Questions_and_Answers_19_May_2016.docx
DOCX document 15 KB Posted
- Attached to
- Retrofit/rebuild of O, D, & I. D. Grinders
- Solicitation number
- FA8224-16-R-0034
About this file
Questions and Answers from Pre-proposal Conference.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Grinder_Rebuild_PWS_16_May_2016_Revision_1.docx | DOCX document | |
| FA8224-16-R-0034-0001.docx | DOCX document | |
| Direction_to_Hill_and_Building_238.pdf | ||
| Copy_of_Industry_Day_-_Visitor_List.xlsx | XLSX spreadsheet | |
| FA8224-16-R-0034.pdf | ||
| Grinder_Rebuild_PWS_4_Feb_2016.docx | DOCX document | |
| CDRL_Package.pdf | ||
| Grinder_Rebuild_PWS_10_Mar_2016_Draft.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
19 May 2016 Pre-Proposal Site Visit Questions and Answers
Q: Can we work on weekends?
A: Work will be in accordance with paragraphs 4.5.1 and 3.1.1 of the PWS.
Q: Will you specify a paint type, color, etc.?
A: See update PWS paragraph 3.1.1 dated 19 May 2016, Revision 1 Q: Is there a preference for paint application (e.g. brush, spray, etc.)?
A: Either methodology will suffice Q: Can components be shipped off base for painting?
A: No, all painting shall be done on-site.
Q: Does the Automatic Dressing Unit need to be repaired on machines PM#’s 7690 & 7691?
A: Automatic Dressing Unit does not need to be repaired.
Q: Do the belt grinding attachments need to be repaired and replaced?
A: No, they just need to be re-installed and made operational as verified by the SME.
Q: Does the Super Finisher attachment on PM# 7690 need to be repaired and replaced?
A: No, it just needs to be re-installed and made operational as verified by the SME.
Q: What is the Tailstock Center Taper on the GAP Grinders?
A: 16 Jarno Q: Can you clarify what is an acceptable format for the electronic submissions in Section L 2.6.1.1?
A: Acceptable and preferred format would be a DVD-RW; the Government cannot accept flash drives as they are not permitted on any Government computer.
Q: Where are the hard copies to be mailed/delivered to?
A: Send all hard copies to the following address:
| Attention: David Bryan / Tyler Fitz |
| 6038 Aspen Ave. Bldg. 1289 Upstairs |
| Hill AFB, UT 84056 |
File details come from the government source that posted it. Updated .