FINAL COMBINED SYNOPSIS SOLICITATION N3220522Q0138 USNS WASHINGTON CHAMBERS MHE.pdf

MILITARY SEALIFT COMMAND

N10 - CONTRACTS AND BUSINESS MANAGEMENT DIRECTORATE

COMBINED SYNOPSIS/SOLICITATION

Military Sealift Command Combined Synopsis and Solicitation Notice Information

1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued.

2. Solicitation number is N3220522Q0138 and is being issued as a Request for Quotes (RFQ).

3. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2022-04 / 01-30-2022 located on https://www.acquisition.gov

4. The associated NAICS code is 811310, Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance and the associated PSC code is J039, Maintenance/ Repair/ Rebuild of Equipment - Materials for this procurement: NOTE: A Class Waiver is not applicable to a procurement unless the NAICS code, PSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured.

_X_ is not being set-aside for small businesses.

____ is being set-aside for Small Business.

5. The table below lists the Contract Line Item Number(s) (CLIN(s)) and items, quantities and units of measure, inclusive of any applicable options:

SERVICES

CLIN DESCRIPTION QUANTITY UNIT OF

MEASURE

0001 Inspect, service, repair, weight test and certify twenty-four (24) Hyster forklifts, two (2) Hubtex forklifts, eight (8) Wesley pallet jacks and one (1) Genie articulating boom lift in accordance with the statement of work below. Service will include labor, travel and material.

1 Activity Unit

6. Statement of Work (SOW)

Reference(s): (a) NAVSEA SW0-23-AH-WHM-10 Eight Revision, Handling Ammunition and Explosives with industrial Material Handling Equipment (MHE) (b). NAVSUP Publication 538 Sixth Revision, Management of Material Handling Equipment (MHE) and Shipboard Mobile Support Equipment (SMSE)

Attachments: (1). CDRL 0001 - Final Inspection Condition Report (2). CDRL 0002 - Fork Maintenance Report (3). CDRL 0003 - MHE Safety Certification (4). Aerial Work Platform Certification Form

1. Purpose: In accordance with References (a) through (b), Contractor shall provide Maintenance Handling Equipment (MHE) Safety Recertification services in support of the subject activity/vessel. As such, the following information and requirements are hereby provided for planning purposes.

2. Activity/Vessel: USNS WASHINGTON CHAMBERS (T-AKE 11)

3. Location of Equipment/Services: Mare Island Naval Shipyard,Vallejo, CA 94592

4. Period of Performance (POP): 14 MAR 2022 – 28 APR 2022

5. SOR: 1300978527

6. Specific Tasks: The following work items shall be accomplished by the selected service provider (contractor) in conjunction with this service and certification requirement. The Government intends to award a Firm Fixed Price Contract to the selected service provider. The Contractor shall provide all labor, tools, equipment, materials, and vehicles required to accomplish the following:

A. Services to MHE identified in Table 1 below shall be performed ashore (or on board USNS WASHINGTON CHAMBERS) at the customer activity location. The Contractor’s quote shall specify the proposed location of the service and provide a summary of the proposed process for transportation, training, maintenance, repairs, and safety recertification.

B. Contractor shall perform all related inspections, of MHE / Battery Chargers identified in Table 1 in accordance with the requirements set forth in references (a) and (b), attachments 1 thru 3 and appropriate vehicle technical manuals.

C. Scope of Diesel Forklift Repair work includes:

1. PERFORM DIAGNOSTICS

Perform diagnostic service utilizing dashboard display, and – when required - HYSTER approved and authorized Off-Board Laptop Diagnostic Troubleshooting Software, hardware, and diagnostic procedures. Make sure speed is set at 5MPH

