Amendment_01.pdf

1. Contract ID Code Page of Pages

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1 5

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQ. NO. 5. PROJECT NO. (if applicable)

01 June 24, 2016 EQ5P2SS1P-16-5094

6. ISSUED BY 7. ADMINISTERED BY (If other than Item 6)

General Services Administration

AMD, Chicagoland Construction Contracting Team

230 S. Dearborn St., Suite 3600

Chicago, IL 60604

Same as Block 6

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, Country, State and ZIP Code) () 9A. AMENDMENT OF SOLICITATION NO.

GS-05-P-16-GC-C-7002

X 9B. DATED (SEE ITEM 11)

June 1, 2016

10A. MODIFICATION OF CONTRACT/ORDER NO.

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning 1 copy of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (if required)

13. THIS ITEM ONLY APPLIES TO MODIFICATION OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

() A. THIS ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINSTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN

ITEM

14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return ____ copy to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible)

Solicitation #GS-05-P-16-GC-C-7002, Amendment 01

Child Care Center Renovation for Custom House located at 610 S. Canal Street in Chicago, Illinois.

Amendment 01 is issued to 1) extend the due date and time from July 6, 2016 at 4:00PM CDT to July 13, 2016 at 4:00PM CDT, 2) provide a response to the RFI’s received to date, 3) issue Addendum 01, and 4) issue Addendum 02.

CONTINED ON PAGES 2 THROUGH 5

Except as provided herein, all terms and conditions of the document reference in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE

SIGNED

(Signature of person authorized to sign)

(Signature of Contracting Officer)

NSN 7540-01-152-8070

Previous Edition unusable

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT SOLICITATION NO. AMENDMENT NO. PAGE OF PAGES

CONTINUATION OF STANDARD FORM 30

Child Care Center Renovation for Custom House, Chicago, IL

Response to RFI’s

Q1. Referencing Sheets A200, A201 and A202, Details 9/A200 Classroom 170G North Elevation, 5/A200 Classroom 170M

North Elevation, 12/A201 170P North Elevation, 8/A201 170R North Elevation, 1/A201 130 West Elevation, and 9/A202 140 West

Elevation 140 as referenced. Elevation details indicate existing exterior windows to be replaced with safety glass, yet demolition details do not indicate the removal of glass in these areas. Please confirm intent.

Response: Exterior window glazing is to remain. Addendum #02 addresses this error on the drawings.

Q2. Drawings do not provide finish details for Office Rm 170D East and North views. Please confirm if wainscot shall be installed at these elevations.

Response: These are exterior walls with radiators.

Q3. Drawings do not provide finish details for Conf. Rm 170E East and South views. Please confirm if wainscot shall be installed at these elevations.

Response: No wainscot.

Q4. Drawings indicate a Nursing Room located at Column Line 2 just to the north of the main entrance adjacent to Waiting Room

170C. Various sheets identify the Nursing Room at this location differently, there are no elevations evidenced, and it is not identified on the Finish Schedule located on Sheet A102. Please confirm Room Number and provide finish schedule information and elevations for clarity.

Response: Nursing Room is #170Z. Addendum #02 addresses this error on the drawings.

Q5. It appears as if the Nursing Room located at Column Line 2 just to the north of the main entrance adjacent to Waiting Room

170C calls for the installation of SS-1 at the walls, yet all other locations where a sink is evidenced calls for finish T-1 or T-2. Please confirm intent.

Response: Wainscoat per drawings and Addendum #02.

Q6. Wall Type 4B is identified for use in a number of locations throughout the space, and construction is identified in Detail

4/A501. Specifically referencing Detail 1/A400, wall type 4B is identified in a number of locations. Sheet A102 notes many of these same locations are to receive solid surface wainscot material. Wall Type 4B does not evidence the installation of solid surface wainscot; please confirm intent and we will respond accordingly.

Response: Addendum #02 addresses this issue.

Q7. Detail 1/ A201 130 West Elevation does not include the typical keynotes for the radiators, and elevation keynote A.06 indicate solid surface wainscot to be installed over the entirety of the radiators in this elevation. Please clarify intent.

Q8. Specification 064116 references boiler plate AWI quality standard compliance certification information for cabinetry and millwork fabrication and installation. The process is onerous and adds additional cost to pricing submitted, which is above and beyond what is typically expected; the fabricator constructs the cabinets and the carpenter installs the material. Please confirm if

AWI compliance certificates can be disregarded.

Response: Will address this in future Addenda. This will be included as an option.

Q9. Specification Section 123661 does not reference whether or not wainscot shall be seamed together or if control joints are to be installed. Please provide a detail which clarifies intent.

Q10. Specification 123661.1.6A&B specifies the fabricator of the solid surface countertops must be the installer. Please confirm intent as this is not typically the case, adding additional cost for the fabricator to provide services a carpenter would typically address.

Q11. Specifications (specifically 064116) state to apply AWI Quality Certification Program label to Shop Drawings and submit the

Millworker’s AWI Quality Certification Program. AWI and QCP add significant costs to the millwork and limits the amount of millwork vendors. Will the government waive AWI Certification for the project?

