Orders for tasks which extend beyond the fiscal year for which funds are available shall include FAR 52.232-19 (Deviation – May 2003) Availability of Funds for the Next Fiscal Year. The purchase order shall specify the availability of funds and the period for which funds are available.

b. All task orders are subject to the terms and conditions of the contract. In the event of conflict between a task order and the contract, the contract will take precedence.

5. PERFORMANCE OF SERVICES

a. TMC Technologies of West Virginia Corp. shall commence performance of services on the date agreed to by the Contractor and the ordering activity.

b. TMC Technologies of West Virginia Corp. agrees to render services only during normal working hours, unless otherwise agreed to by the Contractor and the ordering activity.

c. The ordering activity should include the criteria for satisfactory completion for each task in the Statement of Work or Delivery Order. Services shall be completed in a good and workmanlike manner.

d. Any Contractor travel required in the performance of IT Services must comply with the Federal Travel Regulation or Joint Travel Regulations, as applicable, in effect on the date(s) the travel is performed. Established Federal Government per diem rates will apply to all Contractor travel.

Contractors cannot use GSA city pair contracts.

6. STOP-WORK ORDER (FAR 52.242-15) (AUG 1989)

(a) The Contracting Officer may, at any time, by written order to the Contractor, require the Contractor to stop all, or any part, of the work called for by this contract for a period of 90 days after the order is delivered to the Contractor, and for any further period to which the parties may agree. The order shall be specifically identified as a stop-work order issued under this clause.

Upon receipt of the order, the Contractor shall immediately comply with its terms and take all reasonable steps to minimize the incurrence of costs allocable to the work covered by the order during the period of work stoppage. Within a period of 90 days after a stop-work is delivered to the Contractor, or within any extension of that period to which the parties shall have agreed, the Contracting Officer shall either-

(1) Cancel the stop-work order; or

(2) Terminate the work covered by the order as provided in the Default, or the Termination for

Convenience of the Government, clause of this contract.

(b) If a stop-work order issued under this clause is canceled or the period of the order or any extension thereof expires, the Contractor shall resume work. The Contracting Officer shall make an equitable adjustment in the delivery schedule or contract price, or both, and the contract shall be modified, in writing, accordingly, if-

(1) The stop-work order results in an increase in the time required for, or in the Contractor's cost properly allocable to, the performance of any part of this contract; and

(2) The Contractor asserts its right to the adjustment within 30 days after the end of the period of work stoppage; provided that, if the Contracting Officer decides the facts…