2. PERFORM VISUAL INSPECTION

Perform a complete inspection of the vehicle to include, but not be limited to, the following:

a. Fluid Leaks

b. Carriage, including Rollers and Slider Blocks

c. Forks and Locks

d. Mast Chains, Retainers, and Anchors

e. Tire Condition

f. Steering Components

g. Overhead Guard

h. Improper Modifications

i. Seat Condition and Belts

j. Attachments, including Towing Devices

3. PERFORM OPERATIONAL INSPECTION

a. Safety Devices

b. Neutral Starting Switch

c. Instruments/Horn/Lights

d. Brakes, Pedals, and Linkages

e. Forward and Reverse Vehicle Operation

f. Parking Brake

g. Inching Control

h. Shift Levers

i. Steering

j. Exhaust Smoke

k. Mast Operation

l. Tilt Cylinder Operation

m. All Attachments

n. Backup Alarms

4. CLEAN VEHICLE AND COMPONENTS

a. All Painted Areas

b. Radiator and Engine Compartment

c. Steer and Drive Axle

d. Mast

e. Under Floor Plate

f. Control Panel Area

g. Operator Area

h. Battery Tray

5. INSPECT ELECTRICAL SYSTEMS

a. Panel Power Connections

b. Check Seat Switch

c. Check Wire Connections and Condition

d. Check Distributor Cap and Rotor (if equipped)

e. Clean Battery Cable and Connections

f. Other Electrical Components, as Installed

g. Perform Repairs, as required

6. INSPECT HYDRAULIC SYSTEMS

a. All Hydraulic Lines, Hoses, and Fittings

b. Mast and Hose Reel

c. Lift, Tilt, and Shift Cylinders

d. Hydraulic Tank and Breather

e. Hydraulic Pumps

f. Attachment Links

g. Attachment Cylinders

h. Control Valve Operation and Leaks

i. Other Hydraulic Systems, as installed

j. Perform Repairs, as required

7. LUBRICATE VEHICLE

a. Clutch Pedal

b. Accelerator Pedal

c. Drive Line U-Joints

d. Steer Axle

e. Steering Mechanisms

f. Mast, Chains, Rollers, Carriage Attachments

g. Brakes and Parking Brake Linkages

h. Accelerator Pedal

i. Direction Pedal

j. Lift and Tilt Control Hinges

k. Other Lubrication Points, as installed

8. INSPECT FUEL SYSTEM

a. Check for Leaks

b. Check Fuel Lock-Off Regulators and Drain

c. Clean Water Trap

d. Perform Repairs, as Required

9. PERFORM ADDITIONAL MAINTENANCE ACTIONS

a. Verify Stencils/Markings Per NAVSUP P-538 and Re-Stencil/Re-Mark as needed, marking should include SWL both sides, VW both sides (and in view of operator on mast assembly), all operator controls, Manufacture name plate, Accredited laboratory UL, MHE safety Certification and EE on three sides

b. Check for Error Codes and Perform Non-Major Repairs, as required, to Clear Code

c. Check Mast Mounting Trunnions and Re-Torque Bolts, as Needed

d. Repack Leaking Lift, Tilt and Shift Cylinders

e. Adjust Load Chains and Cylinder Rods

f. Complete Electrical Tune-up (plus wires, rotors, etc., as equipped)

g. Check/Adjust Belts Condition and Tension; Replace as Required

h. Check Engine Compression

i. Check and Adjust Ignition Timing (as equipped)

j. Check and Adjust High and Low Engine RPMs

k. Adjust Engine Valves and Replace Valve Cover Gasket (as equipped)

l. Clean & Check PCV Valve (as Equipped); Replace as Needed

m. Check/Clean Induction System

n. Clean Filter Canister, Pre Cleaner

o. Check Radiator Hoses; Replace as Required

p. Change Air Cleaner

q. Change Final Fuel Filter (as equipped) Date filter

r. Change Engine Oil and Filter Date filter

s. Change Transmission Oil and Filter Date filter

t. Change Hydraulic Oil and Filters

u. Change All Differential, Speed Reducer, and Final Drive Lubricants

v. Drain, Flush, and Change Coolant

w. Adjust Hydraulic Pressure, as required

x. Inspect lights, Backup Alarm, and Associated Wiring; Repair/Replace, as required

y. Remove Steer and Drive (Load) Wheels; inspect and Repack all four (4) Bearings

z. Check Brakes, Wheel Cylinders, and Associated Hardware; Adjust/Repair as required

aa. Re-Torque Drive and Steer Wheel Nuts

bb. Evacuate Brake System; Replace Fluid with DOT 3 Brake Fluid, or Per Tech Manual

cc. Adjust Parking Brake and Linkage; Repair as required

dd. Adjust Steering Linkage; Repair as required

ee. Raise Rear of Vehicle and Manually Test Rear Brake Operation (with brake pedal pressed).