Response: Will address this in future Addenda. This will be included as an option.

Q12. For the above mentioned project, will a JV be allowed between a small business and a large business? I am a small business, general contractor based out of Florida and I have completed multiple projects here in the city of Chicago; we will actually be opening an office here soon. I would like the opportunity to bid on this project but due to the magnitude of the project and the size of my business, it will be difficult for us to fund, bond, and fulfill all the requirements unless we do a JV with a large GC. Please advise.

Response: JV of a small business and a large business cannot qualify as “small” due to “affiliation”. There are exceptions to the affiliation rule. One being, a JV between a “Mentor” and a “Protégé” under SBA’s 8(a) Program.

Also, a JV of two or more business concerns may submit an offer as a small business without regard to affiliation so long as each concern is small under NAICS code for the contract, provided:

The procurement qualifies as a “bundled” requirement

The procurement is other than a “bundled” requirement and:

o For a procurement having a receipts-based size standard, the dollar value of the procurement, including options, exceeds half the size standard, or o For a procurement having an employee- based size standard, the dollar value of the procurement, including options, exceeds $10 million.

Q13. Is there a warranty on the existing roof?

Response: This project is on the first floor. Warranty on the roof and a replacement project is being planned for fiscal year 2018.

Q14. Can you please verify who the current controls contractor is in the building and/or what control system is in place?

Response: Johnson Controls.

Q15. Has the renovation area been tested for lead paint, asbestos, mold etc.? If so, please provide copy of the report & GC is not responsible for any testing and abatement.

Response: Yes it has been tested or has a report. The General Contractor is not responsible for any testing and abatement.

Q16. Are construction debris considered CCDD (Clean construction demolition debris) and will owner certify if the need be?

Response: GSA’s interior renovations have met the requirements of this in the past as clean without issue. GSA is not exempt from IEPA’s requirements.

Q17. Please provide height of existing floor to soffit of slab above?

Response: This is noted on the drawings as 13’-6” for floor to bottom of existing structure.

Q18. Existing Partition walls to be demolished, are these going to soffit of slab above or stopping above acoustical ceiling above?

Response: Structure is to slab above.

Q19. Please provide finishes for Room Nos. 130A, 170K, 170L, 170N.

Response: Addressed in Addendum #02.

Q20. Drgs. AD 1.00 and AD 2.00

Elevation 1 and 2 do not match plans.

Response: Addressed in Addendum #02.

Q21. Drgs. AD 1.00 and AD 2.01

Elevations 7,9,10, 11 do not match plans.

Response: Addressed in Addendum #02.

Q22. Drg. A4.00

Detail 1 Wall between Room 170C & 170G – Wall section?

Detail 2 Room 170H- Wall section?

Detail 2 Room 170M- Wall section?

Response: Addressed in Addendum #02.

Q23. The duration of each phase is very short, considering the adjoining areas will be in use-is it being extended?

Response: Contractors should submit a price based on the requirements of the documents including time.

Addendum 01 forms part of the Contract Documents for the above named project and contains the following:

Revised Drawings:

The following Drawings are revised and issued herewith, dated 5/23/2016

G-XXX (cover)

FP-100

FA-101

New Drawings:

The following drawings are issued herewith, dated 5/23/2016

FA-102

Addendum 02 forms part of the Contract Documents for the above named project and contains the following:

Revised Drawings:

The following Drawings are revised and issued herewith, dated 6/22/2016

A-100 Added General Note 15

Added location of detail to Keyed Note 18

A-102 Corrected Nursing Room number to 170Z

Floor finish and wall base Changed in Room 170J - Kitchenette

Nursing Room added to Finish Schedule

Wainscot added to finish schedule

Added Finish Schedule General Note number 9

A-200 Detail 18 (Nursing Room Elevation) added

Keyed Note 38 added

Keyed Note 24 removed from Detail 9

Keyed Note 24 removed from Detail 5

A-201 Keyed Note 24 removed from Detail 12

Keyed Note 24 removed from Detail 8

Keyed Note 24 removed from Detail 1

Keyed Note 5 and Keyed Note 6 added for clarification to Detail 1

A-202 Keyed Note 24 removed from Detail 12

Keyed Note 24 removed from Detail 9

A-400 Keyed Note 38 added to Detail 1 and Detail 2

General Note 14 and 15 added

ADA Knee Protection note added to Detail 5

Elevation Callout added in Detail 1 for Nursing Room North Interior Elevation

Keyed Note 5 and Keyed Note 6 added for clarification to Detail 1

A-500 General Note L added

General Note M added

A-501 Note added to Detail 4

Note added to Detail 2

General Note L added

General Note M added

A-601 Detail 11 - Wainscot Plan Detail added

Revised Specification

The following specification sections are revised and issued herewith, dated 6/22/2016

