Design.pdf

DATE REV (A) 12–AUG–1965

PAGE 10.5.6.42.1 PAGE 10.5.6.42.1

SH 1 OF 3

C45HN C45HN

CAGE CODE 81205

BOEING PART STANDARD

SH 1 OF 3

CONNECTOR, ELECTRIC, PLUG,

MALE, TEST PROBE ADAPTER,

CLASS E

******* PSDS GENERATED *******

BOEING

PART

NUMBER

BACC45HN

VENDOR

PART

NUMBER

P–202817–

SHELL

SIZE

A ± .030

OPERATING

POSITION

A ± .040

INDEXING

POSITION

B ± .015

C ± .015

D

NOMINAL

E

NOMINAL

12A 12– 12 2.823 3.073 1.956 .800 1.500 1 3/4–8UN

16A 16– 16 2.823 3.073 2.468 1.300 2.000 2 1/4–8UN

20A 20– 20 2.823 3.073 3.030 1.800 2.500 2 3/4–8UN

24A 24– 24 2.823 3.073 3.560 2.300 3.000 3 1/4–8UN

28A 28– 28 2.823 3.073 4.062 2.750 3.500 3 3/4–8UN

(CONTINUED)

BOEING

PART

NUMBER

BACC45HN

F G H ± .015

K ± .045

L N ± .080

OPERATING

POSITION

N ± .100

INDEXING

POSITION

P ± .025

INSERT

ARRANGEMENT

BACI10D

12A 1.708 1.143 .912 1.000 1.937 1.254 1.504 1.734 P. 10.7.6.9

16A 2.208 1.643 1.412 1.000 2.437 1.254 1.504 2.234 P. 10.7.6.10

20A 2.708 2.143 1.912 1.000 2.937 1.254 1.504 2.734 P. 10.7.6.11

24A 3.208 2.643 2.412 1.000 3.437 1.254 1.504 3.234 P. 10.7.6.12

28A 3.708 3.113 2.853 1.000 3.937 1.254 1.504 3.734 P. 10.7.6.13

PAGE 10.5.6.42.2 PAGE 10.5.6.42.2

SH 2

C45HN C45HN

CAGE CODE 81205

BOEING PART STANDARD

SH 2

CONNECTOR, ELECTRIC, PLUG,

NOTES

1 FOR EXAMPLE OF COMPLETE PART NUMBER, SEE USAGE AND APPLICATION INFORMATION.

2 CHAMFER NOT REQUIRED FOR #18 SOCKET CONTACT INSERT HOLES.

3 LOCATED INSIDE MALE SHELL.

PROCUREMENT SPECIFICATION

BACC45HN SHALL MEET THE REQUIREMENTS OF BPS–C–11 WITH THE EXCEPTIONS OF

PARAGRAPHS 3.2, 3.3.1, 3.3.2, 3.4.2.1, 3.4.3, 3.7.10, 3.7.15, 3.7.16, 3.7.25, 4.1.1(a), 4.1.1(c), 4.2, 4.4, 4.5.1, 4.7.10, 4.7.25, 5.1.1(a), 5.1.1(b), AND 6.3.

PIN OR SOCKET CONTACTS FORM A PART OF THIS STANDARD AND SHALL BE SHIPPED

WITH CONTACTS INSTALLED IN THE CONNECTOR.

BACC45HN SHALL BE MECHANICALLY CAPABLE OF INDEXING TO EVERY ALTERNATE

INDEXING POSITION DEFINED FOR ALL INSERTS OF BACI10D.

A DUST COVER SHALL FORM A PART OF THIS STANDARD AND SHALL BE SHIPPED WITH

THE CONNECTOR.