ff. Re-Adjust all Brakes, as required

gg. Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques.

hh. Submit Condition Found Report (CFR) and Quote for Required Major Repairs

D. Scope of Electric forklift Repair work includes

1. PERFORM DIAGNOSTICS

Perform diagnostic service utilizing dashboard display, and – when required - Hyster approved and authorized Off-Board Laptop Diagnostic Troubleshooting Software, hardware, and diagnostic procedures.

Make sure speed is set at 5MPH

2. PERFORM VISUAL INSPECTION

a. Perform a complete inspection of the vehicle to include, but not be limited to, the following:

b. Fluid Leaks

c. Carriage, including Rollers and Slider Blocks

d. Forks and Locks

e. Mast Chains, Retainers, and Anchors

f. Tire Condition

g. Steering Components

h. Overhead Guard

i. Improper Modifications

j. Seat Condition and Belts

k. Attachments, including Towing Devices

3. PERFORM OPERATIONAL INSPECTION

a. Safety Devices

b. Neutral Starting Switch

c. Instruments/Horn/Lights

d. Brakes, Pedals, and Linkages

e. Forward and Reverse Vehicle Operations

f. Parking Brake,

g. Shift Levers

h. Steering

i. Mast Operations

j. Lift, Tilt, and Shift Controls

k. All Attachments

l. Backup Alarms

4. CLEAN VEHICLE AND COMPONENTS

a. All Painted Areas

b. Steer and Drive Axle

c. Mast

d. Under Floor Plate

e. Control Panel Area

f. Operator Area

g. Battery Compartment and Tray

h. Motors and Pumps

5. INSPECT ELECTRICAL SYSTEMS

a. Panel Power Connections

b. Check Contactor Tips

c. Check Seat Switch

d. Battery Discharge Indicator, as installed

Current Limiter, as installed

e. Other Electrical Components, as installed

f. Perform Repairs, as required

6. INSPECT HYDRAULIC SYSTEMS

a. All Hydraulic Lines, Hoses, and Fittings

b. Mast and Hose Reel

c. Lift, Tilt, and Shift Cylinders

d. Hydraulic Tank and Breather

e. Hydraulic Pumps

f. Attachment Links

g. Attachment Cylinders

h. Control Valve Operation and Leaks

i. Other Hydraulic Systems, as installed

j. Perform Repairs, as required

7. LUBRICATE VEHICLE

a. Steer Axle

b. Steering Mechanisms

c. Mast, Chains, Rollers, Carriage Attachments

d. Brakes and Parking Brake Linkages

e. Accelerator Pedal

f. Direction Pedal

g. Lift and Tilt Control Hinges

h. Other Lubrication Points, as installed

8. SERVICE BATTERIES AND BATTERY CHARGERS

a. Perform Battery Voltage Tests

b. Check/Clean/Adjust Battery Cables

c. Check/Clean/Adjust Battery Connectors

d. Clean Terminals, Bus Bars and Top of Battery

e. Fill Flooded Batteries with Double-Distilled Water

f. Check Specific Gravity of Cells, as appropriate

g. Charge Battery and Evaluate Overall Health

h. Check Battery Charger Settings and Reprogram Chargers, as required

9. PERFORM ADDITIONAL MAINTENANCE ACTIONS

a. Verify Stencils/Markings Per NAVSUP P-538 and Re-Stencil/Re-Mark as needed, marking should include SWL both sides, VW both sides (and in view of operator on mast assembly), all operator controls, Manufacture name plate, Accredited laboratory UL, MHE safety Certification and EE on three sides

b. Check for Error Codes and Perform Non-Major Repairs, as required, to Clear Code.

c. Replace Faulty Encoder Bearings

d. Check Mast Mounting Trunnions and Re-Torque Bolts, as needed.

e. Repack Leaking Lift, Tilt and Shift Cylinders

f. Adjust Load Chains and Cylinder Rods

g. Change Hydraulic Oil, Filters, and Breathers

h. Adjust Hydraulic Pressure, as required

i. Replace Loose/Warn Hydraulic Pump Motor Mount Bushings

j. Inspect Lights, Backup Alarm, and Associated Wiring; Repair/Replace, as required.

