Attachment_2_-_Special_Packaging_Instructions_-_NSN_5806_and_8913.pdf

53 LBSITEM WT.

2169 MODMARCH 87DD

FORM

REQDP/N

QTY

SIZE:

(INCHES UNLESS SPECIFIED)

TOLERANCES ON FRAC. ± 1

8, DECIMAL ± .01, ANGLES ± 1°

DESCRIPTION

NOMENCLATURE

SEE CAUTION NOTICES PAGE 2.

LEVEL B:

LEVEL A:

CLOSURE

IAW: ASTM-D6251

IAW: ASTM-D6251

COMPUTER GENERATED

SPECIFICATION

MATERIAL

SPI NO. F01-041-0179

CODE ID

98747

DESIGN FRAGILITY G

SPEC STYLE TYPE CL VRTY GR TR

AS SPECIFIED BELOW AND BILL OF MATERIALS

ILL. NATIONAL STOCK NO.PART OR DRAWING NO. CURRENT

SPECIAL MARKINGS:

A) SPI NO. F01-041-0179

PRESERVATIVE: MIL-PRF-23827

METHOD OF PRESERVATION: 20

CLEANING & DRYING: IAW MIL-STD-2073

MILITARY PRESERVATION IAW MIL-STD-2073

B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.

MARK THE SPI NUMBER ON ONE SIDE OF THE CONTAINER.

MARKING IAW MIL-STD-129

001QUP

ICQ 000

CNTR O.D.

LEVEL B:

ITEM DIM

LEVEL A:

CNTR I.D.

LEVEL B:

LEVEL A:

GROSS WT LBS

ITEM NOMENCLATURE

PACKING

LEVEL

GROSS CU FT

B

A

ASTM-D6251 (MOD)

ASTM-D6251 (MOD)

REV

DATE

ORIGINAL CHK..

AUTH.

P.S.

SPECIAL PACKAGING INSTRUCTION

72 1/4

18 1/4

8 1/2

LENGTH WIDTH DEPTH

12 3/4

LEVEL A LEVEL B

40.556

A III

40.556

SPI NO. (TPO)

SHEET 1 OF 4

A/R

SEALS

STEEL STRAPPING

WRAP

END PADS

TOP SADDLE ASSY (SEE DETAIL 1)

BOTTOM SADDLE ASSY (SEE DETAIL 1)

SADDLE CHANNEL

SKIDS

1 X .75 X .023

.75 X .023 X A/R

AS REQUIRED

46 X 12 3/4 X 2 1/4

46 X 9 3/4 X 4 1/2

46 X 5 1/4 X 4 1/2

12 3/4 X 1 3/4 X 3/4

4 X 4 (NOM) X 28

ASTM-D3953 REG DUTY, FINISH A

ASTM-D 3953 TYPE 1, REG DUTY, FINISH A

MIL-PRF-121 TYPE I

A-A-59135 CLASS 1, GRADE A

A-A-59135 CLASS 1, GRADE A

A-A-59135 CLASS 1, GRADE A

ASTM-D6199 CLASS 2, GRADE 2

ASTM-D6199 CLASS 2, GRADE 2

-8

-7

-6

-5

-4

-3

-2

-1

K. KNIGHTON

D. STEPHENS

T. ZIMMERMAN

K.W. OLSON

1560-01-074-3189 FJ160J711013-1

FLAP, WING LANDING, (AC/A-10)

F01-041-0179

SEE NOTES PAGE 2.

CAUTION

B

A A

D

80094

REVISIONS

DESCRIPTIONLTR DATE

UPDATED SPECIFICATIONS/STANDARDS,

C

ADDED WOOD STATEMENT

07011

2III

4880 18 1/4

4678 12 3/4

D 10004ADDED NEW WOOD STATEMENT

DD 2169C MODMARCH 87

FORM

COMPUTER GENERATED

CAUTION NOTICES

NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE REPACKAGING IF

THE INTEGRITY OF THE SPI IS MAINTAINED.

NOTICE 2: OTHER NSNs MAY BE ASSIGNED TO THIS SPI BUT MAY NOT BE SHOWN ON THE SPI.

NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES

EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.

NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED

CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.

NOTICE 5: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 2 OF 4

ITEM NOMENCLATURE

98747

CODE ID

NOTES:

F01-041-0179

FLAP, WING LANDING, (AC/A-10)

1. APPLY PRESERVATIVE AT END OF FLAP ASSEMBLY AS SHOWN IN DRAWING AND WRAP WITH

REF.-6. USE ASTM-D6123, TYPE II AS REQUIRED TO ATTACH REF.-6 AROUND AREA. DO NOT

TAPE TO ITEM SURFACE.

2. USE A-A-1936, TYPE II CONTACT ADHESIVE, IF NEEDED, TO GLUE TOGETHER AND CREATE

REF.-3 AND -4.

INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES

REVISION OF ISPM NO. 15

REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).

WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES (ISPM

NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 3 OF 4

ITEM NOMENCLATURE

98747

CODE ID

F01-041-0179

FLAP, WING LANDING, (AC/A-10)

D E T A I L

COMPUTER GENERATED

SPECIAL PACKAGING INSTRUCTION SPI NO. (TPO)

SHEET 4 OF 4

ITEM NOMENCLATURE

98747

CODE ID

F01-041-0179

FLAP, WING LANDING, (AC/A-10)

8 -

A P P L Y

P R E S E R V A T I V E

A T

E N D S

O F

F L A P

A S S E M B L Y

S E E

D E T A I L

S E E

D E T A I L

I T E M

R E F E R E N C E