FATR.pdf

DD FORM 1423-1, FEB 2001

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

PREVIOUS EDITION MAY BE USED.

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE

7. DD 250 REQ

8. APP CODE

9. DIST STATEMENT

REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF FIRST SUBMISSION

13. DATE OF SUBSEQUENT

SUBMISSION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

15. TOTAL

16. REMARKS

17. PRICE GROUP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Page of Pages

0001AA A X

ICBM/ NIIN 016719796 FD 20202200079

1 TEST INSPECTION REPORT CYLINDER, WEAPON

DI-NDTI-80809B 414 SCMS GUEAB

SD

A D

ASREQ

SEE BLK 16

SEE BLK 16

SEE BLK 16

0 0 0

BLOCK 4: PARAGRAPH 10.2 OF DI-NDTI-80809B CLARIFIED AS FOLLOWS:

A. ALL DIMENSIONS AND TOLERANCES SPECIFIED ON THE MANUFACTURING

DATA SHALL BE LISTED IN ONE COLUMN, WITH THE ACTUAL

CORRESPONDING READING OBTAINED FROM THE INSPECTION OF THE PART

LISTED IN ANOTHER COLUMN.

B. MATERIAL PROCESSING, INCLUDING FINISH REQUIREMENTS (PLATING,

HEAT TREATMENT, WELDING ANODIZING, PAINTING, ETC.) UTILIZED IN THE

MANUFACTURE OF “FIRST ARTICLE” ITEMS SHALL BE IDENTIFIED, AND

CERTIFIED AS CONFORMING TO APPLICABLE REQUIREMENTS. A COPY OF

THE PURCHASE ORDER CERTIFYING THE PROCESS ACCOMPLISHED AT

OTHER THAN CONTRACTOR FACILITY SHALL BE INCLUDED.

BLOCK 9:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT

OF DEFENSE AND

U.S. DOD CONTRACTORS ONLY FOR ADMINISTRATIVE AND OPERATIONAL

USE DETERMINED [DATE OF DOCUMENT]. OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO ICBM SYSTEMS DIRECTORATE, 6014

DOGWOOD AVE BLDG 1258, HILL AFB, UT 84056-5826.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C. 2751 ET

SEQ.) OR THE EXPORT ADMINISTRATIVE ACT OF 1979, AS AMENDED, TITLE

50, U.S.C., APP. 2401, ET SEQ. VIOLATION OF THESE EXPORT-CONTROL LAWS

IS SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATION OF THIS DOCUMENT IS CONTROLLED UNDER DODD 5230.25

AND AFI 61-204.

DESTRUCTION NOTICE: FOR CLASSIFIED DOCUMENTS, FOLLOW THE

PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY

PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R,

INFORMATION SECURITY PROGRAM REGULATIONS, CHAPTER

VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD

THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF

THE DOCUMENT.

NSP

0.00

Richard Howe

HOWE.RICHARD.W.1574025490

Digitally signed by

HOWE.RICHARD.W.1574025490

Date: 2022.02.15 11:45:55 -07'00'

20220215 David Tippy

TIPPY.DAVID.JANSON.115

3947690

Digitally signed by

TIPPY.DAVID.JANSON.1153947690

Date: 2022.02.24 10:19:08 -07'00'

20220224

Adobe Professional 8.0

Controlled by: DLA Aviation Ogden Controlled By: AUBA

CUI Category: Controlled Tech info Distribution/ Dissemination Control: FEDCON

POC: michelle.mihu@us.af.mil

CUI

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ________ TM _______ OTHER

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

16. REMARKS (Continued)

DD FORM 1423-1, FEB 2001 Page of Pages

001 A X

ICBM/ NIIN 016719796 FD 20202200079

BLOCK 10, 11, 12 & 13 INITIAL SUBMITTAL:

CONTRACTOR SHALL SUBMIT MEASUREMENT DATA NLT 45 DAYS AFTER COMPLETION OF WORK. GOVERNMENT WILL BE ALLOWED 30 DAYS AFTER RECEIPT FROM CONTRACTOR TO REVIEW FOR APPROVAL/ DISAPPROVAL/COMMENTS.

CONTRACTOR SHALL SUBMIT REVISED QUALIFICATION TEST REPORT INCORPORATING GOVERNMENT COMMENTS, IF

APPLICABLE, NLT 15 DAYS AFTER RECEIPT FROM GOVERNMENT.

BLOCK 14: COMPLETE MAILING ADDRESS IS:

414 SCMS RICH HOWE

6031 GUM LANE

BLDG 1227

HILL AFB UT 84056

POC: RICH HOWE Cell Phone 801-391-1471 Office Phone 801-586-5998

CUI

CUI

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12-M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package;

TM - Technical Manual; Other - other category of data, such as "Provisioning,""Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Signature of preparer of CDRL.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref. DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14.; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use the data shall be governed by the pertinent provisions of the contract.

DD FORM 1423-1 (BACK), FEB 2001

CUI

CUI