k. Check and Adjust Current Limiter

l. Remove Steer and Drive (Load) Wheels, Inspect and Repack all four (4) Bearings

m. Check Brakes, Wheel Cylinders, and Associated Hardware; Adjust/Repair as required.

n. Re-Torque Drive and Steer Wheel Nuts

o. Evacuate Front and Rear Brake Systems; Replace Fluid with DOT 3 Brake Fluid, or per Tech Manual.

p. Check and Adjust Rear Brake Master Cylinder, Actuator Cable, Pivot Mechanism, Brake Lines, and

Associated Hardware; Repair as required.

q. Adjust Parking Brake and Linkage; Repair as required.

r. Check and Adjust Plugging Distances

s. Adjust Steering Linkage; Repair as required

t. Raise Rear of Vehicle and Manually Test Rear Brake Operation (with brake pedal pressed).

u. Re-Adjust all Brakes, as required

v. Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques.

w. Remove, and inspect the counterweight, mounting bolt, for rust, corrosion, worn threads and threaded base plate surface. Re-install the counterweight, and mounting bolts that are within SAE standards, and re-torque the counterweight bolts to 410 foot pounds, or replace the bolts, and re-thread the base plates that fail the visual inspection, as required.

E. SCOPE OF PERIODIC MAINTENANCE INSPECTION AND SERVICE AERIAL WORK

PLATFORMS (AWP)

1. The Contractor shall inspect the platform's structural components for obvious physical damage, such as cracking, bending and deformation of members or welds. The Contractor shall also inspect the paint for cracking or flaking.

2. The Contractor shall inspect the entire platform for missing or loose bolts, nuts, brackets or supports.

3. The Contractor shall inspect the condition of the tires. The Contractor shall ensure proper inflation and verify tread is not damaged or cut.

4. The Contractor shall inspect all hydraulic lines for any possible loose connections and/or damaged fittings or hoses.

5. The Contractor shall inspect all hydraulic lines, reservoir, fuel tank, engine and gearbox for leaks.

6. The Contractor shall inspect the tank for any possible damage and verify the level of hydraulic fluid.

Level should be midway between 3/4 and full with the boom in the fully lowered and retracted position.

7. The Contractor shall inspect for broken, missing, inoperable or non-calibrated gauges, indicators and warning lights.

8. The Contractor shall rotate basket to the left and to the right, in order to verify the freedom of movement of the Basket.

9. The Contractor shall rotate the steering wheel to the left and to the right. Move aerial platform forward and aft a few feet. Ensure movements are smooth and properly operational.

10. The Contractor shall at the ground control console, position selector switch to "Ground". Turn ignition switch and start engine. Test all functions and verify proper operation.

11. The Contractor shall after starting engine, listen and note any unusual noises, check for any fluid leaks, loss of power, or poor response to controls. Verify the proper operation and correct readings of all gauges and indicators. Verify that the battery is charging.

12. The Contractor shall after the initial warm-up (5 minutes), perform engine turn off at the ground control console.

13. The Contractor shall Reposition the Aerial/Ground selector switch to "Aerial". Place ignition switches to ON position and start engine from aerial platform. After Starting the engine the Contractor shall verify proper operation of the following controls: Boom Up/Down, Rotation CW/CCW, Platform Rotation, Boom Out/In, Drive FWD/ Reverse, Throttle High/Low and Platform Tilt.

14. The Contractor shall raise and lower boom checking for freedom of movement. Extend and retract boom, and check freedom of travel. Swing boom to left and right, and check for freedom of movement.

15. The Contractor shall shutdown the engine using each of the emergency stop switches. Verify entire system shuts down.

16. The Contractor shall after shutting engine off using one of the emergency stop switches, start emergency motor driven hydraulic pump and operate at least one function to verify emergency hydraulic pump is working.

17. The Contractor shall manually operate the off level warning device so the audible alarm can be heard, indicating the level system is functional.