102800 Bathroom Accessories Under lavatory Guards (P-trap and Supply Covers) and Mirrors Added

123661.16 Solid Surfacing Installer Requirement Removed

PUBLIC BUILDINGS SERVICE

GREAT LAKES REGION

U.S. GENERAL SERVICES ADMINISTRATION

GENERAL

(Cover) TITLE SHEET, DRAWING INDEX

G-000 GENERAL NOTES SYMBOLS AND CODE MATRIX

G-001 ADA COMPLIANCE

G-002 EXITING DIAGRAM

G-003 FIRST FLOOR PHASING PLAN

ARCHITECTURAL

AD-100 FIRST FLOOR DEMOLITION PLAN

AD-101 FIRST FLOOR DEMOLITION REFLECTED CEILING PLAN

AD-200 DEMOLITION ELEVATIONS

AD-201 DEMOLITION ELEVATIONS

AD-202 DEMOLITION ELEVATIONS

A-100 FIRST FLOOR PLAN

A-101 FIRST FLOOR REFLECTED CEILING PLAN

A-102 FIRST FLOOR FINISH PLAN AND FINISH SCHEDULE

A-103 FIRST FLOOR FLOORING PLAN

A-200 INTERIOR ELEVATIONS

A-201 INTERIOR ELEVATIONS

A-202 INTERIOR ELEVATIONS

A-203 CASEWORK ELEVATIONS

A-400 ENLARGED PLANS

A-500 WALL SECTIONS

A-501 PARTITION TYPES

A-600 DOOR SCHEDULE

A-601 DETAILS

MECHANICAL

M-000 MECHANICAL NOTES, SYMBOLS AND ABBREVIATIONS

MD-100 FIRST FLOOR MECHANICAL DEMOLITION PLAN

M-100 FIRST FLOOR MECHANICAL NEW WORK PLAN

ELECTRICAL

E-100 ELECTRICAL SYMBOL LIST AND NOTES

ED-101 FIRST FLOOR ELECTRICAL DEMOLITION PLAN

E-101 FIRST FLOOR ELECTRICAL LIGHTING PLAN

E-102 FIRST FLOOR ELECTRICAL & SECURITY PLAN

E-200 ELECTRICAL SCHEDULES AND DETAILS

E-300 ELECTRICAL SCHEDULES AND DETAILS

PLUMBING

P-000 PLUMBING NOTES, SYMBOLS AND RISERS

PD-100 FIRST FLOOR PLUMBING DEMOLITION PLAN

P-100 FIRST FLOOR PLUMBING NEW WORK PLAN

P-200 PLUMBING RISER DIAGRAMS

FIRE PROTECTION

FP-100 FIRST FLOOR FIRE PROTECTION NEW WORK PLAN

FIRE ALARM

FA-101

FA-102

FIRST FLOOR FA DEMO & NEW PLANS

FIRE ALARM GENERAL NOTES

EXP. 11-30-17

EXP. 11-30-16

F

FIRST FLOOR

FIRE PROTECTION NEW WORK PLAN

FIRST FLOOR PARTIAL FIRE ALARM DEMO PLAN

FIRST FLOOR PARTIAL FIRE ALARM NEW PLAN

GSA Child Care Center for the U.S. Custom House GSA Project No. PJ4EA1326

610 South Canal Street, Chicago, IL Issued for Addendum #2

SENSITIVE BUT UNCLASSIFIED (SBU)

PROPERTY OF THE UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

Do not remove this notice.

Properly destroy documents when no longer needed.

TOILET ACCESSORIES 102800 - 1

06/22/16

SECTION 102800 - TOILET ACCESSORIES

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including Federal Acquisition Regulation

(FAR) and General Services Administration Acquisition Regulation (GSAR) contract clauses, and other Division 01 Specification Sections, apply to this Section.

1.2 SUMMARY

A. Section Includes:

1. Public-use washroom accessories.

2. Underlavatory guards.

1.3 COORDINATION

A. Coordinate accessory locations with other work to prevent interference with clearances required for access by people with disabilities, and for proper installation, adjustment, operation, cleaning, and servicing of accessories.

B. Deliver inserts and anchoring devices set into concrete or masonry as required to prevent delaying the Work.

1.4 ACTION SUBMITTALS

A. Product Data: For each type of product.

1. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes.

2. Include anchoring and mounting requirements, including requirements for cutouts in other work and substrate preparation.

B. Samples: Full size, for each exposed product and for each finish specified.

1. Approved full-size Samples will be returned and may be used in the Work.

FOR OFFICIAL USE ONLY

TOILET ACCESSORIES 102800 - 2

C. Product Schedule: Indicating types, quantities, sizes, and installation locations by room of each accessory required.

1. Identify locations using room designations indicated.

2. Identify accessories using designations indicated.

1.5 INFORMATIONAL SUBMITTALS

A. Sample Warranty: For manufacturer's special warranty.

1.6 CLOSEOUT SUBMITTALS

A. Maintenance Data: For accessories to include in maintenance manuals.

1.7 WARRANTY

A. Manufacturer's Special Warranty for Mirrors: Manufacturer agrees to repair or replace mirrors that fail in materials or workmanship within specified warranty period.