MATERIAL

ITEM NOMENCLATURE MATERIAL FINISH

1 COUPLING NUT ALUMINUM 6061–T6 ALUMINUM OXIDE HARDCOAT

2 SEAL GASKET BUNA–N RUBBER NONE

3 SEAL BUNA–N RUBBER NONE

4 MALE SHELL ALUMINUM 6061–T6 ALUMINUM OXIDE HARDCOAT

5 SLEEVE CLAMP ALUMINUM 6061–T6 ALUMINUM OXIDE HARDCOAT

6 INDEXING SLEEVE ALUMINUM 6061–T6 ALUMINUM OXIDE HARDCOAT

7 INSERT RETAINER ALUMINUM 6061–T6 ALUMINUM OXIDE HARDCOAT

3 SNAP RINGS STAINLESS STEEL

302 SERIES

NONE

FINISH

SEE MATERIAL SECTION.

MARKING

CONNECTOR SHALL BE CLEARLY AND PERMANENTLY MARKED WITH THE BOEING AND

MANUFACTURER’S PART NUMBER. MARKING SHALL NOT BE PLACED ON THE COUPLING

NUT.

CONTACT IDENTIFICATION NUMBERS SHALL BE MARKED ON THE REAR OF THE

CONNECTOR INSERT. MARKING SHALL BE OF CONTRASTING COLOR, (WHITE

PREFERRED), DURABLE AND CLEARLY READABLE.

THE RIGID INSULATION AND INDEXING SLEEVE SHALL BE PROVIDED WITH THREE UNEQUALLY

SPACED REGISTRATION KEYWAYS FOR POSITIVE LOCATION OF THE INDEXING SLEEVE.

PAGE 10.5.6.42.3 PAGE 10.5.6.42.3

SH 3

C45HN C45HN

CAGE CODE 81205

BOEING PART STANDARD

SH 3

CONNECTOR, ELECTRIC, PLUG,

PROCUREMENT

PYLE–NATIONAL COMPANY, CHICAGO, ILLINOIS (CAGE CODE 49367)

THE SUPPLIERS LISTED AND THEIR AUTHORIZED DISTRIBUTORS ARE THE ONLY

APPROVED SOURCES FOR THE ABOVE QUALIFIED PRODUCTS. CHANGES IN PRODUCT

DESIGN OR QUALITY WITHOUT PRIOR BOEING APPROVAL MAY RESULT IN SUPPLIER

DISQUALIFICATION. SUPPLIERS OF COMPETITIVE PRODUCTS MAY APPLY TO A MATERIEL

DEPARTMENT OF THE BOEING COMPANY FOR QUALIFICATION.

USAGE AND APPLICATION INFORMATION

BACC45HN IS A TEST PROBE CONNECTOR AND IS PRIMARILY TO BE USED IN CONJUNCTION WITH

GROUND SUPPORT TEST EQUIPMENT.

BACC45HN MATES WITH BPS–C–11 CLASS A, E AND CLASS PE FEMALE CONNECTORS.

FOR PIN CONTACT STANDARD, SEE BACC47BH. FOR SOCKET CONTACT STANDARD, SEE BACC47BJ.

BACC45HN( )A SUPERSEDES AND REPLACES THE BACC45HN( ) COVERED BY SHEETS 1 AND 2 OF

THIS STANDARD.

CODING

BOEING PART CODE

CONNECTOR, ELECTRIC,

PLUG, MALE, TEST PROBE

ADAPTER, CLASS E

12 SHELL SIZE

INSERT ARRANGEMENT

(SEE BACI10D)

PIN CONTACT (FOR SOCKET

CONTACT REPLACE WITH

LETTER “S”)

BAC C45HN 12A 01 P

THE BOEING COMPANY

CONNECTOR, ELECTRIC, PLUG, MALE,

TEST PROBE ADAPTER, CLASS E

12 SHELL SIZE INSERT ARRANGEMENT

(SEE BACI10D)

PIN CONTACT

VENDOR PART CODE

P–202817 311 PNK– 12 –

SEE D–590 INDEX BOOK FOR GENERAL

INFORMATION ON THE USE OF PART STANDARDS

(PREFACE AND NOTICES), AND FOR

SUBSTITUTION CLASS DEFINITION

(SUBSTITUTION LIST).