18. The Contractor shall place the rated load on platform, lift the platform to full extension, hold for two minutes, and verify that no drifting or leaking occurs. Contractor shall then fully extend the boom to each side to test vehicle stability.

19. The Contractor shall perform period maintenance requirements identified in the applicable manufacturer Technical Manual.

20. The Contractor shall fill out and sign the attached Aerial Work Platform (AWP) Safety Inspection and Weight Test Certification. The original signed form shall be provided to the ship's Master or his designated representative. A copy of the signed form shall be provided to the MSC Norfolk MHE Program Management office

F. WESLEY Manual Pallet Jacks

1. Verify Stencils/Markings per NAVSUP P-538 and Re-Stencil/Re-Mark as needed.

2. All Hydraulic Lines, Hoses, and Fittings (change if needed)

3. Perform Basic Corrosion Control Utilizing Wire Brush and Spot Paint Techniques

4. Brakes and Brake Linkages

5. Lubricate / inspected all wheels (changed if needed)

7. Equipment to be serviced:

USNS WASHINGTON CHAMBERS - TABLE 1

MANUFACTURER MODEL

MSC

NUMBER

SERIAL

NUMBER

CONDITION REPORT

DISCREPANCIES

HYSTER E40ZG 2302082 G108N09514F PM and Safety Cert HYSTER E40ZG 2302529 G108N11329G PM and Safety Cert HYSTER E40ZG 2302530 G108N11331G PM and Safety Cert HYSTER E40ZG 2302531 G108N11321G PM and Safety Cert HYSTER E40ZG 2302532 G108N11336G PM and Safety Cert HYSTER E60ZG 2302130 G108N09176F PM and Safety Cert HYSTER E60ZG 2302533 G108N11471G PM and Safety Cert HYSTER E60ZG 2302534 G108N11474G PM and Safety Cert HYSTER E60ZG 2302535 G108N11480G PM and Safety Cert HYSTER E60ZG 2302536 G108N11399G PM and Safety Cert HYSTER E60ZG 2302537 G108N11436G PM and Safety Cert HYSTER E60ZG 2302538 G108N11465G PM and Safety Cert HYSTER E100Z 2302539 E098N02444G PM and Safety Cert HYSTER E100Z 2302540 E098N02445G PM and Safety Cert HYSTER E100Z 2302541 E098N02450G PM and Safety Cert HYSTER E100Z 2302542 E098N02451G PM and Safety Cert HYSTER S60FTG 2302543 F187G15960H PM and Safety Cert HYSTER S60FTG 2302544 F187G15961H PM and Safety Cert HYSTER S60FTG 2302545 F187G15962H PM and Safety Cert HYSTER S60FTG 2302546 F187G15965H PM and Safety Cert HYSTER S60FTG 2302547 F187G15971H PM and Safety Cert HYSTER S60FTG 2302548 F187G15976H PM and Safety Cert HYSTER S60FTG 2302549 F187G15979H PM and Safety Cert HYSTER S60FTG 2302550 F187G15980H PM and Safety Cert HUBTEX VQ 45/4 2900099 62072 PM and Safety Cert HUBTEX VQ 45/4 2900100 62073 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800073 05Y10258 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800074 05Y10256 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800075 06Y10326 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800076 06Y10325 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800077 05Y10255 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800078 05Y10257 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800079 06Y10327 PM and Safety Cert

WESLEY INT'L 42-27-

60XTSB

2800080 06Y10328 PM and Safety Cert

GENIE Z-45/25J

IC

2500012 Z452511A-40650 PM and Safety Cert

8. Deliverables: The Contractor shall provide:

A. Contractor shall complete and sign CDRL 0001 Final Inspection form for each unit listed in Table 1.

Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

B. Contractor shall complete and sign CDRL 0002 Fork Inspection form for each unit listed in Table 1.

Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

C. Contractor shall complete and sign CDRL 0003 MHE Safety Certification form for each asset (forklift, side loader, manual pallet jack) listed in Table 1 in accordance with NAVSEA Instruction SW023-AH-WHM- 010 reference (a). Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

D. Contractor shall complete and sign Aerial Work Platform Certification Form for each unit listed in Table

1. Provide a copy to the MHE Program Support Office at MSC Norfolk upon completion of service.

E. Contractor shall send status report of all battery chargers listed in Table 1 to the MHE Program Support Office at MSC Norfolk upon completion of service.