1. Failures include, but are not limited to, visible silver spoilage defects.

2. Warranty Period: 5 years from date of Substantial Completion.

PART 2 - PRODUCTS

2.1 PUBLIC-USE WASHROOM ACCESSORIES

A. Source Limitations: Obtain public-use washroom accessories from single source from single manufacturer.

B. Toilet Tissue (Roll) Dispenser:

1. Basis-of-Design Product: Subject to compliance with requirements, provide B-2888 by

Bobrick Washroom Equipment, Inc.; or a comparable product by one of the following:

a. American Specialties, Inc.

b. Bradley Corporation.

c. GAMCO Specialty Accessories; a division of Bobrick.

2. Description: Roll-in-reserve dispenser with hinged front secured with tumbler lockset.

3. Mounting: Surface mounted.

4. Operation: Noncontrol delivery with theft-resistant spindle.

http://www.specagent.com/Lookup?ulid=11609 http://www.specagent.com/Lookup?uid=123456987949 http://www.specagent.com/Lookup?uid=123456987948 http://www.specagent.com/Lookup?uid=123456987950 http://www.specagent.com/Lookup?uid=123456987952

FOR OFFICIAL USE ONLY

TOILET ACCESSORIES 102800 - 3

5. Capacity: Designed for 127-mm- (5-inch-) diameter tissue rolls.

6. Material and Finish: Stainless steel, No. 4 finish (satin).

C. Paper Towel (Folded) Dispenser:

1. Basis-of-Design Product: Subject to compliance with requirements, provide B-262 by

Bobrick Washroom Equipment, Inc.; or a comparable product by one of the following:

a. American Specialties, Inc.

b. Bradley Corporation.

c. GAMCO Specialty Accessories; a division of Bobrick.

2. Mounting: Surface mounted.

3. Minimum Capacity: 400 C-fold or 525 multifold towels.

4. Material and Finish: Stainless steel, No. 4 finish (satin).

5. Lockset: Tumbler type.

6. Refill Indicator: Pierced slots at sides or front.

D. Automatic Liquid-Soap Dispenser:

1. Basis-of-Design Product: Subject to compliance with requirements, provide TC

AutoFoam by Technical Concepts; or a comparable product approved by Architect.

2. Description Automatic dispenser with infrared sensor to detect presence of hands; battery powered; designed for dispensing soap in lather form.

3. Mounting: Vertically oriented, surface mounted.

4. Capacity: 1100 ml pouch.

5. Finish: As selected by Architect from manufacturer’s full range.

6. Low Battery Indicator: LED indicator.

7. Lockset: Tumbler type.

8. Refill Indicator: Window type.

E. Mirror Unit:

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. American Specialties, Inc.

b. Bobrick Washroom Equipment, Inc.

c. Bradley Corporation.

d. GAMCO Specialty Accessories; a division of Bobrick.

2. Frame: Stainless-steel angle, 0.05 inch thick or Stainless-steel channel.

a. Corners: Mitered and mechanically interlocked.

http://www.specagent.com/Lookup?ulid=11609 http://www.specagent.com/Lookup?uid=123456987949 http://www.specagent.com/Lookup?uid=123456987948 http://www.specagent.com/Lookup?uid=123456987950 http://www.specagent.com/Lookup?uid=123456987952 http://www.specagent.com/Lookup?ulid=11609 http://www.specagent.com/Lookup?ulid=11609 http://www.specagent.com/Lookup?uid=123456987948 http://www.specagent.com/Lookup?uid=123456987949 http://www.specagent.com/Lookup?uid=123456987950 http://www.specagent.com/Lookup?uid=123456987952

FOR OFFICIAL USE ONLY

TOILET ACCESSORIES 102800 - 4

3. Hangers: Produce rigid, tamper- and theft-resistant installation, using method indicated below.

a. One-piece, galvanized-steel, wall-hanger device with spring-action locking mechanism to hold mirror unit in position with no exposed screws or bolts.

b. Wall bracket of galvanized steel, equipped with concealed locking devices requiring a special tool to remove.

4. Size: 18 by 36 inches.

2.2 UNDERLAVATORY GUARDS

A. Underlavatory Guard:

1. Manufacturers: Subject to compliance with requirements, provide products by one of the following:

a. Plumberex Specialty Products, Inc.

b. Truebro by IPS Corporation.

2. Description: Insulating pipe covering for supply and drain piping assemblies that prevents direct contact with and burns from piping; allow service access without removing coverings.

3. Material and Finish: Antimicrobial, molded plastic, white.

2.3 MATERIALS

A. Stainless Steel: ASTM A 666, Type 304, 0.8-mm (0.031-inch) minimum nominal thickness unless otherwise indicated.

B. Brass: ASTM B 19, flat products; ASTM B 16/B 16M, rods, shapes, forgings, and flat products with finished edges; or ASTM B 30, castings.

C. Steel Sheet: ASTM A 1008/A 1008M, Designation CS (cold rolled, commercial steel), 0.9-mm

(0.036-inch) minimum nominal thickness.

