2628719_ATTACH.pdf

6 1/4 LBSITEM WT.

2169 MODMARCH 87DD

FORM

REQDP/N

QTY

SIZE:

(INCHES UNLESS SPECIFIED)

TOLERANCES ON FRAC. ± 1

8, DECIMAL ± .10, ANGLES ± 1°

DESCRIPTION

NOMENCLATURE OR

LEVEL B:

LEVEL A:

CLOSURE

IAW: ASTM-D1974

IAW: ASTM-D6251

COMPUTER GENERATED

SPECIFICATION

MATERIAL

SPI NO. F01-203-4624

CODE ID

98747

DESIGN FRAGILITY G

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

ILL. NATIONAL STOCK NO.PART OR DRAWING NO. CURRENT

SPECIAL MARKINGS:

A) SPI NO. F01-203-4624

PRESERVATIVE: N/A

UNSERVICEABLE METHOD: GX

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

MARKING IAW MIL-STD-129

001QUP

ICQ 000

CNTR O.D.

LEVEL B:

ITEM DIM

LEVEL A:

CNTR I.D.

LEVEL B:

LEVEL A:

GROSS WT LBS

ITEM NOMENCLATURE

PACKING

LEVEL

GROSS CU FT

B

A

ASTM-D5118

ASTM-D6251

REV

DATE

ORIGINAL CHK.

AUTH.

P.S.

SPECIAL PACKAGING INSTRUCTION

12 3/8

14 5/8

18 5/8

16 3/8

8 3/4

1 1/2

LENGTH WIDTH DEPTH

12 5/816 5/8

LEVEL A LEVEL B

1.734

A III

1.026

SPI NO. (TPO)

SHEET 1 OF 4

A/R

A/R

TAPE, PACKAGING

TAPE, FILAMENT

WRAP

BAG, BARRIER

PROTECTIVE SLEEVE

CUSHIONS, END

CUSHIONS, SIDE

CUSHIONS, TOP & BOTTOM

EXTERIOR CONTAINER

3 X AS REQUIRED

3/4 X AS REQUIRED

21 X 14

27 X 22 (ID)

23 3/8 X 8 1/4 X 1/8

8 X 4 X 2

16 X 4 X 2

16 X 12 X 2

16 X 12 X 8 (ID)

ASTM-D5486 TYPE I OR V

ASTM-D5330 TYPE II, GRADE B

MIL-PRF-81705 TYPE II, CL. 2

MIL-DTL-117 TYPE I, CL. F, STYLE 1 (ESD)

ASTM-D4727 CF, DOM, SW, GR. 200

MIL-PRF-26514 TYPE III, C. 2, GR. B

MIL-PRF-26514 TYPE III, C. 2, GR. B

MIL-PRF-26514 TYPE III, C. 2, GR. B

ASTM-D5118 RSC, CF, WR, SW, V3c

-9

-8

-7

-6

-5

-4

-3

-2

-1

K. KNIGHTON

T. ZIMMERMAN

D. STEPHENS

G. HOENIKE

5841-01-203-4624 WF586R212H03

TRANSMITTER ASSEMBLY

F01-203-4624

B

V3cRSC

D

99085

REVISIONS

DESCRIPTIONLTR DATE

SW

MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.

WRCF

SERVICEABLE METHOD: GX

C) ESD LABELS

D

UPDATED SPECS/STANDARDS, CHANGED

FORMAT, ADDED NEW WOOD STATEMENT

10139

A2

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI MUST BE REPACKAGED TO MEET

THE REQUIREMENTS OF THIS SPI REVISION.

NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES

EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 5: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 2 OF 4

ITEM NOMENCLATURE

98747

CODE ID

NOTES

1. WRAP TRANSMITTER IN REF.-7, AND DO NOT TAPE WRAP AROUND ITEM AS IT MAY CAUSE ELECTROSTATIC DISCHARGE.

THEN INSERT ITEM INTO BARRIER BAG, REF.-6, AND SEAL.

2. WRAP PROTECTIVE SLEEVE, REF.-5, AROUND BAGGED TRANSMITTER AND SECURE WITH TAPE, REF.-8.

3. PLACE SLEEVED TRANSMITTER INTO CUSHIONED CONTAINER AND FILL VOIDS WITH CUSHIONING EQUAL TO OR BETTER

THAN PPP-C-1797, TYPE II (ESD). CLOSE AS REQUIRED.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

TRANSMITTER ASSEMBLY

F01-203-4624

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 3 OF 4

ITEM NOMENCLATURE

98747

CODE ID

FLUTE

DIRECTION

TYP.

DETAIL A

PROTECTIVE SLEEVE (SW)

TRANSMITTER ASSEMBLY

F01-203-4624

-5

F L U T E

D I R E C T I O N

F L U T E

D I R E C T I O N

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 4 OF 4

ITEM NOMENCLATURE

98747

CODE ID

IT

EM

RE

FE

RE

NC

E

TRANSMITTER ASSEMBLY

F01-203-4624

-5 -2

-7

-6

-9-1

-3-2-4

-8