F. Contractor shall coordinate with the technical point of contact to arrange U.S. Government inspection of the MHE/forklifts prior to their return. The inspection will occur on a date mutually agreed upon by the service provider and technical point of contact.

G. Contract must be able to read and understand all items listed on this SOW (Ref a - b and attachments 1 - 4).

H. If additional repair action are needed, YOU MUST contact N10 contract specialist (MSC government representative) for approval prior to completing. Additional work must be submitted on condition found report within 10 days of receipt.

9. Qualifications: The selected Contractor/Service provider must meet the following qualifications:

A. All management and technical personnel performing above listed services must be able to demonstrate the following:

1. Experience performing safety certifications on shipboard-approved MHE in accordance with the requirements set forth in the NAVSEA SW023-AH-WHM-010, NAVSUP PUB 538, and equipment technical manuals.

2. Experience interpreting, trouble-shooting, and resetting HYSTER on-board dash displays.

3. Access to HYSTER proprietary hardware and software required to reset onboard electronics.

4. Able to read and understand the Technical Exhibits and meet all requirement.

B. Contractor shall staff and equip the service with the capability to perform all actions without assistance from MSC personnel.

C. Contractor must have access to technical and diagnostic manuals applicable to the equipment being serviced.

D. Contractor shall have the ability to change/press tires using existing location tire press (if available) and/or obtain alternate services relative to satisfying the MHE asset requirement. If contractor is performing fly in service – service provide is not responsible for changing / press tires due to time restraints.

E. Contractor must be able to perform the required services within the Period of Performance (POP) identified in this Statement of Work document. If additional work is identified, and approved by the Government, the Contractor must have the ability to complete the additional service work by close of the requested POP as well.

F. Contractor shall complete a security form for each employee that will be servicing MHE onboard government installations and submit the information (including, but not limited to name, social security number, and birth date) to Military Sealift Command (MSC)/MSC Security Officer, as requested. The Government will provide approval for personnel to access base installation locations for a pre-determined timeframe (up to one year), as appropriate.

G. Contractor personnel performing maintenance and repairs onboard MSC vessels or affiliated shore activities shall abide by all DOD, Navy, MSC security requirements and clearance procedures required to access U.S. Government facilities and/or MSC customer locations.

10. Quality Assurance Requirements:

A. The requirements of this Work Item shall be accomplished to the satisfaction of the MSCREP.

B. The requirements of this Work Item shall be accomplished in accordance with current Regulatory Body rules and regulations.

11. MSC Norfolk - Technical / Point(s) of Contact (POC):

PRIMARY Norfolk (Technical) POC:

Damian Schmitt Office: (757) 443-1463 Email: damian.schmitt.civ@us.navy.mil

ALTERNATE Norfolk POC:

Robert Hall Office: 757-443-0925 Email: robert.m.hall1.ctr@us.navy.mil

Access paperwork: Will be provided by MSC designated representative, as appropriate.

Services Contract Reporting (SCR)

Services Contract Reporting (SCR) requirements apply to this contract. The contractor shall report required SCR data fields using the SCR section of the System for Award Management (SAM) at following web address:

https://sam.gov/SAM/

Military Sealift Command (MSC) Terms and Conditions

Offers/quotes submitted in response to this solicitation shall not contain nor be subject to the offeror's/vendor's standard commercial terms and conditions. Any offer/quote submitted in response to this solicitation which includes the offeror's/vendor's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

(End of Statement of Work) mailto:damian.schmitt.civ@us.navy.mil mailto:robert.m.hall1.ctr@us.navy.mil https://sam.gov/SAM/

7. The provision at FAR 52.212-1, Instructions to Offerors – Commercial applies to this acquisition and is incorporated by reference. The provision is amended as follows:

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL

ITEMS:

A. Any inconsistency between FAR Provision 52.212-1 and the Addendum to FAR 52.212-1 shall be solved by giving precedence to the Addendum to FAR 52.212-1.

B. After receipt of quotes the Government may, with or without notice, negotiate with and, if desired, seek quote revisions from as many or as few quoters as it, in its discretion, deems appropriate.

