Printer-Plotter,_Requirements_Documen_Amd_1.pdf

Printer-Plotter

Requirements Document

For

704th Test Group/846th Test Squadron

1.0 PURPOSE

The 704th Test Group (704 TG) mission is to be the premier provider of unique test and evaluation capabilities relevant to tomorrow’s warfighter through world-class people improving technical excellence, cost-effectiveness, and agility. The 846th Test Squadron (846 TS) is assigned to the 704 TG. The 846

TS’s primary test capability is the Holloman High Speed Test Track (HHSTT) where they utilize rocket powered sled train to simulate flight like environments and scenarios with the control and recovery of a ground based system.

The 846 TS utilizes wide-format printer-plotters to print hardcopies of engineering drawings and specifications to model and machine various items related to rocket sled testing. The current 846 TS printer-plotters have exceeded the recommended service life and need to be replaced.

2.0 SCOPE

The printer-plotters are being procured as a brand name or equal; the brands and model numbers for comparison are the Kyocera KM-4820W, the KIP 7170K, and the KIP 7582 FMP.

The offeror shall provide two wide-format printer-plotters that meet the minimum salient characteristics listed below. The brands and models listed above are expected to meet the minimum requirements below and are provided for offeror information purposes.

2 wide-format printer-plotters o Black & white capable of producing 5.8 D-Size prints per minute o Memory: Standard 512MB with a minimum of 250 GB HDD o 600 x 600 dpi o USB printing o 2 test rolls o Max capacity 500’ 22” & 34” per 3” diameter o Single sheet bypass o Output width 8.5” to 36” o Output length 11” to 36” o Standard drawing size: architectural / ANSI / Metric o Multifunctional devices to include scanning

Two surge protectors, if printers-plotters do not have automatic voltage regulators installed on equipment

24 toner cartridges; 12 cartridges for each printer-plotter.

o Each cartridge must be capable of printing 6,000 feet per cartridge at a minimum of 5% coverage.

The contractor will be required to remove the following equipment and provide trade-in credit:

Kyocera KM-4850W, serial number 200512

Xerox 510, serial number 803

Only new equipment will be considered. Offers shall not include used or refurbished items

3.0 MILESTONES

The contractor shall deliver two printer-plotters no later than 30 days after receipt of order.

4.0 DELIVERABLES

The contractor shall deliver the products to:

704 TSS/XPI

1521 Test Track Road, Building 1174, Room 218

Holloman AFB, NM 88330