15R15_Additional_Information__1.docx

DOCX document 16 KB Posted

Attached to
International Standards Organization (ISO) Shelter Federal contract opportunity
Solicitation number
FA8751-15-R-0015
Issued by
Department of the Air Force Materiel Command Research Laboratory

View the file

Other files for this federal contract opportunity

Other files attached to International Standards Organization (ISO) Shelter, newest first.
File Type Posted
15R15_Additional_Information__3.docx DOCX document
15R15_Additional_Information__2.docx DOCX document
Attachment_1__AFRL_D-CEE_Mobile_SCIF_Requirements_v_20141114-1416.pdf PDF
Attachment_2_Offeror_Representations_and_Certifications--Commercial_Items_(Short_Form).docx DOCX document

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

FA8751-15-R-0015

ADDITIONAL INFORMATION

A. Clarifications and Additions to Performance Characteristics

1. Can a tongue trailer be used? Do you require a 5th wheel trailer?

The trailer can have a tongue as long as it is capable of receiving a pintle hook adapter

2. Weight of rack loads and generator placement?

Rack load will be minimum 200-400lbs, generator will be trailer mounted (see question 7, below)

3. Is heat pump permanently installed or off board?

Permanent installation

4. What lighting connector does the trailer need to support?

Lighting connections should be supported by a standard tractor trailer truck. We will be pulling with a standard semi so it should be a 7-pin tractor trailer plug.

5. What are the rack dimensions?

The rack width is 24", depth is 42", and height is 47". The long side of the racks will be against the shelter exterior wall

6. What type of fiber is to be installed?

Fiber should be single mode with ST connectors

7. Is the generator built into the shelter?

No. The generator should be trailer mounted in front of the shelter. Shelter door opens to the rear of the trailer.

8. What STC sound Level do you require – is it STC 50 (which is rather typical of SCIFs)?

Given the nature of the facility, I don't expect us to support amplified voice capabilities such as VTC, etc so STC-45 should suffice.

9. This T-SCIF will meet RFI/EMI requirements – correct?

Yes, the T-SCIF must meet RFI/EMI requirements and STC 45 acoustic protection.

File details come from the government source that posted it. Updated .