C. The term “offeror” or “offer” as used in FAR 52.212-1 shall be understood to mean “quoter” and “quote,” respectively. Further, the term “award” shall be understood to describe the Government’s issuance of an order.

D. The Government will consider all quotes that are timely received and may consider late quotes.

Failure of a quote to address any items required in the submission package may make a quote unacceptable.

E. Paragraph (b) of FAR Provision 52.212-1, Submission of Offers, is amended as follows:

In addition to the quote submission requirements stated in FAR provision 52.212-1, quoters shall provide the following, as part of the quote submission package, no later than the required time and date for quote submission:

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), unit price inclusive of shipping (if any), and extended price.

2. Total Firm Fixed price

3. Price quotes shall be accompanied by the vendor’s published labor rates.

4. Any Discount Terms

5. Estimated time of delivery

6. Technical Submission Requirements

a. For Parts/Supply buy, the quote shall contain a description including part number and title for each item listed in the solicitation to allow the Government to verify that the quoted parts match the requirements listed in the requirements schedule. Brand Name/OEM parts shall be used for this service.

b. Quote shall contain ALL material, labor and travel to complete the entire service requirement without contract modification.

c. It is strongly encouraged that prospective vendors comply with FAR 52.237-1 Site Visit to determine what material is required prior to submitting a quote. Points of contact are in Paragraph 11 of the SOW.

d. Quote must contain proof that the vendors have the experience and capability as specified in paragraph 9 of the statement of work above. Failure to provide proof will be considered non-compliant and will be deemed non-responsive.

7. Responses to the solicitation are due 09 March 2022 @ 1:00 PM, Norfolk, VA time. Quotes may be e-mailed to Kyanee T. McAllister, kyanee.t.mcallister.mil@us.navy.mil and James Van Natta, james.vannatta@navy.mil. Please be sure to copy both parties with your quote. To be considered timely, an E-mail quote must be received in its entirety in the designated E-mail inbox by the due date and time for quote submission. Quotes received after that time will be considered at the Government’s sole discretion. Please reference the solicitation number on your quote.

Primary Point of Contact: Kyanee T. McAllister/757-443-2901/ kyanee.t.mcallister.mil@us.navy.mil Secondary Point of Contact: James Van Natta/757-443-5949/james.vannatta@navy.mil

The Government will consider all quotes that are timely received and may consider late quotes in accordance with 52.212-1. Failure of a quote to address any items listed in the attached submission package may make a quote unacceptable.

8. Provision 52.212-2 Evaluation—Commercial Items (Oct 2014) applies to this acquisition.

(a) The Government may award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement;

(ii) price;

Award shall be made to the lowest priced technically acceptable offeror in LPTA solicitations.

To be considered a technically acceptable solution for a parts procurement, the quoted parts shall meet the solicitation requirements including required parts, delivery dates, and terms and conditions stated in the solicitation.

To be considered a technically acceptable solution for a service, the quoted service shall meet the solicitation requirements including terms and conditions stated in the solicitation. The quote shall state that all aspects of the technical requirement, including required delivery date and part numbers, can be met.

The Government will evaluate quoted pricing for reasonableness utilizing techniques described in FAR 13.106-3.

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror by the Government within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

9. All Offerors must include a completed copy of FAR 52.212-3, Offeror Representations and Certifications – Commercial Items with its offer.

10. Clause 52.212-4 Contract Terms and Conditions – Commercial items (OCT 2018), applies to this acquisition.

11. CLAUSE 52.212-5, CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL

SERVICES (NOV 2021) to this acquisition along with the following FAR Clauses cited in the clause are applicable.

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

XX (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 of Div. C).

XX (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (10) [Reserved]

____ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP 2021) (15 U.S.C. 657a).

____ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

____ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2021) of 52.219-9.

____ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (19) 52.219-14, Limitations on Subcontracting (SEP 2021) (15 U.S.C. 657s).

____ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (SEP 2021) (15 U.S.C.

657f).

XX (22) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (SEP 2021) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (SEP 2021) (15 U.S.C. 637(m)).

____ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (SEP 2021) (15 U.S.C. 637(m)).

____ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

XX (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

____(28) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2020) (E.O. 13126).

XX (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

XX (30)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

XX (31)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

XX (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

XX (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

____ (34) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

____ (35)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

____ (ii) Alternate I (MAR 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

____ (36) 52.222-54, Employment Eligibility Verification (NOV 2021). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

XX (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (MAY 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (MAY 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (JUN 2016) (E.O. 13693).

____ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners

(JUN 2016) (E.O. 13693).

____ (40) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (OCT 2015) of 52.223-13.

____ (41)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-14.

____ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY 2020) (42 U.S.C. 8259b).

____ (43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

____ (ii) Alternate I (JUN 2014) of 52.223-16.

XX (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O.

13513).

____ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

____ (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

____ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

____ (ii) Alternate I (JAN 2017) of 52.224-3.

____ (48) 52.225-1, Buy American--Supplies (NOV 2021) (41 U.S.C. chapter 83).

____ (49) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (NOV 2021) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (JAN 2021) of 52.225-3.

____ (iii) Alternate II (JAN 2021) of 52.225-3.

____ (iv) Alternate III (JAN 2021) of 52.225-3.

____ (50) 52.225-5, Trade Agreements (OCT 2019) 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

XX (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

____ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C.

5150).

____ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021).

____ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (57) 52.232-30, Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

XX (58) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (OCT 2018) (31 U.S.C. 3332).

____ (59) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

____ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

____ (62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(13)).

____ (63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

____ (ii) Alternate I (APR 2003) of 52.247-64.

____ (iii) Alternate II (NOV 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

_____ (1) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

_____ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

_____ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

XX (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

_____ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

_____ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) (41 U.S.C. chapter 67).

XX (7) 52.222-55, Minimum Wages Under Executive Order 13658 (NOV 2020) (E.O. 13658).

XX (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2017) (E.O. 13706).

_____ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.101, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(1) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4.7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

(e) (1) Notwithstanding the requirements of the clauses in paragraphs (a), (b), (c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph (e)(1)in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause—

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. If the subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19.702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) XX (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

_____ (B) Alternate I (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

(xvi) 52.222-54, Employment Eligibility Verification (NOV 2021) (E. O. 12989).

(xvii) 52.222-55, Minimum Wages Under Executive Order 13658 (NOV 2020) (E.O. 13658).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2017) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) (42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause) https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses#i52_222_62 https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses#i52_224_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/part-52-solicitation-provisions-and-contract-clauses#i52_224_3

12. The following additional information is applicable to this acquisition:

CLAUSES INCORPORATED BY REFERENCE

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal

Confidentiality Agreements or Statements-Representation

JAN 2017

52.204-7 System for Award Management OCT 2018 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 SAM Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-21 Basic Safeguarding of Covered Contractor Information Systems JUN 2016 52.204-22 Alternative Line Item Proposal JAN 2017 52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018 52.222-62 Paid Sick Leave Under Executive Order 13706 JAN 2017 52.232-18 Availability Of Funds APR 1984 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.237-2 Protection of Government Buildings, Equipment, and Vegetation APR 1984 52.232-40 Providing Accelerated Payments to Small Business Subcontractors DEC 2013 52.245-1 Government Property JAN 2017 52.245-9 Use and Charges APR 2012 52.247-34 F.O.B. Destination NOV 1991 252.203-7000 Requirements Relating to Compensation of Former DoD Officials SEP 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013 252.203-7005 Representation Relating to Compensation of Former DoD Officials NOV 2011 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7004 Level I Antiterrorism Awareness Training for Contractors FEB 2019 252.204-7008 Compliance With Safeguarding Covered Defense Information Controls OCT 2016 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting OCT 2016 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support MAY 2016 252.204-7016 Covered Defense Telecommunications Equipment or Services—

Representation

DEC 2019

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services—Representation

MAY 2021

252.204-7018 rohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2021

252.211-7007 Reporting of Government-Furnished Property AUG 2012 252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous

Materials

SEP 2014

252.223-7008 Prohibition of Hexavalent Chromium MAY 2011 252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017 252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017 252.225-7048 Export-Controlled Items JUNE 2013 252.232-7003 Electronic Submission of Payment Requests and Receiving…