D. Galvanized-Steel Sheet: ASTM A 653/A 653M, with Z180 (G60) hot-dip zinc coating.

E. Galvanized-Steel Mounting Devices: ASTM A 153/A 153M, hot-dip galvanized after fabrication.

F. Fasteners: Screws, bolts, and other devices of same material as accessory unit and tamper-and-theft resistant where exposed, and of galvanized steel where concealed.

http://www.specagent.com/Lookup?ulid=11662 http://www.specagent.com/Lookup?uid=123456988748 http://www.specagent.com/Lookup?uid=123456988749

FOR OFFICIAL USE ONLY

TOILET ACCESSORIES 102800 - 5

G. Chrome Plating: ASTM B 456, Service Condition Number SC 2 (moderate service).

H. Mirrors: ASTM C 1503, Mirror Glazing Quality, clear-glass mirrors, nominal 6.0 mm thick.

2.4 FABRICATION

A. General: Fabricate units with tight seams and joints, and exposed edges rolled. Hang doors and access panels with full-length, continuous hinges. Equip units for concealed anchorage and with corrosion-resistant backing plates.

B. Keys: Provide universal keys for internal access to accessories for servicing and resupplying.

Provide minimum of six keys to Owner's representative.

PART 3 - EXECUTION

3.1 INSTALLATION

A. Install accessories according to manufacturers' written instructions, using fasteners appropriate to substrate indicated and recommended by unit manufacturer. Install units level, plumb, and firmly anchored in locations and at heights indicated.

3.2 ADJUSTING AND CLEANING

A. Adjust accessories for unencumbered, smooth operation. Replace damaged or defective items.

B. Remove temporary labels and protective coatings.

C. Clean and polish exposed surfaces according to manufacturer's written instructions.

END OF SECTION 102800

GSA Child Care Center for the U.S. Custom House

610 South Canal Street, Chicago, IL

GSA Project No. PJ4EA1326

Issued for Addendum #2

SENSITIVE BUT UNCLASSIFIED (SBU)

PROPERTY OF THE UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

Do not remove this notice.

Properly destroy documents when no longer needed.

SOLID SURFACING COUNTERTOPS AND WAINSCOTS 123661.16 - 1

06/22/16

SECTION 123661.16 - SOLID SURFACING COUNTERTOPS AND WAINSCOTS

PART 1 - GENERAL

1.1 RELATED DOCUMENTS

A. Drawings and general provisions of the Contract, including Federal Acquisition Regulation

(FAR) and General Services Administration Acquisition Regulation (GSAR) contract clauses, and other Division 01 Specification Sections, apply to this Section.

1.2 SUMMARY

A. Section Includes:

1. Solid surface material countertops.

2. Solid surface material backsplashes.

3. Solid surface material end splashes.

4. Solid surface material wainscots.

1.3 ACTION SUBMITTALS

A. Product Data: For countertop materials.

B. Shop Drawings: For countertops. Show materials, finishes, edge and backsplash profiles, methods of joining, and cutouts for plumbing fixtures.

1. Show locations and details of joints.

C. Samples for Verification: For the following products:

1. Countertop material, 150 mm (6 inches) square.

2. One full-size solid surface material countertop, with front edge and backsplash, 200 by

250 mm (8 by 10 inches), of construction and in configuration specified.

1.4 INFORMATIONAL SUBMITTALS

A. Qualification Data: For fabricator.

1.5 CLOSEOUT SUBMITTALS

A. Maintenance Data: For solid surface material countertops to include in maintenance manuals.

Include Product Data for care products used or recommended by Installer and names, addresses, and telephone numbers of local sources for products.

GSA Project No. PJ4EA1326 Issued for Addendum #2

SENSITIVE BUT UNCLASSIFIED (SBU)

PROPERTY OF THE UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

Do not remove this notice.

Properly destroy documents when no longer needed.

SOLID SURFACING COUNTERTOPS AND WAINSCOTS 123661.16 - 2

06/22/16

1.6 QUALITY ASSURANCE

A. Fabricator Qualifications: Shop that employs skilled workers who custom-fabricate countertops similar to that required for this Project, and whose products have a record of successful in-service performance.

B. Installer Qualifications: Fabricator of countertops.

C. Mockups: Build mockups to demonstrate aesthetic effects and to set quality standards for fabrication and execution.

1. Build mockup of typical countertop as shown on Drawings.

2. Subject to compliance with requirements, approved mockups may become part of the completed Work if undisturbed at time of Substantial Completion.

1.7 FIELD CONDITIONS

A. Field Measurements: Verify dimensions of countertops by field measurements after base cabinets are installed but before countertop fabrication is complete.

1.8 COORDINATION

A. Coordinate locations of utilities that will penetrate countertops or backsplashes.

PART 2 - PRODUCTS

2.1 SOLID SURFACE MATERIALS

A. Solid Surface Material: Homogeneous-filled plastic resin complying with ICPA SS-1.

1. Basis-of-Design Product: Subject to compliance with requirements, provide products by as indicated on Drawings:

2. Type: Provide Standard type unless Special Purpose type is indicated.

3. Colors and Patterns: As indicated by manufacturer's designations.

2.2 FABRICATION

A. Fabricate countertops and wainscots according to solid surface material manufacturer's written instructions and to the AWI/AWMAC/WI's "Architectural Woodwork Standards."

