FCI Lorretto - SOW.pdf
PDF 141 KB Posted
- Attached to
- FCI Loretto Razor Wire
- Solicitation number
- 15BFA025N00000225
About this file
This document is a Statement of Specifications for barbed tape procurement by the Federal Bureau of Prisons for FCI Loretto in Pennsylvania. The solicitation seeks two types of barbed tape: non-reinforced and wire-reinforced, with detailed technical specifications for each. The non-reinforced barbed tape must be 30" in diameter, made from ASTM A 666 spring quality austenitic stainless steel, with specific requirements for barb clusters, coil dimensions, and wire rope attachment. The wire-reinforced version requires 30" diameter coils with 51 loops, fabricated from ASTM 176 stainless steel, and includes additional specifications for core wire, barb clusters, and circumferential clips.
The document outlines shipping requirements to FCI Loretto in Loretto, PA, and details invoice submission procedures to the FCI Pekin Accounting Office. Invoices must include individual weight tickets, contract number, and a breakdown of invoiced items. The Contracting Officer Representative (COR) or Facility Manager will provide direction to the contractor, clarify the scope of work, and oversee inspection and acceptance of delivered items. The government reserves the right to award without further discussion, emphasizing that initial quotes should represent the quoter's best terms from a cost perspective.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 1 - MR Questionnaire - Loretto Razor Wire.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF SPECIFICATIONS
FCI LORETTO
Subject
The Federal Bureau of Prisons, Field Acquisition Office (FAO), Grand Prairie, Texas, intends to make award to an individual or company for the provision of Barbed Tape to be installed on the Federal Correctional Institution (FCI) grounds located at FCI Loretto, Pennsylvania. The Government reserves the right to award without discussion. Therefore, initial quotes should contain the quoter’s best terms from a cost or price standpoint.
SPECIFICATIONS
NON-REINFORCED BARBED TAPE
Barbed Tape Coils shall be 30” in diameter. Each coil of barbed tape shall be extended to a maximum of 40 ft +/- 1 foot. Tape shall be fabricated from ASTM A 666 spring quality austenitic stainless steel, minimum hardness of Rockwell 50-55, nominal 0.025” thick, nominal 1.210” width prior to fabrication.
Clusters of four barbs having a maximum tip radius of 0.005” shall be punched 4” on center. Barb cluster width shall be 1.2”. Barb clusters shall have a minimum length of 1.2”. Barb shall be alternately offset from the tape center line 0.15”-0.45”.
Adjacent coiled loops shall be alternately clipped together, or spot welded at five points of approximately equal radius spacing about the coil loop perimeter. Welded attachments shall withstand a minimum 200 lb load uniformly distributed about the periphery. The 30” diameter coils and five-point uniform radial connections shall interact to produce a concertina coil with a 12” opening between adjacent coil loops.
Provide jacketed steel wire rope attached along the entire length of the roll. Attach wire to each coil loop to preset the maximum barbed tape opening and the 40 feet plus or minus 1 foot length.
WIRE-REINFORCED BARBED TAPE
Barbed Tape Coils shall be 30” in diameter and consist of 51 loops. Each loop shall contain 24+/- 1 barb clusters per loop. Tape shall be fabricated from ASTM 176 stainless steel strip hardened to Rockwell 35-40, 0.025” thick, 1” width prior to roll forming.
Clusters of four barbs having a maximum tip radius of 0.005” shall be punched 4” on center. Barb clusters shall have a minimum length of 1.2”. Barbs shall be alternately offset from the tape center line 0.15”-0.45”.
The stainless-steel strip shall be permanently cold clenched around an 0.098” diameter austenitic stainless steel core wire conforming to ASTM A-580, having a minimum tensile strength of 130 ksi. The barbed tape shall have a minimum 230 degree wrap about the core wire. Barbed tape clips placed around the circumference of the tape shall be such that adjacent loops are rigidly fixed, preventing any slippage of on past another at the point of attachment. Clips shall be fabricated from 0.065”x0.375” stainless steel and capable of withstanding a pull of 200 lb.
Shipping / Freight
Quotes will include shipping / freight charges to ship to FCI Loretto at the following address:
FCI Loretto
772 Saint Joseph Street
Loretto, PA 15940
Invoices
The contractor shall submit monthly invoices to the FCI Pekin Accounting Office for payment. Each invoice shall include copies of individual weight tickets associated with each pickup as supporting documentation. Invoices shall be submitted to the following:
FCI Loretto Financial Management P.O. Box 1000 Cresson, PA 16630
Invoice shall bear the following:
-- Billing address -- Remit to address -- Invoice date and number -- Contract number -- Individual Breakdown of Items invoiced -- A total dollar amount of the invoice
Program Management
The Contracting Officer Representative (COR) or Facility Manager will provide direction to the contractor which clarifies the scope of work as well as inspection and acceptance of delivered items.
Subject
File details come from the government source that posted it. Updated .