1. Grade: Custom.

B. Configuration:

1. Front: Straight, slightly eased at top.

2. Backsplash: Straight, slightly eased at corner.

http://www.specagent.com/Lookup?ulid=12336 http://www.specagent.com/Lookup?uid=123457025562 TAvery Line

GSA Project No. PJ4EA1326 Issued for Addendum #2

SENSITIVE BUT UNCLASSIFIED (SBU)

PROPERTY OF THE UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

Do not remove this notice.

Properly destroy documents when no longer needed.

SOLID SURFACING COUNTERTOPS AND WAINSCOTS 123661.16 - 3

06/22/16

3. End Splash: Matching backsplash.

C. Countertops: 12.7-mm- (1/2-inch-) thick, solid surface material with front edge built up with same material.

D. Wainscots: 6.4-mm- (1/4-inch-) thick, solid surface material with front edge built up with same material.

E. Fabricate tops with shop-applied edges unless otherwise indicated. Comply with solid surface material manufacturer's written instructions for adhesives, sealers, fabrication, and finishing.

1. Fabricate with loose backsplashes for field assembly.

F. Joints: Fabricate countertops in sections for joining in field, with joints at locations indicated.

1. Joint Locations: Not within 450 mm (18 inches) of a sink or cooktop and not where a countertop section less than 900 mm (36 inches) long would result, unless unavoidable.

2. Splined Joints: Accurately cut kerfs in edges at joints for insertion of metal splines to maintain alignment of surfaces at joints[ where indicated]. Make width of cuts slightly more than thickness of splines to provide snug fit.[ Provide at least three splines in each joint.]

G. Cutouts and Holes:

1. Undercounter Plumbing Fixtures: Make cutouts for fixtures[ in shop] using template or pattern furnished by fixture manufacturer. Form cutouts to smooth, even curves.

a. Provide vertical edges, slightly eased at juncture of cutout edges with top and bottom surfaces of countertop and projecting 5 mm (3/16 inch) into fixture opening.

2. Counter-Mounted Plumbing Fixtures: Prepare countertops in shop for field cutting openings for counter-mounted fixtures. Mark tops for cutouts and drill holes at corners of cutout locations. Make corner holes of largest radius practical.

3. Fittings: Drill countertops in shop for plumbing fittings, undercounter soap dispensers, and similar items.

4. Counter-Mounted Cooktops: Prepare countertops in shop for field cutting openings for cooktops. Mark tops for cutouts and drill holes at corners of cutout locations. Make corner holes of largest radius practical.

2.3 INSTALLATION MATERIALS

A. Adhesive: Product recommended by solid surface material manufacturer.

B. Sealant for Countertops: Comply with applicable requirements in Section 079200 "Joint

Sealants."

GSA Project No. PJ4EA1326 Issued for Addendum #2

SENSITIVE BUT UNCLASSIFIED (SBU)

PROPERTY OF THE UNITED STATES GOVERNMENT

FOR OFFICIAL USE ONLY

Do not remove this notice.

Properly destroy documents when no longer needed.

SOLID SURFACING COUNTERTOPS AND WAINSCOTS 123661.16 - 4

06/22/16

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine substrates to receive solid surface material countertops and conditions under which countertops will be installed, with Installer present, for compliance with requirements for installation tolerances and other conditions affecting performance of countertops.

B. Proceed with installation only after unsatisfactory conditions have been corrected.

3.2 INSTALLATION

A. Install countertops level to a tolerance of 3 mm in 2.4 m (1/8 inch in 8 feet), 6 mm (1/4 inch) maximum. Do not exceed 0.4-mm (1/64-inch) difference between planes of adjacent units.

B. Fasten countertops by screwing through corner blocks of base units into underside of countertop. Predrill holes for screws as recommended by manufacturer. Align adjacent surfaces and, using adhesive in color to match countertop, form seams to comply with manufacturer's written instructions. Carefully dress joints smooth, remove surface scratches, and clean entire surface.

C. Bond joints with adhesive and draw tight as countertops are set. Mask areas of countertops adjacent to joints to prevent adhesive smears.

1. Install metal splines in kerfs in countertop edges at joints. Fill kerfs with adhesive before inserting splines and remove excess immediately after adjoining units are drawn into position.

2. Clamp units to temporary bracing, supports, or each other to ensure that countertops are properly aligned and joints are of specified width.

D. Install backsplashes and end splashes by adhering to wall and countertops with adhesive. Mask areas of countertops and splashes adjacent to joints to prevent adhesive smears.

E. Complete cutouts not finished in shop. Mask areas of countertops adjacent to cutouts to prevent damage while cutting. Make cutouts to accurately fit items to be installed, and at right angles to finished surfaces unless beveling is required for clearance. Ease edges slightly to prevent snipping.

F. Apply sealant to gaps at walls; comply with Section 079200 "Joint Sealants."

END OF SECTION 123661.16

N.I.C.

D

W

F

F

FIRST FLOOR PLAN

W

F

F

FIRST FLOOR FINISH PLAN

FINISH LEGEND

DESIGNATION MATERIAL PRODUCT NAME SIZE FINISH COLOR

ACT-1 ACOUSTICAL CEILING TILE ARMSTRONG OPTIMA 2' X 2' WHITE

FL-1 LINOLEUM SHEET FLOORING ARMSTRONG LINOART ; RHYTHMICS SNOW STORM LS603

SNOW STORM

FL-2 LINOLEUM SHEET FLOORING ARMSTRONG LINOART ; RHYTHMICS CHROME ALLOY LS601

CHROME ALLOY

FL-3 LINOLEUM SHEET FLOORING ARMSTRONG LINOART ; RHYTHMICS COSMOS LS609

COSMOS

FL-4 LINOLEUM SHEET FLOORING ARMSTRONG LINOART ; RHYTHMICS ROLLING HILLS LS610

ROLLING HILLS

FL-5 RUBBER CORK TILE

JOHNSONITE ECO-SHELL WITH CORK; HRTEC-DP9

RUDDY

FL-6 RUBBER CORK TILE

JOHNSONITE ECO-SHELL WITH CORK; HRTEC-DJ2

ASHEN CG

FL-7 RUBBER CORK TILE

JOHNSONITE ECO-SHELL WITH CORK; HRTEC-DN5

PACIFIC STORM

PL-1 PLASTIC LAMINATE WILSONART STD LAMINATE; 7850-60 BEIGEWOOD VELVET TEXTURE BEIGEWOOD SS-1 SOLID SURFACE LG HiMacs; M308 HAZE M308 HAZE

PT-1 CEILING PAINT BENJAMIN MOORE - SEE SPEC FOR TYPE 2124-70 DISTANT GRAY

PT-2 PAINT BENJAMIN MOORE - SEE SPEC FOR TYPE HC-172 REVERE PEWTER

PT-3 PAINT BENJAMIN MOORE - SEE SPEC FOR TYPE 494 LEWIVILLE GREEN

PT-4 PAINT BENJAMIN MOORE - SEE SPEC FOR TYPE 493 HARBOUR TOWN

PT-5 PAINT BENJAMIN MOORE - SEE SPEC FOR TYPE 710 KENSINGTON GREEN

PT-6 PAINT BENJAMIN MOORE - SEE SPEC FOR TYPE 709 HEAVENLY BLUE

PT-7 RADIATOR COVERS BENJAMIN MOORE - SEE SPEC FOR TYPE 1471 SHORELINE

PT-8 DOOR TRIM BENJAMIN MOORE - SEE SPEC FOR TYPE 1471 SHORELINE

T-1 CERAMIC FLOOR TILE DALTILE; PLAZA NOVA 12" X 24" GRAY FOG PN98

T-2 CERAMIC WALL TILE DALTILE; RITTENHOUSE SQUARE 3" X 6" MATTE ARCTIC WHITE

T-3 CERAMIC WALL TILE DALTILE; RITTENHOUSE SQUARE 3" X 6" MATTE ARCHITECTURAL GRAY

WB-1 WALLBASE JOHNSONITE TRADITIONAL WALL BASE 4"

TB3 DOVER CG

GT-1 TILE GROUT MAPEI; EPOXY GROUT ALABASTER 01

C U

S T

O M

H O

U S

E

C

H I L

D C

A R

E

R

E N

O V

A T

I O

N

ROOM NO. ROOM NAME FLOOR BASE WAINSCOT

WALL DOORS CEILING

REMARKS

N E S W

RADIAT

OR

COVERS

CLASSROOM

ENTRY DOOR

(FROM HALLWAY)

MISC.

DOORS

DOOR

TRIM

MATERIAL FINISH

130 KINDERGARTEN CLASSROOM FL-1 WB-1 SS-1 PT-2 PT-6 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

130b/130c CHILDREN'S TOILET T-1 T-1 - T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 PT-7 - PT-2 PT-9 GYP-X PT-1

140 INDOOR PLAY RM FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 PT-5 PT-2 PT-9 ACT-1 WHITE GENERAL NOTE 2

170 F CORRIDOR FL-1 / 2 / 3 / 4 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE GENERAL NOTE 2

170 R CLASSROOM FL-1 WB-1 SS-1 PT-2 PT-2 PT-4 PT-2 PT-7 PT-3 PT-2 PT-9 ACT-1 WHITE

170 RA CHILDREN'S TOILET T-1 T-1 - T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 P CLASSROOM FL-1 WB-1 SS-1 PT-2 PT-2 PT-4 PT-2 PT-7 PT-3 PT-2 PT-9 ACT-1 WHITE

170 PA CHILDREN'S TOILET T-1 T-1 - T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 M (EAST SIDE)

INFANT ROOM FL-1 WB-1 SS-1 PT-2 PT-2 PT-6 PT-6 PT-7 PT-5 PT-2 PT-9 ACT-1 WHITE

170 M (WEST SIDE)

CLASSROOM FL-1 WB-1 SS-1 PT-2 PT-6 PT-6 PT-2 PT-7 PT-5 PT-2 PT-9 ACT-1 WHITE

170 MA INFANT CHANGING FL-1 WB-1 SS-1 PT-6 PT-6 PT-6 PT-6 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 MC INFANT FOOD PREP T-1 T-1 SS-1 PT-6 PT-6 PT-6 PT-6 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 MB TODDLER TOILET T-1 T-1 - T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 G CLASSROOM FL-1 WB-1 SS-1 PT-2 PT-4 PT-4 PT-2 PT-7 PT-3 PT-2 PT-9 ACT-1 WHITE

170 GA TODDLER TOILET T- 1 T-1 - T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 H STAFF TOILET T-1 T-1 - T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 T-2/T-3/PT-2 PT-7 - PT-2 PT-9 GYP-X WHITE

170 L LAUNDRY FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 K STORAGE FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 C RECEPTION FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 J KITCHENETTE FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 Z NURSING ROOM FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 - - PT-2 PT-9 ACT-1 WHITE

170 D OFFICE FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

170 E CONFERENCE FL-1 WB-1 SS-1 PT-2 PT-2 PT-2 PT-2 PT-7 - PT-2 PT-9 ACT-1 WHITE

GENERAL NOTES:

1. PAINT ALL DOOR SIDES. ENSURE THAT FINISH DOES NOT SCRATCH WITH OPEN/CLOSING OF DOOR. ENSURE DOOR DOES NOT JAM OR STICK.

2. REFERENCE FLOOR FINISH PLAN FLOORING PATTERN

3. REFERENCE ELEVATIONS FOR FINISH LOCATIONS AND PATTERN

4. INFORM AOR OF ANY DISCREPENCIES

5. PAINT ALL SIDES OF COLUMN

6. PAINT RADIATOR COVERS PT-7

7. PAINT DOOR TRIM PT-9. EXCEPT DAYCARE ENTRY DOORS; SEE GENERAL NOTE 8.

8. DOOR SIDES AND DOOR TRIM THAT FACE OUTSIDE OF THE DAYCARE ARE TO BE PAINTED TO MATCH STANDARD BUILDING COLORS.

9. SOLID SURFACE WAINSCOT TO BE APPLIED TO ALL WALL SURFACES, TURN CORNERS, WRAP COLUMNS, ETC. SEE DETAIL 11/A-601

CLASSROOM 170G

NORTH ELEVATION

CLASSROOM 170G

EAST ELEVATION

CLASSROOM 170G

SOUTH ELEVATION

170G

WEST ELEVATION

CLASSROOM 170M

EAST ELEVATION

CLASSROOM 170M

SOUTH ELEVATION

CLASSROOM 170M

WEST ELEVATION

CLASSROOM 170M

NORTH ELEVATION

CLASSROOM 170M

BACK WALL EAST ELEVATION

170MB

NORTH ELEVATION

170MB

EAST ELEVATION

170MB

SOUTH ELEVATION

170MB

WEST ELEVATION

NORTH ELEV

EAST ELEV

SOUTH ELEV

WEST ELEV

170Z - NURSING ROOM

NORTH ELEVATION

170P

NORTH ELEVATION

NORTH ELEVATION

170P

WEST ELEVATION

170P

EAST ELEVATION

170P

SOUTH ELEVATION

EAST ELEVATION

SOUTH ELEVATION

WEST ELEVATION

170R

NORTH ELEVATION

170R

WEST ELEVATION

170R

EAST ELEVATION

170R

SOUTH ELEVATION

CORRIDOR

NORTH ELEVATION

CORRIDOR 2

NORTH ELEVATION

CORRIDOR

EAST ELEVATION

CORRIDOR 2

EAST ELEVATION

CORRIDOR

SOUTH ELEVATION

CORRIDOR 2

WEST ELEVATION

CORRIDOR

WEST ELEVATION

CORRIDOR 2

SOUTH ELEVATION

WEST ELEVATION

NORTH ELEVATION

SOUTH ELEVATION

EAST ELEVATION

W

F

ENLARGED PLAN

KINDERGARDEN TOILET ROOMS

ENLARGED PLAN

TODDLER TOILET ROOMS

ENLARGED PLAN

INFANT SUPPORT AREA, TODDLER RM ENTRY & TOILET

ENLARGED PLAN

ENTRY/OFFICE AREA

BATHROOM ACCESSORIES

TYPICAL PLAN DETAIL

TYPICAL CEILING DETAIL

@ EXISTING EXTERIOR WINDOW

CLASSROOM - CLASSROOM PARTITION

TYPICAL WALL SECTION

CLASSROOM - OFFICE/HALLWAY PARTITION

TYPICAL WALL SECTION

4' LOW WALL PARTITION

TYPICAL WALL SECTION

CHILD HIEGHT ART SINK

MILLWORK SECTION

ADULT HEIGHT ART SINK

MILLWORK SECTION

TYPICAL STORAGE CABINET

MILLWORK SECTION

KITCHENETTE SINK

MILLWORK SECTION

KICHENETTE STORAGE

MILLWORK SECTION

TYPICAL COUNTER TOP

DETAIL

TYPICAL COUNTER TOP AT INTERIOR GLAZING

DETAIL

RECEPTION DESK

DETAIL

L2 - ZERO PEDANT LIGHTS

SUPPORT DETAIL

L2-ZERO - SIZE, COLOR, AND LOCATION

PENDANT LIGHT DETAIL

WAINSCOT

PLAN DETAIL